MB 60 TR

Summary

Product Identification

• Product Line: DuPont™ IntegraTec™ P series Pressurized PES UF Module
• Module Name: DuPont™ IntegraTec™ MB 60 TR S (Modules for T-Rack™ S, previously dizzer XL 0.9 MB 60 ST)
• Part Number / GMID: IN-5102 / 12071528
• Mode of Filtration: In-Out Pressurized
• Membrane Type: Multibore™
• Membrane Material: PESm
• Nominal Membrane Pore Size: 0.02 µm
• Module Operating Process: Dead-end
• Housing Material: PVC-U, white

Key Applications

• Municipal drinking water
• Desalination RO pretreatment
• Industrial utility water
• Industrial wastewater reuse
• Ideal for height restricted or containerized filtration solutions

Key Features

• Proven Multibore™ PES Fibers:
  • Exceptional physical strength and chemical resistance.
  • High colloidal particulate, bacteria and virus log removal rate.
  • Unique design for high solids loads.
  • Optional coagulation can enhance the removal of algae and organics.
• Optimized Module Design:
  • Innovative end-cap design to suit T-Rack™ S concept with simple assembly and scalability.
  • Robust materials for long lifetime.
  • Easy installation and low maintenance.
  • All wetted parts corrosion free.

Mechanical / Hydraulic

• Active Membrane Area: 60 m² (646 ft²)
• Module Length Including T-Piece (L): 1,879 mm (74.0 inch)
• Module Diameter (D): 250 mm (9.8 inch)
• Shipping Weight (Module Only): 47 kg (103 lbs.)
• Weight Empty (Module and Corresponding Frame): 59 kg (131 lbs.)
• Weight Filled (Module and Corresponding Frame): 123 kg (270 lbs.)
• Hold-Up Volume Feed (CIP): 29 L (7.6 gal)
• Hold-Up Volume Membrane Structure (CIP): 16 L (4.1 gal)
• Hold-Up Volume Filtrate (CIP): 32 L (8.6 gal)

Operating Limits

• Operating Temperature Range: 1 - 45 °C (34 - 113 °F)
• Operating pH: 2 - 12
• Cleaning pH: 1 - 13
• Typical Filtration TMP: 0.1 - 0.6 bar (1.5 - 8.7 psi)
• Typical Backwash TMP: 0.3 - 2.0 bar (4.4 - 29.0 psi)
• Backwash Flux: 230 L/(m²h) (135 gfd)
• Backwash Flow: 13.8 m³/h (60.8 gpm)
• Maximum Rate of Temperature Change: 5 °C/min (9 °F/min)
• Maximum Inlet Pressure (at max 40°C): 5 bar (73 psi)
• Maximum Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
• Maximum Filtration TMP: 1.5 bar (22 psi)
• Maximum Backwash TMP: 3.0 bar (44 psi)
• Maximum Filtration Flux: 180 L/(m²h) (106 gfd)
• Maximum Filtration Flow: 10.8 m³/h (47.6 gpm)
• Maximum Backwash Flux: 300 L/(m²h) (176 gfd)
• Maximum Particle Size: 300 µm
• Maximum Exposure NaOCl: ≤ 500,000 ppm x h (at pH ≥ 9.5)
• Maximum Concentration NaOCl: 2,000 ppm

System Configurations

The datasheet provides detailed tables for T-Rack™ S configurations, including 2-row and 4-row setups. These tables specify the number of modules, T-Rack™ unit part numbers, overall length, and total membrane area for various system sizes. See the official PDF for exact tabulated values.

Important Notes

• Avoid any abrupt pressure variations during start-up, operation, shutdown, cleaning or other sequences to prevent possible membrane damage. The maximum pressure change allowable is 0.5 bar/s.
• For assembly, refer to the latest version of the DuPont™ IntegraTec™ Pressurized UF In-Out P Series Assembly Instructions for T-Rack™ Manual (Form No. 45-D02230-en).
• If operating limits and guidelines given in this bulletin are not strictly followed, any warranty will be null and void.
• To control biological growth during extended system shutdowns, a storage solution must be introduced into the membrane modules. For detailed information, see the DuPont™ IntegraTec™ Pressurized UF Out-In Module Preservation Instruction Manual (Form No. 45-D02946-en).
• Certified drinking water modules require specific conditioning procedures prior to producing potable water. For operating parameters, refer to the DuPont™ IntegraTec™ Pressurized UF In-Out P Series Process and Design Guidelines (Form No. 45-D02234-en).
• Drinking water modules may be subjected to additional regulatory restrictions in some countries. Check local regulatory guidelines and application status before use.
• Flushing needs to be done according to the DuPont™ IntegraTec™ Pressurized UF Out-In Module Rinsing Procedure (Form No. 45-D02947-en).

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the complete context of the original OEM PDF datasheet (Form No. 45-D02242-en, Rev. 3, December 2025). For contractual data and full product specifications, the official OEM PDF revision used on the project must be consulted.

Official datasheet (PDF)

Lenntech datasheet mirror