Inge MB PRO XL 95 OP

Summary

Product identification

• DuPont™ Inge™ MB PRO XL 95 OP Module
• Module for Open Platform
• Part Number / GMID: IN-0122 / 12071522
• Mode of Filtration: In-Out Pressurized
• Membrane Type: Multibore™ PRO
• Membrane Material: PESm
• Nominal Membrane Pore Size: 0.02 µm
• Module Operating Process: Dead-end
• Housing Material: PVC-U, white
• End Cap Material: PVC-U, grey
• End Cap Coupling Material: SS (EPDM sealing)

Key Applications

• Municipal drinking water
• Desalination RO pretreatment
• Ideal for large systems

Key Features

• Innovative Multibore™ PRO PES Fibers:
  • Exceptional physical strength and chemical resistance.
  • High colloidal particulate, bacteria and virus log removal rate.
  • Excellent filtration permeability.
  • Optional coagulation can enhance the removal of algae and organics.
• Optimized Module Design:
  • Open platform design to fit customer built skids.
  • Enhanced active filtration area to minimize footprint.
  • Robust materials for long lifetime.
  • Easy installation and low maintenance.
  • All wetted parts corrosion free.

Mechanical / Hydraulic

• Active Membrane Area: 95 m² (1,023 ft²)
• Module Length (L): 1,720 ± 1.5 mm (67.7 inch)
• Distance Top / Bottom Feed Port (L1): 1,834 ± 3.0 mm (72.2 inch)
• Length with End Caps (L2): 1,914 ± 3.0 mm (75.4 inch)
• Module Diameter (A): 250 ± 1.5 mm (9.8 inch)
• Distance Feed Top Port - Filtrate Port (B): 190 ± 1.5 (7.5 inch)
• Outer Diameter End Cap Coupling Maximum (C): 295 mm (11.6 inch)
• Protruding Part of the Port (E): 40 ± 1 mm (1.6 inch)
• Filtrate / Backwash Port (D): 50.8 mm (2 inch)
• Shipping Weight: 55 kg (121 lbs.)
• Weight Empty: 55 kg (121 lbs.)
• Weight Filled: 109 kg (240 lbs.)
• Hold-Up Volume Feed (CIP): 22 L (5.7 gal)
• Hold-Up Volume Membrane Structure (CIP): 18 L (4.8 gal)
• Hold-Up Volume Filtrate (CIP): 28 L (7.4 gal)

Operating limits

• Operating Temperature Range: 1 - 45 °C (34 - 113 °F)
• Operating pH: 2 - 12
• Cleaning pH: 1 - 13
• Typical Filtration TMP: 0.1 - 0.6 bar (1.5 - 8.7 psi)
• Typical Backwash TMP: 0.3 - 2.0 bar (4.4 - 29.0 psi)
• Backwash Flux: 230 L/(m²h) (135 gfd)
• Backwash Flow: 21.8 m³/h (96.0 gpm)
• Rate of Temperature Change: 5 °C/min (9 °F/min)
• Inlet Pressure at max 40°C: 5 bar (73 psi)
• Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
• Filtration TMP: 1.5 bar (22 psi)
• Backwash TMP: 3.0 bar (44 psi)
• Filtration Flux: 140 L/(m²h) (82 gfd)
• Filtration Flow: 13.3 m³/h (58.6 gpm)
• Backwash Flux: 250 L/(m²h) (147 gfd)
• Particle Size: 230 µm
• Exposure NaOCl: ≤ 500,000 ppm x h (at pH ≥ 9.5)
• Concentration NaOCl: 2,000 ppm

Important Notes

• Avoid any abrupt pressure variations during start-up, operation, shutdown, cleaning or other sequences to prevent possible membrane damage.
• For assembly, preservation, and rinsing procedures, refer to the latest versions of the specific DuPont™ Inge™ manuals.
• Certified drinking water modules require specific conditioning procedures and may be subject to additional regulatory restrictions in some countries.

Disclaimer

This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions from the official OEM PDF. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror