ZW700B-9060 standard

Summary

Product identification

• Model: ZW700B-9060
• Full model name: ZW700B-9060/UF10/7B/XA/0.8/55
• Description: ZeeWeed ultrafiltration (UF) module featuring SevenBore fiber technology with an inside-out flow orientation. The SevenBore fiber is a robust polyethersulfone (PES) product.

Mechanical / hydraulic

• Material housing: PVC
• Housing length: 1537.5 +/-1.0 mm (60.5 +/- 0.04 inch)
• Permeate connection ID: 42.6 +/- 0.5 mm (1.7 +/-0.02 inch)
• Element OD: 220 mm (8.66 inch)
• Weight: 24 kg (53 lbs.)
• Flow orientation: Inside-Out filtration
• Mounting: Modules can be mounted vertically, or installed horizontally in pressure vessels. If used in horizontal orientation, two spacer rings per module are required, along with any permeate interconnectors.

Operating limits

• Maximum operating temperature: 40°C (104°F)
• Max. Operating Pressure, installed vertically with end-caps: 5 bar (72.5 psi)
• Max. Operating Pressure, installed horizontally in housing: See specifications of membrane housing supplier
• Trans Membrane Pressure (TMP), typical operation: <1.0 bar (<14.5 psi)
• TMP maximum: 2.5 bar (36 psi)
• Backwash/forward flush: 250 lm²/h (150 gfd)
• pH range during operation: 2 to 11

Membrane type

• Material: PES
• Type: SevenBore
• Diameter bores ID: 0.8 mm (0.03 inch)
• Area: 55 m² (592 ft²)

Cleaning

• Cleaning pH range: 1.0-13.0
• Disinfecting Chemical:
  • Hypochlorite (NaOCl): 50 to 200 ppm
  • Hydrogen Peroxide: 100 to 200 ppm

General properties

• UF membrane for optimal removal of particulates, bacteria, and viruses.
• PES membrane fibers with 7 bores provide high mechanical strength (>10x that of single fibers) and chemical resistance.
• Inside-Out filtration eliminates air scouring step and additional related equipment.

Storage and handling

• Elements are filled with glycerin when new, as part of the fiber manufacturing and preservation process.
• Elements must be stored in a dry and normal ventilated location, away from any sources of heat, ignition, and direct sunlight in the original packing.
• The storage temperature must be between 5°C and 35°C (45°F to 91°F).

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror