Inge MB PRO XL 82 TRS

Summary

Product Identification

• Product Name: DuPont™ Inge™ MB PRO XL 82 TRS Module
• Part Number / GMID: IN-0125 / 12102358
• Mode of Filtration: In-Out Pressurized
• Membrane Type: Multibore™ PRO
• Membrane Material: PESm
• Nominal Membrane Pore Size: 0.02 µm
• Module Operating Process: Dead-end
• Housing Material: PVC-U, white

Key Applications

• Municipal drinking water
• Desalination RO pretreatment
• Ideal for height-restricted or containerized filtration solutions

Key Features

Innovative Multibore™ PRO PES Fibers:

• Exceptional physical strength and chemical resistance.
• High colloidal particulate, bacteria, and virus log removal rate.
• Excellent filtration permeability.
• Optional coagulation can enhance the removal of algae and organics.

Optimized Module Design:

• Innovative end-cap design to suit T-Rack™ S concept with simple assembly and scalability.
• Enhanced active filtration area to minimize footprint.
• Robust materials for long lifetime.
• Easy installation and low maintenance.
• All wetted parts corrosion-free.

Mechanical / Hydraulic

• Active Membrane Area: 82 m² (883 ft²)
• Module Length Including T-Piece (L): 1,879 mm (74.0 inch)
• Module Diameter (D): 250 mm (9.8 inch)
• Shipping Weight: 47 kg (103 lbs.)
• Weight Empty (Module and Corresponding Frame): 59 kg (131 lbs.)
• Weight Filled (Module and Corresponding Frame): 123 kg (271 lbs.)
• Hold-Up Volume Feed (CIP): 29 L (7.8 gal)
• Hold-Up Volume Membrane Structure (CIP): 16 L (4.2 gal)
• Hold-Up Volume Filtrate (CIP): 32 L (8.3 gal)

Operating Limits

• Operating Temperature Range: 1 - 45 °C (34 - 113 °F)
• Operating pH: 2 - 12
• Cleaning pH: 1 - 13
• Typical Filtration TMP: 0.1 - 0.6 bar (1.5 - 8.7 psi)
• Typical Backwash TMP: 0.3 - 2.0 bar (4.4 - 29.0 psi)
• Backwash Flux: 230 L/(m²h) (135 gfd)
• Backwash Flow: 18.9 m³/h (83 gpm)
• Maximum Rate of Temperature Change: 5 °C/min (9 °F/min)
• Maximum Inlet Pressure (at max 40°C): 5 bar (73 psi)
• Maximum Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
• Maximum Filtration TMP: 1.5 bar (22 psi)
• Maximum Backwash TMP: 3.0 bar (44 psi)
• Maximum Filtration Flux: 140 L/(m²h) (82 gfd)
• Maximum Filtration Flow: 11.5 m³/h (51 gpm)
• Maximum Backwash Flux: 250 L/(m²h) (147 gfd)
• Maximum Particle Size: 230 µm
• Maximum Exposure NaOCl: ≤ 500,000 ppm x h (at pH ≥ 9.5)
• Maximum Concentration NaOCl: 2,000 ppm

Suggested Operating Conditions (T-Rack™ Configuration)

The datasheet provides detailed tables for T-Rack™ configurations, including 2-row and 4-row setups, specifying the number of modules, T-Rack™ unit part numbers, lengths, and total membrane areas. See the official PDF for exact tabulated values.

Important Notes

• Avoid any abrupt pressure variations during start-up, operation, shutdown, cleaning, or other sequences to prevent possible membrane damage. The maximum pressure change allowable is 0.5 bar/s.
• For assembly, refer to the latest version of the DuPont™ Inge™ TR Rack Assembly Manual (Form No. 45-D02230-en).
• If operating limits and guidelines given in this bulletin are not strictly followed, any warranty will be null and void.
• To control biological growth during extended system shutdowns, a storage solution must be introduced into the membrane modules. For detailed information, see the DuPont™ Inge™ PES-UF Module Preservation Instruction (Form No. 45-D02946-en).
• Certified drinking water modules require specific conditioning procedures prior to producing potable water. For operating parameters, refer to the DuPont™ Inge™ Process and Design Guidelines (Form No. 45-D02234-en).
• Drinking water modules may be subjected to additional regulatory restrictions in some countries. Please check local regulatory guidelines and application status before use.
• Flushing needs to be done according to the DuPont™ Inge™ PES-UF Module Rinsing Procedure (Form No. 45-D02947-en).

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror