XP 51 IP

Summary

Product identification

The DuPont™ IntegraTec™ XP 51 IP is a P series Pressurized PVDF UF Module, previously known as DuPont™ IntegraPac™ IPD-51XP. It is designed for rack solutions.

Key Features:

• Proven XP™ Hydrophilic PVDF Fiber:
  • Superior fouling and chlorine resistance.
  • High colloidal particulate, bacteria, and virus log removal rate.
  • Excellent filtration permeability.
  • Easy cleaning and wettability.
• Optimized Module Design:
  • Innovative end cap to direct coupling of modules in IP skids with simple assembly and scalability.
  • Short module design to suit height restricted or containerized installation.
  • High operation recovery with high air scouring tolerance.
  • Reduced chemical consumption with maintenance cleanings protocol.
  • Robust materials for long lifetime.
  • Easy installation and low maintenance.

Key Applications: High recovery, height restricted, or containerized filtration in:

• Municipal drinking water.
• Industrial utility water.
• Industrial wastewater reuse.
• Municipal wastewater filtration.
• RO pretreatment.

Part Number / GMID: 12091627

Mechanical / hydraulic

General Module Specification:

• Mode of Filtration: Out-In Pressurized
• Membrane Type: Hollow fiber
• Membrane Material: PVDF (Polyvinylidene Fluoride)
• Membrane Pore Size: 0.03 μm
• Module Operating Process: Dead-end
• Other Wetted Module Components: Polyurethane, uPVC, EPDM, and ABS

Dimensions:

• Active Membrane Area: 51 m² (549 ft²)
• Module Length Overall (L): 1,988 ± 3.0 mm (78.3 ± 0.1 inch)
• Module Length (L3): 1,864 ± 3.0 mm (73.4 ± 0.1 inch)
• Module Length (L2): 1,689 ± 3.0 mm (66.5 ± 0.1 inch)
• Module Length (L1): 1,500 ± 3.0 mm (59.1 ± 0.1 inch)
• Module Diameter (D): 225 mm (8.9 inch)
• Module Width (W1): 360 mm (14.2 inch)
• Module Width (W2): 342 mm (13.5 inch)

Weight and Volume:

• Shipping Weight: 69 kg (152 lbs.)
• Weight Empty: 53 kg (117 lbs.)
• Weight Filled: 102 kg (225 lbs.)
• Hold-Up Volume Feed (Clean-In-Place = CIP): 32 L (8.5 gal)
• Hold-Up Volume Membrane Structure (CIP): 9 L (2.4 gal)
• Hold-Up Volume Filtrate (CIP): 9 L (2.4 gal)

Operating limits

Suggested Operating Conditions:

• Operating Temperature Range: 1 - 40 °C (34 - 104 °F)
• Operating pH: 2 - 11
• Cleaning pH: 2 - 12
• Typical Filtration Trans-Membrane Pressure (TMP): 0.4 - 1.5 bar (5.8 - 21.8 psi)
• Typical Backwash TMP: 0.6 - 2.0 bar (8.7 - 29.0 psi)
• Backwash Type: Air scour with liquid backwash
• Backwash Flux: 100 L/(m²h) (58.8 gfd)
• Backwash Flow: 5.1 m³h (22.4 gpm)

Maximum Operating Limits:

• Rate of Pressure Change: 0.5 bar/sec (7.3 psi/sec)
• Inlet Pressure: 6.25 bar (at 20 °C) (90.7 psi)
• Filtration TMP: 2.1 bar (30.5 psi)
• Backwash TMP: 2.5 bar (36 psi)
• Filtration Flux: 110 L/(m²h) (64.5 gfd)
• Filtration Flow: 5.6 m³h (24.8 gpm)
• Backwash Flux: 120 L/(m²h) (70.6 gfd)
• Particle Size: 300 μm
• Exposure NaOCl: ≤1,500,000 ppm x h
• Recommended max. instantaneous exposure NaOCl: 2,000 ppm

General Information:

• Avoid any abrupt pressure variations during start-up, operation, shutdown, cleaning or other sequences to prevent possible membrane damage. The maximum pressure change allowable is 0.5 bar/s.
• For assembly, refer to the latest version of the DuPont™ IntegraTec™ PVDF-UF Out-In P Series IntegraPac™ Rack Assembly Manual (Form No. 45-D01776-en).
• To control biological growth during extended system shutdowns, storage solution must be introduced into the membrane modules.

Regulatory Note:

• Certified drinking water modules require specific conditioning procedures prior to producing potable water. Refer to the DuPont™ IntegraTec™ P Series PVDF-UF Out-In Process and Design Manual (Form No. 45-D00874-en) for operating parameters.
• Drinking water modules may be subjected to additional regulatory restrictions in some countries. Check local regulatory guidelines and application status before use.
• Flushing needs to be done according to the DuPont™ IntegraTec™ PVDF-UF Out-In P Series IntegraPac™ Rack Assembly Manual (Form No. 45-D01776-en).

Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or revisions present in the full OEM PDF. Contractual data for any project must match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror