FS10-FC-FUS5082

Summary

Product identification

• Module Name: FS10-FC-FUS5082
• Product Type: ULTRADYN Hollow Fiber UF Membrane Module
• Manufacturer: DAICEN Membrane Systems Ltd. (markets and distributes under the registered trademark MOLSEP®)

Standard Configurations

• Filtration Type: Ultrafiltration
• Membrane Material: Polyethersulfone
• Molecular Cutoff: 500,000 Dalton
• Hollow Fiber Inner Diameter: 0.8 mm
• Membrane Area: 5.0 m²
• Standard Preservative: 1000 ppm Benzoic acid

Operating Limits

• Max. Feed Inlet Pressure: 0.6 MPa (at room temperature)
• Max. Transmembrane Pressure: 0.3 MPa
• Max. Temperature: 98 °C
• Applicable pH Range: 1 ~ 13
  • Note: Applicable max. pressure depends on operating temperature. Ensure instruction manual.

Performance Data

• Standard Water Flux: 5.3 m³/h (Initial water flux by dead end filtration with pure water under T.M.P. 0.1 MPa at 25°C)
• Shipping Water Flux Range: 4.4 m³/h (Initial water flux by dead end filtration with pure water under T.M.P. 0.1 MPa at 25°C)
• Standard Inlet Feed Flow: 3.8 m³/h (Adjusted to 1 m/sec feed velocity; optimum velocity may differ per application)

Mechanical / Hydraulic

• Weight at Operation: 8.5 kg
• Weight at Shipping: 2.5 kg
• Connectors:
  • Feed/Concentrate: 2S Ferrule
  • Permeate: 1S Ferrule
• Module Components:
  • Nozzle cap: Polysulfone (2 units)
  • Cap: Polysulfone (2 units)
  • Case: Polysulfone (1 unit)
  • O-Ring type WG-21: FPM (Fluoro rubber) (2 units)
  • Potting resin: Epoxy resin
  • Note: Specific dimensions for module components are available in the official PDF.

Disclaimer

MICRODYN-NADIR reserves the right to change specifications without prior notification. This extraction may miss figures, footnotes, or revisions present in the original document. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror