Novus CE2666

Summary

Product identification

• Product Name: Novus* CE2666
• Manufacturer: Water Technologies & Solutions (SUEZ)
• Product Type: Liquid, high molecular weight, cationic emulsion polymer

Description and Use

Novus CE2666 is a liquid cationic emulsion polymer designed for solid/liquid separation applications and sludge dewatering. It functions as a component within a total SUEZ treatment program.

Typical Applications

• Sludge Dewatering: Increases solids capture, produces drier cake, and improves effluent quality.
• Wastewater Clarification and Thickening: Acts as a settling aid to decrease effluent suspended solids by forming large, fast-settling agglomerates, resulting in high-quality effluent.
• Specific Industries: Especially effective for settling bio-solids in secondary clarifiers and in thickening and sludge dewatering in the organic chemical and refining industries.

Treatment and Feeding Requirements

• Initial Agitation: Thoroughly agitate with a drum mixer or recirculating pump for 30-60 minutes before initial use to ensure homogeneity.
• Daily Agitation: Remix the polymer for several minutes each day. Bulk system recirculation packs should be operated for 30-60 minutes daily.
• Contamination Prevention: Avoid water contamination from condensation or rain in open containers.
• Solution Preparation:
  • Can be prepared using a continuous emulsion make-down unit or a batch system.
  • Batch System:
    • Fill the solution preparation tank to at least 2/3 full with water, ensuring the agitator blade is submerged.
    • Begin agitation and slowly add the homogeneous polymer into the vortex.
    • Fill the tank with water to achieve a 0.25 to 0.75% solution.
    • Continue mixing at low speed (350 rpm) for an additional 10 to 20 minutes.
    • Avoid high-speed agitation to prevent polymer degradation.
  • Stock solutions can be transferred to a holding tank for continuous supply and further dilution.

Mechanical / Hydraulic

• Pumping: Neat Novus CE2666 can be handled with appropriately sized gear or diaphragm pumps suitable for viscosities up to approximately 2500 cps.
• Material Compatibility:
  • Satisfactory: Type 304 stainless steel, polyethylene, and rigid PVC for tanks, tubing, piping, and pumps. Viton and fluorosilicon-type rubbers for pump components and hose linings.
  • Short-term use only: Flexible PVC tubing (e.g., Tygon), Buna-N, and Neoprene rubber.
  • Tolerable if discoloration is acceptable: Mild steel and copper alloys.

General Properties

Physical properties are detailed in the Material Safety Data Sheet (MSDS), available upon request.

Packaging Information

Available in various containers and delivery methods. Contact a SUEZ representative for details.

Storage

• Store at moderate temperatures (40°F-90°F [4°C-32°C]).
• Protect from freezing.
• Prevent rapid or repeated temperature changes that may cause condensation.

Safety Precautions

Refer to the Material Safety Data Sheet (MSDS) for detailed information.

Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror