IMT 350 UF-MB-TAP

Summary

Product identification

This document describes the 350 UF/MB/TAP Ultrafiltration element. Revision date: February 2011.

Mechanical / hydraulic

Element Data

• Material housing: PVC
• Material connector: PVC
• Housing length: 500 mm (20 inch) +/- 2.0
• Element length**: 603 mm (24 inch) +/- 3.0
• Element length: 664 mm (26 inch) +/- 3.0
• Distance permeate connector-feed connector**: 145 mm (6 inch) +/- 1.0
• Distance permeate connector-feed connector: 224 mm (9 inch) +/- 1.0
• Distance permeate connector-element center: 73 mm (161 inch) +/- 2.0
• Permeate connection male OD: 1"
• Feed connection male OD: 1"
• Housing OD: 75 mm (3 inch)
• Element OD: 90 mm (4 inch)
• Endcaps ID**: 40 mm (2 inch)
• Weight: 1.5 kg (3 lbs) ** without screw ends (provided separately)

Membrane Type

• Material: PES
• Type: SevenBore®
• Diameter bores ID: 0.9 mm (0.04 inch)
• Diameter fiber OD: 4.0 mm (0.16 inch)
• MWCO: 100-150 kD
• Area: 1.25 m² (13 ft²)

Operating limits

Typical Process Conditions

• Maximum operating temperature: 40 °C (104 °F)
• Maximum system pressure: 10 bar (145 psi)
• Trans membrane pressure:
  • operation: < 1.0 bar (< 14.5 psi)
  • maximum: 2.5 bar (36 psi)
• pH range during operation: 3-10

Product water

Productivity

• clean water at 25° C (77°F): 1300-1600 l/m²barh (53-65 gfd/psi)
• process: 100 to 350 l/m²h (60 to 210 gfd)
• backwash/forward flush: 250 l/m²h (150 gfd)
• Permeate flow at 100 l/m² h: 125 l/h (1 gpm)

Cleaning

• Soaking time during cleaning: min 5 min
• pH range during cleaning: 1-13
• Disinfecting chemicals:
  • hypochlorite (NaOCl): 50-200 ppm
  • hydrogenperoxide (H₂O₂): 100-200 ppm

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror