Inge MB PRO L 64 H

Summary

Product identification

The DuPont™ Inge™ MB PRO L 64 H Module is an ultrafiltration module designed for integration into horizontal pressure vessels.

• Part Number / GMID: IN-0124 / 12071523 (includes EP-0115 / 12070222)
• Key Applications:
  • Municipal drinking water
  • Desalination RO pretreatment
  • Designed as a replacement option in alternative UF systems
• Key Features:
  • Innovative Multibore™ PRO PES Fibers: Exceptional physical strength and chemical resistance, High colloidal particulate, bacteria and virus log removal rate, Excellent filtration permeability. Optional coagulation can enhance the removal of algae and organics.
  • Optimized Module Design: Ideal design to integrate in horizontal pressure vessels, Enhanced active filtration area.
• Membrane Type: Multibore™ PRO
• Membrane Material: PESm
• Nominal Membrane Pore Size: 0.02 µm
• Mode of Filtration: In-Out Pressurized
• Module Operating Process: Dead-end
• Housing Material: PVC-U, white

Mechanical / hydraulic

• Dimensions:
  • Active Membrane Area: 64 m² (689 ft²)
  • Module Length: 1,537.5 mm (60.5 inch)
  • Module Diameter (D): 220 mm (8.7 inch)
  • Filtrate Collector Inner Diameter (d): 42.6 mm (1.7 inch)
  • Maximum Insertion Depth of Interconnectors: 50 mm (2.0 inch)
• Weight and Volume (Module Only):
  • Shipping Weight: 30 kg (66 lbs.)
  • Weight Empty: 30 kg (66 lbs.)
  • Weight Filled: 67 kg (147 lbs.)
  • Hold-Up Volume Feed (CIP): 12 L (3.3 gal)
  • Hold-Up Volume Membrane Structure (CIP): 12 L (3.3 gal)
  • Hold-Up Volume Filtrate (CIP): 21 L (5.6 gal)
• Horizontal Connecting Kit (DuPont™ IntegraTec™ MB PRO 64 H):
  • Kit Part Number / GMID: EP-0115 / 12070222
  • Shipping weight: 240 g (8.47 oz)
  • Spacer Ring Specifications:
    • Material: Polypropylene white
    • Diameter External (A): 233.4 mm (9.19 inch)
    • Height (B): 46.0 mm (1.81 inch)
    • Weight: 70 g (2.47 oz)
  • Kit Content:
    • Interconnector Set (EP-0106 / 12070214): 1 Piece
    • Spacer Ring (KT-0178 / 12070623): 2 Pieces
  • Note: The ISO-tolerance linear measure table is fragmented in the extract. See the official PDF for exact tabulated values.
• Standard Interconnector Set:
  • Interconnector Part Number / GMID: EP-0106 / 12070214
  • Shipping Weight: 100 g (2.81 oz)
  • Set Content: Interconnector (1 Piece), O-Rings (4 Pieces, preassembled)
  • Interconnector Specifications:
    • Material: PVC-U white
    • Total Length (L): 109 mm (4.29 inch)
    • Outer Diameter (D): 41.3 mm (1.62 inch)
    • Inner Diameter (d): 32.6 mm (1.28 inch)
    • Depth of Insertion into Module (A): 50 mm (1.97 inch)
    • Distance to Outer O-Ring (B): 8 mm (0.32 inch)
    • Width of Stopper (C): 9 mm (0.35 inch)
    • Excess Radius of Stopper (E): 4 mm (0.16 inch)
  • O-Rings Specifications:
    • Material: Peroxide - cured EPDM
    • Thickness: 4 mm (0.16 inch)
    • Inner Diameter: 35 mm (1.38 inch)
• Optional Solid Interconnector Set:
  • Interconnector Part Number / GMID: EP-1106 / 12070232
  • Shipping Weight: 210 g (7.41 oz)
  • Set Content: Interconnector (1 Piece), O-Rings (4 Pieces)
  • All other specifications are identical with the Standard Interconnector.

Operating limits

• Suggested Operating Conditions:
  • Operating Temperature Range: 1 - 45 °C (34 - 113 °F)
  • Operating pH: 2 - 12
  • Cleaning pH: 1 - 13
  • Typical Filtration TMP: 0.1 - 0.6 bar (1.5 - 8.7 psi)
  • Typical Backwash TMP: 0.3 - 2.0 bar (4.4 - 29.0 psi)
  • Backwash Flux: 230 L/(m²h) (135 gfd)
  • Backwash Flow: 14.7 m³h (64.7 gpm)
• Maximum Operating Limits:
  • Rate of Temperature Change: 5 °C/min (9 °F/min)
  • Inlet Pressure at max 40°C: Refer to the pressure vessel manufacturer.
  • Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
  • Filtration TMP: 1.5 bar (22 psi)
  • Backwash TMP: 3.0 bar (44 psi)
  • Filtration Flux: 140 L/(m²h) (82 gfd)
  • Filtration Flow: 8.9 m³h (39.2 gpm)
  • Backwash Flux: 250 L/(m²h) (147 gfd)
  • Particle Size: 230 µm
  • Exposure NaOCl: ≤ 500,000 ppm x h (at pH ≥ 9.5)
  • Concentration NaOCl: 2,000 ppm
  • Note: NaOCl exposure limits at lower pH are dependent on water type and are project specific.

General Information and Regulatory Notes:

• Avoid abrupt pressure variations (maximum 0.5 bar/s) during start-up, operation, shutdown, or cleaning to prevent possible membrane damage.
• For assembly, refer to the latest version of the DuPont™ Inge™ MB L Horizontal PES-UF Module Assembly Manual (Form No. 45-D02563-en).
• Warranty will be null and void if operating limits and guidelines are not strictly followed.
• For extended system shutdowns, a storage solution must be introduced. Refer to the DuPont™ Inge™ PES-UF Module Preservation Instruction (Form No. 45-D02946-en).
• Certified drinking water modules require specific conditioning procedures prior to producing potable water. Refer to the DuPont™ Inge™ Process Requirements for Horizontal PES-UF Modules (Form No. 45-D02233-en).
• Drinking water modules may be subjected to additional regulatory restrictions in some countries; check local regulatory guidelines and application status before use.
• Flushing needs to be done according to the DuPont™ Inge™ PES-UF Module Rinsing Procedure (Form No. 45-D02947-en).

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror