MB Pro 64 H

Summary

Product identification

The DuPont™ IntegraTec™ MB PRO 64 H is an I series Integrated PES UF Module designed for installation in horizontal pressure vessels.

• Part Number: IN-0124 (includes EP-0115)
• Mode of Filtration: In-Out Pressurized
• Membrane Type: Multibore™ PRO
• Membrane Material: PESm
• Nominal Membrane Pore Size: 0.02 µm
• Module Operating Process: Dead-end
• Housing Material: PVC-U, white

Key Applications:

• Municipal drinking water
• Desalination RO pretreatment
• Ideal to replace horizontal filtration systems

Key Features:

• Innovative Multibore™ PRO PES Fibers:
  • Exceptional physical strength and chemical resistance.
  • High colloidal particulate, bacteria and virus log removal rate.
  • Excellent filtration permeability.
  • Optional coagulation can enhance the removal of algae and organics.
• Optimized Module Design:
  • Ideal design to integrate in horizontal pressure vessels.
  • Enhanced active filtration area.

Mechanical / hydraulic

• Active Membrane Area: 64 m² (689 ft²)
• Module Length: 1,537.5 mm (60.5 inch)
• Module Diameter (D): 220 mm (8.7 inch)
• Filtrate Collector Inner Diameter (d): 42.6 mm (1.7 inch)
• Maximum Insertion Depth of Interconnectors: 50 mm (2.0 inch)
• Shipping Weight (Module Only): 32 kg (71 lbs.)
• Weight Empty: 32 kg (71 lbs.)
• Weight Filled: 72 kg (159 lbs.)
• Hold-Up Volume Feed (CIP): 12 L (3.2 gal)
• Hold-Up Volume Membrane Structure (CIP): 12 L (3.2 gal)
• Hold-Up Volume Filtrate (CIP): 18 L (4.8 gal)

Horizontal Connecting Kit (Part Number EP-0115):

• Shipping weight: 240 g (8.47 oz)
• Kit Content:
  • Interconnector Set (EP-0106): 1 piece
  • Spacer Ring (KT-0178): 2 pieces

Spacer Ring Specifications (KT-0178):

• Material: Polypropylene white
• Diameter External (A): 233.4 mm (9.19 inch)
• Height (B): 46.0 mm (1.81 inch)
• Weight: 70 g (2.47 oz)

Standard Interconnector Set (Part Number EP-0106):

• Shipping Weight: 100 g (2.81 oz)
• Set Content: Interconnector (1 piece), O-Rings (4 pieces, preassembled)
• Interconnector Material: PVC-U white
• Interconnector Total Length (L): 109 mm (4.29 inch)
• Interconnector Outer Diameter (D): 41.3 mm (1.62 inch)
• Interconnector Inner Diameter (d): 32.6 mm (1.28 inch)
• Depth of Insertion into Module (A): 50 mm (1.97 inch)
• Distance to Outer O-Ring (B): 8 mm (0.32 inch)
• Width of Stopper (C): 9 mm (0.35 inch)
• Excess Radius of Stopper (E): 4 mm (0.16 inch)
• O-Rings Material: Peroxide - cured EPDM
• O-Rings Thickness: 4 mm (0.16 inch)
• O-Rings Inner Diameter: 35 mm (1.38 inch)

Optional Solid Interconnector Set (Part Number EP-0106):

• Shipping Weight: 210 g (7.41 oz)
• Set Content: Interconnector (1 piece), O-Rings (4 pieces)
• All other specifications are identical with the Standard Interconnector.

Operating limits

Suggested Operating Conditions:

• Operating Temperature Range: 1 - 40 °C (34 - 104 °F)
• Operating pH: 3 - 11
• Cleaning pH: 1 - 13
• Typical Filtration TMP: 0.1 - 0.6 bar (1.5 - 8.7 psi)
• Typical Backwash TMP: 0.3 - 2.0 bar (4.4 - 29.0 psi)
• Backwash Flux: 230 L/(m²h) (135 gfd)
• Backwash Flow: 14.7 m³h (64.7 gpm)

Operating Limits (Maximum):

• Rate of Temperature Change: 5 °C/min (9 °F/min)
• Inlet Pressure (20 - 40 °C): Please refer to the pressure vessel manufacturer.
• Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
• Filtration TMP: 1.5 bar (22 psi)
• Backwash TMP: 3.0 bar (44 psi)
• Filtration Flux: 140 L/(m²h) (82 gfd)
• Filtration Flow: 8.9 m³h (39.2 gpm)
• Backwash Flux: 250 L/(m²h) (147 gfd)
• Particle Size: 230 µm
• Exposure NaOCl: ≤ 250,000 ppm x h (at pH ≥ 9.5)
• Concentration NaOCl: 500 ppm

Important Notes

• Avoid any abrupt pressure variations during start-up, operation, shutdown, cleaning, or other sequences to prevent possible membrane damage. The maximum allowable pressure change is 0.5 bar/s.
• If operating limits and guidelines are not strictly followed, any warranty will be null and void.
• For assembly, refer to the DuPont™ IntegraTec™ Pressurized UF In-Out I Series Assembly Manual (Form No. 45-D02563-en).
• For extended system shutdowns, a storage solution must be introduced into the membrane modules to control biological growth. Detailed information is in the DuPont™ IntegraTec™ Pressurized UF Out-In Module Preservation Instruction Manual (Form No. 45-D02946-en).
• Certified drinking water modules require specific conditioning procedures prior to producing potable water. Refer to the DuPont™ IntegraTec™ Pressurized UF In-Out I Series Process Requirements for Horizontal Modules (Form No. 45-D02233-en).
• Drinking water modules may be subject to additional regulatory restrictions in some countries. Check local regulatory guidelines and application status before use.
• Flushing must be done according to the DuPont™ IntegraTec™ Pressurized UF Out-In Module Rinsing Procedure (Form No. 45-D02947-en).

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data must always match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror