Kleen MCT105

Summary

Product identification

Kleen* MCT105 is a low pH liquid cleaner from SUEZ Water Technologies & Solutions. It is NSF certified for use in potable water applications (certified to NSF/ANSI Standard 60).

Description

Kleen MCT105 is a low pH liquid cleaner containing a blend of acids, chelants, and complexing agents. It is specifically designed to remove deposited metals (e.g., aluminum and iron) and scale deposits (e.g., calcium carbonate) from thin-film and cellulose acetate membranes.

Key Features

• Compatible with all thin-film and cellulose acetate membranes.
• Low foaming liquid product.
• Buffered to maintain an effective pH throughout the cleaning process.

Typical Applications

Kleen MCT105 is used for clean-in-place (CIP) off-line cleaning of RO membranes when scaling or fouling impacts performance. Indications for cleaning include decreased normalized permeate flow, increased operating pressure, increased differential pressures, and increased salt passage.

General Cleaning Guidelines

• Recommended Dilution: One pound (0.45 kg) of Kleen MCT105 per 5 gallons (19 L) of water, or one gallon (3.8 L) of MCT105 per 50 gallons (189 L) of water. The dosage may be reduced for low to moderate fouling.
• Contact Time: Typical contact time is 1 to 3 hours. Up to 24 hours soak time may be necessary for severe fouling.
• System Rinsing: Rinse the system between acid and alkaline cleanings.
• System Flush: After cleaning, flush the system until the pH of the concentrate or reject is within +/- 1 pH unit of the feed water before returning to service (for NSF compliance).

Safety Precautions

A Material Safety Data Sheet (MSDS) is available on request.

---

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror