FS10-FC-FUS1582

Summary

Product identification

• Product Name: ULTRADYN HOLLOW FIBER UF MEMBRANE MODULE
• Model: FS10-FC-FUS1582
• Filtration Type: Ultrafiltration
• Membrane Material: Polyethersulfone
• Molecular Cutoff: 150,000 Dalton
• Hollow Fiber Inner Diameter: 0.8 mm
• Membrane Area: 5.0 m²
• Manufacturer: DAICEN Membrane Systems Ltd. (markets and distributes under the registered trademark MOLSEP®)

Operating limits

• Feed Inlet Pressure, max.: 0.6 MPa (at room temperature; applicable max. pressure depends on operating temperature)
• Transmembrane Pressure, max.: 0.3 MPa
• Temperature, max.: 98 °C
• Applicable pH Range: 1 ~ 13

Feed water

• Standard Inlet Feed Flow: 3.8 m³/h (adjusted to 1 m/sec feed velocity; optimum velocity may differ per application)

Product water

• Standard Water Flux: 5.3 m³/h (initial water flux by dead end filtration with pure water under T.M.P. 0.1 MPa at 25°C)
• Shipping Water Flux Range: 4.0 m³/h (initial water flux by dead end filtration with pure water under T.M.P. 0.1 MPa at 25°C)

Mechanical / hydraulic

• Module Components:
  • Nozzle cap: Polysulfone (2 units)
  • Cap: Polysulfone (2 units)
  • Case: Polysulfone (1 unit)
  • O-Ring type WG-21: FPM (Fluoro rubber) (2 units)
  • Potting resin: Epoxy resin
• Dimensions: See the official PDF for exact tabulated values and corresponding component diagrams.
• Weight at Operation: 8.5 kg
• Weight at Shipping: 2.5 kg
• Connectors:
  • Feed/Concentrate: 2S Ferrule
  • Permeate: 1S Ferrule
• Standard Preservative: 1000 ppm Benzoic acid

Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror