Datasheet summary
ST Series Stainless Steel Housings
Engineering summary from PDF text extraction for ST Series Stainless Steel Housings. Verify every value with the OEM datasheet.
Summary
Product identification
The ST Series Stainless Steel Filter Housings are heavy-duty units designed for smaller filtration systems and point-of-use applications. They feature a brushed 304 stainless steel sump and a cast brass/nickel-plated head. These housings are ideal for high-pressure and hot water applications not suitable for plastic housings. They accept a complete range of standard double open end (DOE) cartridges.
Operating limits
- Maximum Temperature: 300ºF (149ºC)
- Maximum Pressure: 250 psi (17.2 bar)
- Flow Rate:
- ST-1: 10 gpm (38 Lpm)
- ST-2: 15 gpm (57 Lpm)
- ST-3: 20 gpm (76 Lpm)
Mechanical / hydraulic
- Materials of Construction:
- Housing: Brushed 304 Stainless Steel
- Head: Brass/Nickel Plated
- Sealing Gaskets: Buna-N, Cellulose Fiber
- Pipe Size: 3/4" NPT
- Maximum cartridge diameter: 3" (76 mm)
- Drainage: Sumps are available with either a pipe plug or pet-cock in the bottom for draining.
- Dimensions (Maximum):
- ST-1: 12⅞" x 4⅛" (327 mm x 105 mm)
- ST-2: 22¾" x 4⅛" (578 mm x 105 mm)
- ST-3: 32⅜" x 4⅛" (822 mm x 105 mm)
Cartridge Compatibility
These housings accept complete range of standard double open end (DOE) cartridges. Will not accept: GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series Cartridges.
Warnings and Cautions
- Drinking Water: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Freezing: Protect against freezing to prevent cracking of the filter and water leakage.
- Water Quality: Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the limited warranty. Consult factory for product modifications for these conditions.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the official OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.