Datasheet summary
CFB-Plus Molded Block Cartridges
Engineering summary from PDF text extraction for CFB-Plus Molded Block Cartridges. Verify every value with the OEM datasheet.
Summary
Product Identification
The CFB-Plus series Modified Molded Block Cartridges are an enhanced version of the CFB product line, designed to combine the benefits of a sediment filter and a carbon block into a single cartridge. They are manufactured using proprietary Fibredyne technology, which involves attaching powdered activated carbon onto a cellulose-free synthetic fiber matrix.
Key features include:
- Nominal 5-10 micron rating
- Premium dirt-holding capacity
- Premium chlorine taste & odor and bad taste and odor reduction
The Fibredyne carbon block technology offers up to two times the chlorine taste & odor reduction and dirt-holding capacity compared to traditional blocks. This technology also includes a unique post-filtration layer fused to the carbon/fiber media blend, preventing the release of fines into the effluent stream.
CFB-Plus Series cartridges are manufactured entirely from FDA-compliant materials, suitable for residential, food service, commercial, and industrial applications.
Materials of Construction:
- Filter Media: Bonded PAC
- End Caps: Polypropylene
- Netting: Polyethylene
- Gaskets: Santoprene™
Operating Limits
- Temperature rating: 40°F-180°F (4.4°C-82.2°C)
Product Water
These cartridges provide:
- Nominal micron rating: 5-10
- Chlorine taste & Odor reduction capacity:
- CFB-Plus10: >10,000 gallons @ 1 gpm (>37,800 L @ 3.8 Lpm)
- CFB-Plus20: >20,000 gallons @ 2 gpm (>75,700 L @ 7.6 Lpm)
- CFB-Plus30: >30,000 gallons @ 3 gpm (>113,500 L @ 11.4 Lpm)
- CFB-Plus10BB: >25,000 gallons @ 2 gpm (>94,600 L @ 7.6 Lpm)
- CFB-Plus20BB: >50,000 gallons @ 4 gpm (>189,000 L @ 15.1 Lpm)
Mechanical / Hydraulic
The cartridge specifications and performance data are as follows:
| Model | Maximum Dimensions | Initial ∆P @ Flow Rate |
|---|---|---|
| CFB-Plus10 | 2⅞" x 9¾" (73mm x 248mm) | 1.6 psi @ 1 gpm (0.7 bar @ 3.8 Lpm) |
| CFB-Plus20 | 2⅞" x 20" (73mm x 508mm) | 1.6 psi @ 2 gpm (0.7 bar @ 7.6 Lpm) |
| CFB-Plus30 | 2⅞" x 30" (73mm x 762mm) | 1.6 psi @ 3 gpm (0.7 bar @ 11.4 Lpm) |
| CFB-Plus10BB | 4⅝" x 9¾" (118mm x 248mm) | 2.5 psi @ 2 gpm (0.2 bar @ 7.6 Lpm) |
| CFB-Plus20BB | 4⅝" x 20" (118mm x 508mm) | 2.5 psi @ 4 gpm (0.2 bar @ 11.4 Lpm) |
Note: Cartridges may contain a small amount of carbon fines. After installation, flush new cartridges with sufficient water to remove all traces of fines prior to use.
Warning: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Certification: Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Disclaimer: This summary is based on the provided text extract. The original PDF may contain additional figures, footnotes, or revisions not captured here. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.