Datasheet summary
EPM Carbon Briquette Cartridges
Engineering summary from PDF text extraction for EPM Carbon Briquette Cartridges. Verify every value with the OEM datasheet.
Summary
Product identification
The EPM Series Modified Epsilon Carbon-Briquette Cartridges are designed for taste, odor, and chlorine taste & odor reduction. They feature a patented high-porosity design that helps prevent premature plugging, maximizing carbon utilization while maintaining low pressure drop. The cartridges are protected by Endurawrap®, a unique formulation that traps sediment to extend cartridge life.
Key features:
- Nominal 10-micron rating
- Enhanced dirt holding capacity for extended cartridge life
- Bad taste & odor and chlorine taste & odor reduction
- Lowest pressure drop
- Economically priced
EPM Series cartridges are manufactured entirely from FDA-compliant materials, making them suitable for a wide range of residential, food service, commercial, and industrial applications.
The cartridges are protected by U.S. Patent No. 5,976,432 & 5,823,668. They are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Operating limits
- Temperature Rating: 40–180ºF (4.4–82.2ºC)
Mechanical / hydraulic
EPM Series Modified Epsilon Carbon-Briquette Cartridges specifications:
| Model | Maximum Dimensions | Micron Rating (nominal)* | Initial ∆p @ Flow Rate |
|---|---|---|---|
| EPM-10 | 2⅞" x 9¾" (73 mm x 248 mm) | 10 | 1.5 psi @ 1 gpm (0.10 bar @ 3.8 Lpm) |
| EPM-20 | 2⅞" x 20" (73 mm x 508 mm) | 10 | 1.0 psi @ 2 gpm (0.07 bar @ 7.6 Lpm) |
| EPM-BB | 4⅝" x 9¾" (118 mm x 248 mm) | 10 | 5.0 psi @ 2 gpm (0.35 bar @ 7.6 Lpm) |
| EPM-20BB | 4⅝" x 20" (118 mm x 508 mm) | 10 | 4.0 psi @ 4 gpm (0.28 bar @ 15.1 Lpm) |
* Micron ratings based on 85% or greater removal of given particle size. Data obtained from actual particle counts, using AC Fine Test Dust at 1 gpm.
Materials of Construction:
- Filter Media: Bonded PAC
- End Caps: Polypropylene
- Outer Wrap: Polyolefin
- Netting: Polyethylene
- Gaskets: Buna-N
Product water
Chlorine taste & odor reduction performance:
| Model | Chlorine Taste & Odor Reduction @ Flow Rate |
|---|---|
| EPM-10 | >3,000 gallons @ 1 gpm (11,400L @ 3.8 Lpm) |
| EPM-20 | >6,000 gallons @ 2 gpm (22,700L @ 7.6 Lpm) |
| EPM-BB | >15,000 gallons @ 2 gpm (56,750L @ 7.6 Lpm) |
| EPM-20BB | >30,000 gallons @ 4 gpm (113,500L @ 15.1 Lpm) |
Estimated capacity using 2.0 ppm free available chlorine (FAC) at 0.5 ppm breakthrough. Performance capacity depends on system design, flow rate, and other application conditions.
Note on Carbon Fines: EPM-Series cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, follow instructions for flushing the cartridge to remove fines before using the water. It is recommended to run (flush) the tap for at least 20 seconds prior to using water for drinking or cooking, especially if the tap has not been used daily.
Warning: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.