CFB-PB10 Lead Reduction Molded Block Cartridge

Summary

Product Identification

The CFB-PB10 is a Lead Reduction Modified Molded Block Cartridge, featuring proprietary Fibredyne™ technology. This technology integrates powdered activated carbon and lead adsorbent material onto a cellulose-free synthetic fiber matrix. The cartridge is designed to resist plugging, offer long life, and provide a low pressure drop.

It is manufactured entirely from FDA-compliant materials and is suitable for residential, food service, commercial, and industrial applications.

Operating Limits

• Temperature Rating: 40°F-180°F (4.4°C-82.2°C)

Mechanical / Hydraulic

• Model: CFB-PB10
• Maximum Dimensions: 2⅞" x 9¾" (73mm x 248mm)
• Initial Pressure Drop (ΔP): 8.1 psi @ 1 gpm (0.6 bar @ 3.8 Lpm)

Product Water

The CFB-PB10 cartridge provides:

• Nominal Micron Rating: 0.5-micron
• Cyst Reduction: 99.95% reduction of Cryptosporidium and Giardia cysts (tested using NSF Standard 53 protocol)
• Lead Reduction: Effective through 2000 gallons
• Chlorine Taste & Odor Reduction: >5,000 gallons @ 1 gpm (>18,900 L @ 3.8 Lpm)
• Other Reductions: High chlorine taste & odor and bad taste and odor reduction
• Capacity: Premium dirt-holding capacity

Note: All performance claims are based on manufacturer's internal testing. Micron ratings are based on 85% or greater removal of given particle size. Estimated capacity uses 2 ppm free available chlorine at 0.5 ppm breakthrough. Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.

Materials of Construction

• Filter Media: Bonded PAC
• End Caps: Polypropylene
• Netting: Polyethylene
• Gaskets: Santoprene™

---

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit. NOTE: Performance capacity depends on system design, flow rate, and certain other application conditions. Certain states require system registration or certification for health-related contaminant reduction claims. NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be flushed with sufficient water to remove all traces of fines prior to using the water.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror