MB Pro 95

Summary

Product identification

• Product Name: DuPont™ IntegraTec™ MB PRO 95
• Part Number: IN-0122
• Module Series: P series | Pressurized PES UF Module
• Form Number: 45-D04342-en, Rev. 1, July 2023
• Mode of Filtration: In-Out Pressurized
• Membrane Type: Multibore™ PRO
• Membrane Material: PESm
• Nominal Membrane Pore Size: 0.02 µm
• Module Operating Process: Dead-end
• Housing Material: PVC-U, white
• End Cap Material: PVC-U, grey
• End Cap Coupling Material: SS (EPDM sealing)

Key Applications

• Municipal drinking water
• Desalination RO pretreatment
• Ideal for large systems

Key Features

Innovative Multibore™ PRO PES Fibers:

• Exceptional physical strength and chemical resistance.
• High colloidal particulate, bacteria and virus log removal rate.
• Excellent filtration permeability.
• Optional coagulation can enhance the removal of algae and organics.

Optimized Module Design:

• Open platform design to fit customer built skids.
• Enhanced active filtration area to minimize footprint.
• Robust materials for long lifetime.
• Easy installation and low maintenance.
• All wetted parts corrosion free.

Mechanical / hydraulic

• Active Membrane Area: 95 m² (1,023 ft²)
• Module Length (L): 1,720 ± 1.5 mm (67.7 inch)
• Distance Top / Bottom Feed Port (L1): 1,834 ± 3.0 mm (72.2 inch)
• Length with End Caps (L2): 1,914 ± 3.0 mm (75.4 inch)
• Module Diameter (A): 250 ± 1.5 mm (9.8 inch)
• Distance Feed Top Port - Filtrate Port (B): 190 ± 1.5 (7.5 inch)
• Outer Diameter End Cap Coupling Maximum (C): 295 mm (11.6 inch)
• Protruding Part of the Port (E): 40 ± 1 mm (1.6 inch)
• Filtrate / Backwash Port (D): 50.8 mm (2 inch)
• Shipping Weight: 58 kg (128 lbs.)
• Weight Empty: 58 kg (128 lbs.)
• Weight Filled: 110 kg (243 lbs.)
• Hold-Up Volume Feed (CIP): 22 L (5.7 gal)
• Hold-Up Volume Membrane Structure (CIP): 18 L (4.8 gal)
• Hold-Up Volume Filtrate (CIP): 21 L (5.4 gal)

Operating limits

Suggested Operating Conditions:

• Operating Temperature Range: 1 - 40 °C (34 - 104 °F)
• Operating pH: 3 - 11
• Cleaning pH: 1 - 13
• Typical Filtration TMP: 0.1 - 0.6 bar (1.5 - 8.7 psi)
• Typical Backwash TMP: 0.3 - 2.0 bar (4.4 - 29.0 psi)
• Backwash Flux: 230 L/(m²h) (135 gfd)
• Backwash Flow: 21.8 m³/h (96.0 gpm)

Operating Limits (Maximum):

• Rate of Temperature Change: 5 °C/min (9 °F/min)
• Inlet Pressure (20 - 40 °C): 5 bar (73 psi)
• Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
• Filtration TMP: 1.5 bar (22 psi)
• Backwash TMP: 3.0 bar (44 psi)
• Filtration Flux: 140 L/(m²h) (82 gfd)
• Filtration Flow: 13.3 m³/h (58.6 gpm)
• Backwash Flux: 250 L/(m²h) (147 gfd)
• Particle Size: 230 µm
• Exposure NaOCl: ≤ 250,000 ppm x h (at pH ≥ 9.5)
• Concentration NaOCl: 500 ppm

Important Notes

• Avoid any abrupt pressure variations during start-up, operation, shutdown, cleaning or other sequences to prevent possible membrane damage. The maximum pressure change allowable is 0.5 bar/s.
• If operating limits and guidelines given in this bulletin are not strictly followed, any warranty will be null and void.
• To control biological growth during extended system shutdowns, a storage solution must be introduced into the membrane modules.
• Certified drinking water modules require specific conditioning procedures prior to producing potable water.
• Drinking water modules may be subjected to additional regulatory restrictions in some countries. Please check local regulatory guidelines and application status before use.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror