80CF15-60 code compliant

Summary

Product identification

The AquaLine 80CF15 Fiberglass Pressure Vessel is designed for continuous, long-term use as a housing for AquaLine microfiltration elements.

• Model: AquaLine 80CF15
• Approx. Weight: 60 LB (27 KG)
• Approx. Weight With Filter: 73 LB (33 KG)

Operating limits

• Design Pressure: 150 PSIG at 140°F/180°F (1.03 MPa at 60°C / 82°C) (PVC/PET dependent)
• Min. Operating Temperature: 20°F (-7°C)
• pH Range: 3-11 (do not operate outside this range)
• Factory Test Pressure: CE/ASME 225 PSIG / 165 PSIG (1.55 MPa / 1.13 MPa)
• Qualification Pressure: 900 PSI (6.20 MPa)

Mechanical / hydraulic

The vessel shell is constructed from Filament Wound Epoxy/Glass composites. Head locking grooves are integrally wound in place.

Ports:

• 3" Feed Port (CD3MWCuN*)
• 1" FNPT Drain Port (CD3MWCuN*)
• 1/4" FNPT Air Vent Port (CD3MWCuN*)
• 3" Product Port (CD3MWCuN*)

Standard Head Assembly Materials (for 140°F application):

• Shell: Filament Wound Epoxy/Glass composites
• Feed Port: CD3MWCuN*
• Port Seals: Sq-Seal-EPDM
• Bearing Plates: 6061-T6 Aluminum alloy (Hard anodized)
• Sealing Plates: Engineering Thermoplastic - PVC+
• Product Port Adapter: Engineering Thermoplastic - PVC+
• Product Port Seals: O-Ring - EPDM
• Port Retainer Rings: 316 Stainless Steel
• Head Seals: O-Ring - EPDM
• Handle Assembly: 316 Stainless Steel
• Plug: Engineering Thermoplastic - PVC+
• Plug Retainer Ring: 316L Stainless Steel
• Plug Seal: O-Ring - EPDM
• Quick Release Spiral Ring: 316 Stainless Steel
• Saddle: Engineering Thermoplastic
• Strap Assy.: 304 Stainless Steel-PVC Cushion
• Strap screw: 5/16-18 UNC, 18-8 Stainless Steel

Optional Head Assembly Materials (for 180°F application):

• Sealing Plates: Engineering Thermoplastic - PET
• 3" Product Port Adapter: Engineering Thermoplastic - PET
• 3" Seal for Product Port Adapter: Ethylene Propylene - O-Ring
• Head Seal: Ethylene Propylene O-Ring
• Product Port Seal: Ethylene Propylene O-Ring
• Plug: Engineering Thermoplastic - PET
• Plug Seal: Ethylene Propylene O-Ring

Feed Port Configuration:

• A: 1" FNPT End
• G: 3" Grooved End
• Standard configurations include 1A 4G. Optional configurations like 1A 2G or 1A 2G 4G are available.

Certification

• Certified by Pentair with Compliance to ASME Section X Hydro testing at 1.1 times.
• ASME code stamped and National Board Registered.
• CE Marking.

Precautions

• DO read, understand, and follow all instructions.
• DO mount the shell on horizontal/vertical members using compliant vessel supports; tighten hold down straps just snug.
• DO align and center side ports with the manifold header.
• DO use flexible type IPS grooved-end pipe couplings, or equivalent, at side ports; allow full 0.125 inch gap between port and piping.
• DO provide flexibility in, and support for piping manifolds.
• DO lubricate seals sparingly using non-petroleum based lubricants (e.g., Parker Super O-lube®, Glycerin, or suitable silicone-based lubricants).
• DO provide overpressure protection for the vessel, set at not more than 105% of design pressure.
• DO inspect end closures regularly; replace deteriorated components.
• DO NOT work on any component until pressure is relieved.
• DO NOT make rigid piping connections to ports or clamp vessel in any way that resists growth of the fiberglass shell under pressure.
• DO NOT pressurize vessel until verifying the Locking Ring is in place and fully seated.
• DO NOT operate vessel at pressure and temperature in excess of its rating.
• DO NOT tolerate leaks or allow end closures to be routinely wetted.

Ordering information

For complete information on proper use of the vessel, refer to the AquaLine User Guide No 97676. To order, check the required features using the provided chart and submit a purchase order. Optional materials or features not listed require consultation with the factory.

---

Disclaimer: This summary is based solely on the extracted text. It may miss figures, footnotes, or revisions present in the full OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror