Datasheet summary
EP Carbon Briquette Cartridges
Engineering summary from PDF text extraction for EP Carbon Briquette Cartridges. Verify every value with the OEM datasheet.
Summary
Product Identification
The EP Series Carbon-Briquette Cartridges are designed for high dirt-holding capacity and effective reduction of bad taste & odor, as well as chlorine taste & odor. They are manufactured using a patented process that results in a high porosity design, aiming to prevent premature plugging and maximize carbon utilization while maintaining a low pressure drop. The cartridges are protected by Endurawrap®, a uniquely formulated wrap that extends cartridge life by trapping sediment.
These cartridges are made entirely from FDA-compliant materials.
Performance Data
- Nominal 5-micron rating (based on manufacturer’s internal testing)
- High dirt-holding capacity maximizes utilization of the carbon block.
- Highly effective bad taste & odor and chlorine taste & odor reduction.
Cartridge Specifications and Performance
| Model | Maximum Dimensions | Micron Rating* (nominal) | Initial ∆P (psi) @ Flow Rate (gpm) | Chlorine Taste & Odor Reduction @ Flow Rate |
|---|---|---|---|---|
| EP-10 | 2⁷⁄₈" x 9¾" (73 mm x 248 mm) | 5 | 3.4 psi @ 1 gpm (0.23 bar @ 3.8 Lpm) | >6000 gallons @ 1 gpm (22,700 L @ 3.8 Lpm) |
| EP-20 | 2⁷⁄₈" x 20" (73 mm x 508 mm) | 5 | 3.4 psi @ 2 gpm (0.23 bar @ 7.6 Lpm) | >12,000 gallons @ 2 gpm (45,400 L @ 7.6 Lpm) |
| EP-BB | 4⁵⁄₈" x 9¾" (118 mm x 248 mm) | 5 | 4.3 psi @ 2 gpm (0.30 bar @ 7.6 Lpm) | >22,000 gallons @ 2 gpm (83,300 L @ 7.6 Lpm) |
| EP20-BB | 4⁵⁄₈" x 20" (118 mm x 508 mm) | 5 | 5.5 psi @ 5 gpm (0.38 bar @ 19 Lpm) | >40,000 gallons @ 4 gpm (151,400 L @ 15.1 Lpm) |
*Based on manufacturer's internal testing.
Note: Micron ratings are based on 85% or greater removal of given particle size. Data obtained from actual particle counts using AC Fine Test Dust and Latex spheres. Note: Estimated capacity using 2 ppm free available chlorine (FAC) at continuous flow with greater than 90% reduction.
Approximate Net Pressure Drop See the official PDF for exact tabulated values, as this section is represented graphically.
Materials of Construction
- Filter Media: Bonded PAC
- End Caps: Polypropylene
- Inner/Outer Wraps: Polyolefin
- Netting: Polyethylene
- Gaskets: Buna-N
Operating Limits
- Temperature Rating: 40–180ºF (4.4–82.2ºC)
Warning: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Note: The EP cartridges will contain a very small amount of carbon fines (very fine black powder) and a new cartridge after installation should be flushed with sufficient water to remove the fines from your water system before using the water.
Certifications
The EP-10, EP-20, EP-BB, and EP-20BB models are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Disclaimer
This summary is based on extracted text and may miss figures, footnotes, or the most recent revisions. For contractual data, please refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.