Testomat 808

Summary

Product Identification

• Product Name: Testomat® 808
• Type: Limit value monitoring device for water hardness

Application

• Reverse osmosis plants
• Soft water for commercial purposes
• Pure water production plants
• Galvanization

Measuring Range

• Water hardness: 0.02 – 3 °dH (0.4….54 ppm CaCO₃)

Technical Data

Electrical

• Power Supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz
• Instrument Protection: 230 – 240 V: T0,1 A; 115 V: T0,2 A; 24 V: T0,8 A
• Mains Protection for Consumers: max. 4 A (n, l)
• Power Consumption: max. 16 VA (without external load)
• Protection Class: I
• Current Interface: Output of defined values (5, 8, 11, 14, 17, 20 mA) for displaying status and error messages, max. load 500 Ohms
• Contact Load Relay: 230V / 4A AC ohm resistive load

Mechanical / Hydraulic

• Dimensions: B x H x T = 364 x 314 x 138 mm
• Weight: 4350 g
• Degree of Protection: IP 54

Operating Limits

• Ambient Temperature: 10 – 40 °C; 50 - 104°F

Feed Water

• Operating Pressure: Depending on product configuration:
  • 0.3 – 1 bar / 0.3 x 10⁵ to 1 x 10⁵ Pa
  • 1 - 4 bar / 1 x 10⁵ to 4 x 10⁵ Pa
  • (A pressure reducer (special accessory) should be used from 4 to 8 bar range)
• Water Inlet: Opaque hose with 6 mm external diameter / 4 mm internal diameter
• Water Outlet: Hose with 6 mm external diameter / 4 mm internal diameter
• Water Temperature: 10 to 40 °C; 50 to 104°F

Conformity

• EN 61000-6-2
• EN 61000-6-4
• EN 61010-1

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror