Tradional In-Line Cartridges

Summary

Product identification

The IC-101L and TS-101L are Traditional In-Line Filter Series cartridges, injection molded and pressure rated to 125 psi. They are designed for applications such as post-RO, under-sink, ice-maker, and food service. All in-line filters include a pre- and post-filter.

• IC-101L: Features coconut shell, granular activated carbon (GAC) for reduction of unwanted taste, odor, and chlorine taste & odor.
• TS-101L: Contains a combination of GAC and polyphosphate crystals to inhibit lime/scale build-up.

Operating limits

• Maximum Temperature: 100ºF (37.8ºC)
• Operating Pressure: 125 psi (8.62 bar)

Mechanical / hydraulic

• Maximum dimensions: 2" x 10½" (51 mm x 270 mm) for both models.
• Connections: Standard 1/4" NPT
• Materials of Construction:
  • Body: Polypropylene
  • Cap: Polypropylene
  • Pre-Filter and Post-Filter: Polypropylene
  • Carbon: Coconut Shell GAC
• Estimated life and Flow rate:
  • IC-101L: 2500 gallons (9460L) at 0.75 gpm (2.8 Lpm)
  • TS-101L: 1700 gallons (6450L) at 0.75 gpm (2.8 Lpm)
• Media Volume:
  • IC-101L: Coconut Shell GAC (17 cu. in.)
  • TS-101L: Phosphate/GAC (16 cu. in.)
• Pressure Drop: Pressure drop varies with flow rate. See the official PDF for exact tabulated values.

Feed water

These filters are designed to reduce bad taste & odor and chlorine taste & odor. The TS-101L also inhibits lime/scale build-up.

WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Certifications

The IC-101L and TS-101L are Tested and Certified by NSF International.

General Notes and Cautions

• New cartridges should be flushed with sufficient water after installation to remove fine powder (fines) from the water system before use.
• It is recommended to run (flush) the filtered water tap for at least 10 seconds before using for drinking or cooking, especially if not used daily.
• CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.

---

Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF datasheet. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror