Automatic hardness control
1 model in this family. Representative models: Testomat EVO TH.

International brand dossier
Testomat is the online analyzer family from Gebrüder Heyl / Heyl Analysis Technologies, best known for automatic hardness and water-quality monitoring in treatment facilities.
Testomat is the online analyzer family from Gebrüder Heyl / Heyl Analysis Technologies, best known for automatic hardness and water-quality monitoring in treatment facilities.It is important where softeners, RO pretreatment, cooling circuits, boilers, and drinking-water installations need continuous residual-hardness or limit-value supervision.
Testomat's position in instrumentation and sensors is defined by product families such as Automatic hardness control, The Testomat Family › Testomat 2000, The Testomat Family › Testomat 2000 DUO and The Testomat Family › Testomat 2000 CAL.
The portfolio is best understood inside online water-quality measurement, process control, chemical dosing feedback, plant monitoring, and safety interlocks, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Testomat EVO TH, Testomat 2000 and Testomat 2000 DUO.Engineers should compare measured parameter, range and accuracy, wetted materials, calibration workflow, and control-system communication.
33
Models and series
2
Product families
9
Subfamilies
Quick Model Index
Search specifications and compare candidates with products from other brands in the same category.
Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.
Showing 33 of 33 models
Compare 2–4 compatible models across brands. Your shortlist is saved on this device.
Testomat EVO TH
Automatic hardness control
Ambient temperature: 10 to 40°C · Water Temperature: Water exceeding 40°C can cause burns and damage. A cooler must be installed if temperatures exceed 40°C · Measurement Water Temperature: Must be between 10 and 40°C
The Testomat EVO TH is an online analysis instrument for the automatic determination and monitoring of residual total hardness in water.
Testomat 2000
The Testomat Family › Testomat 2000
Water Pressure: 0.3 bar to 8 bar (factory setting is 1 to 8 bar). For 0.3 to 1 bar operation, a flow controller valve body must be removed · Water Temperature: 10 °C to 40 °C. A cooler is recommended for temperatures above 40 °C · Recommended maximum hose length: 5 m
The Testomat 2000 is an online analysis unit for determining and monitoring water hardness, carbonate hardness, p-value, or minus m-value.
Testomat 2000 DUO
The Testomat Family › Testomat 2000 DUO
Reagent pH Range: 4 – 10.5 (use Heyl Testomat 2000® indicators) · Water Inlet Connection: Standard plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm/internal diameter 4 mm, wall thickness 1 mm). Maximum inlet hose length: 5 m · Water Outlet Connection: Opaque outlet hose (internal diameter 14 mm)
The Testomat 2000 DUO is an online analysis instrument designed for automatic monitoring of water hardness, carbonate hardness, and p- or minus m-values.
Testomat 2000 CAL
The Testomat Family › Testomat 2000 CAL
Water outlet connection: Connect to an opaque outlet hose (internal diameter 14 mm). Lay the hose without backwater or syphoning effect to the drain · Freely selectable hardness units: °dH, °f, ppm CaCO₃, mmol/l
The Testomat 2000 CAL is an automated online water analysis unit for measuring parameters like total hardness and carbonate hardness.
Testomat Eco
The Testomat Family › Testomat Eco
pH range: Above 4 · Water inlet connection: Standard plug connector for plastic hoses 6/4 x 1 · Water outlet connection: Requires outlet hose with internal diameter 12 mm
The Testomat Eco is an online instrument for automatically determining and monitoring residual total hardness in water with a pH above 4.
Testomat 2000 CLT
The Testomat Family › Testomat 2000 CLT
Measuring range: 0 – 2.5 mg/l (ppm) total chlorine · Water inlet connection: Standard plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm/internal diameter 4 mm, wall thickness 1 mm) · Water outlet connection: Connect to an outlet hose (internal diameter 12 mm). Lay the hose without backwater development and any syphoning effect to the drain, e.g., via an open funnel
The Testomat 2000 CLT is an online process photometer designed for monitoring total chlorine concentration in drinking water.
Testomat 2000 CLF
The Testomat Family › Testomat 2000 CLF
Mains voltage connection: 24 V / 115 V / 230 V AC · Water Inlet Connection: Standard plug connector for plastic hoses 6/4 x 1 · Water Outlet Connection: Connection for opaque outlet hose (internal diameter 14 mm)
The Testomat 2000 CLF is a process photometer for online monitoring of free chlorine concentration in applications like drinking water disinfection.
Testomat 2000 THCL
The Testomat Family › Testomat 2000 THCL
Total Chlorine Measuring Range: 0 - 2.5 mg/l (ppm) · pH Range: 4 - 10.5 · Hose Connections: Standard with plug connector for opaque plastic hoses 6/4 x 1. Optional adapter for quick-acting coupling available
The Testomat 2000 THCL is a combined process photometer for total chlorine and process titrator for water hardness.
Testomat 2000 FE
The Testomat Family › Testomat 2000 FE
Range I: 0 - 0.65 mg/l, with a resolution of 0.01 mg/l · Range II: 0.7 – 1.0 mg/l, with a resolution of 0.1 mg/l · pH Range: 4 – 10.5
The Testomat 2000 Fe is a process photometer for online monitoring of dissolved iron in water using colorimetric analysis.
Testomat
The Testomat Family › Application
Silica (SiO₂) measuring range: 0.3 - 1.2 ppm · Power supply: 24V / 115V / 230V, 50 – 60 Hz (depending on configuration) · Ambient temperature: 10 – 40 °C (50 - 104°F)
The Testomat 808 SiO2 is a silica monitoring instrument designed for hospital sterilisation applications.
Testomat 808
The Testomat Family › Application
Power Supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz · Water hardness: 0.02 – 3 °dH (0.4….54 ppm CaCO₃) · Instrument Protection: 230 – 240 V: T0,1 A; 115 V: T0,2 A; 24 V: T0,8 A
The Testomat 808 is a limit value monitoring device designed for water hardness analysis in applications such as reverse osmosis and pure water production.
Testomat ECO C
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Water temperature: 10 to 40 °C (50 to 104°F) · Ambient temperature: 10–45 °C (50 - 104°F)
The Testomat ECO C is an automatic titrator for determining carbonate hardness and acid capacity in applications such as swimming pools and water treatment plants.
Testomat 2000 CN
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Water hardness: 0.05–25 °dH · Carbonate hardness: 0.5–20 °dH
The Testomat 2000 CN is an online water hardness analyzer designed for the Chinese market, featuring a Mandarin menu and English language options.
Testomat 2000 V
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Water hardness: 1.0–25.0 °dH · Carbonate hardness: 1.0–20.0 °dH (depending on indicator choice)
The Testomat 2000 V is an automated control system for measuring water and carbonate hardness, suitable for regulating water blending systems in cooling circuits and...
Testomat 2000 self clean
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65
The Testomat 2000 self clean is an analyzer designed for difficult water applications to reduce contamination and extend service life.
Testomat 2000 Antox
The Testomat Family › Application
Selection cues: measuring range · accuracy · output signal and process connection
The Testomat 2000 Antox is an analyzer for continuous measurement of free chlorine.
Testomat 2000 DUO CN
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)
The Testomat 2000 DUO CN is an instrument for monitoring water quality in water treatment and drinking-water plants, capable of operating in two circuits with different...
Testomat 2000 CLT self clean
The Testomat Family › Application
Measuring range (Total chlorine): 0.00 - 0.99 mg/l and 1.0 - 2.5 mg/l · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F)
The Testomat 2000 CLT self-clean is a process photometer designed for disinfectant monitoring in drinking and process water, featuring an integrated detergent dosing pump.
Testomat 2000 CLO2
The Testomat Family › Application
Measurement range: 0–4.7 mg/l (ppm) · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F)
The Testomat 2000 CLO2 is an online instrument for monitoring chlorine dioxide content in drinking and process water.
Testomat 2000 Br
The Testomat Family › Application
Measurement Range: 0–5.6 mg/l (ppm) bromine (Br₂) · Power Supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient Temperature: 10–45 °C (50 - 104°F)
The Testomat 2000 Br is a wet-chemical online instrument for monitoring disinfectant dosing.
Testomat 2000 CrVl
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65
The Testomat 2000 CrVl is an online wet-chemical monitor for chromate and hexavalent chromium using photometric analysis.
Testomat 2000 Polymer
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (50–60 Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65
The Testomat 2000 Polymer is a process photometer and wet-chemical online monitor designed for polyacrylate content in cooling and heating circuits.
Testomat 2000 PO4
The Testomat Family › Application
Measuring range: 0.0-10.0 mg/l · Accuracy: < 10% at end of measuring range · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz)
The Testomat 2000 PO4 is an online process photometer designed for monitoring phosphate content in applications such as process water, production water, and wastewater.
Testomat 2000 SO3
The Testomat Family › Application
Ambient temperature: 10–45 °C · Operating pressure: 1 to 8 bar (15 to 116 psi) or 0.3 to 1 bar (5 to 15 psi), after removing of the valve body out of the regulator/filter housing · Water temperature: 10 to 40 °C
The Testomat 2000 SO3 is an online, wet-chemical instrument for monitoring sulfite content in boiler feed water.
Titromat KH
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC all 50–60Hz · Power consumption: max. 30 VA · Degree of protection: IP 65
The Titromat KH is an automatic analyzer designed for measuring and monitoring carbonate hardness in high hardness ranges, suitable for applications like open coolant...
Titromat M1
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, or 24 VAC, all 50–60 Hz · Power consumption: Max. 30 VA · Degree of protection: IP 65
The Titromat M1 is an instrument for automatically determining and monitoring carbonate hardness in low hardness ranges.
Titromat M2
The Testomat Family › Application
Ambient temperature: 10–45 °C · Water temperature: 10 to 40 °C · Supply voltage: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz)
The Titromat M2 is an instrument for automatic determination and monitoring of carbonate hardness in low hardness measuring ranges.
Titromat TH
The Testomat Family › Application
Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)
The Titromat TH automatically determines and monitors carbonate hardness for high ranges in applications like drinking water production and raw water monitoring.
Maintenance and service sets ECO
The Testomat Family › Application
Selection cues: measuring range · accuracy · output signal and process connection
This is a maintenance and service set for Testomat ECO devices. It includes various gaskets, O-rings, fuses, and a cleaning brush set for regular upkeep.
Maintenance Instructions Testomat 2000 & ECO
The Testomat Family › Application
Inlet pressure 2 bar: 200 ml measuring water adjustment + 18.1 ml analysis volume = 218.1 ml per analysis
This document provides maintenance instructions for the Testomat 2000 and Testomat ECO water analysis instruments.
Maintenance Instructions Testomat 808
The Testomat Family › Application
Selection cues: measuring range · accuracy · output signal and process connection
This document provides detailed maintenance and service instructions for the Testomat® 808 water quality monitoring instrument.
Maintenance Instructions Testomat 808 SiO2
The Testomat Family › Application
Twist Protection: Ensure correct alignment of pump heads on the motor shaft using the twist protection features
This document provides maintenance and service instructions for the Testomat 808 SiO2 instrument.
Spares for Testomat 2000 & 808
The Testomat Family › Application
Selection cues: measuring range · accuracy · output signal and process connection
These are spare parts kits and individual components designed for the maintenance of Testomat 2000 and Testomat 808 series online water analysis instruments.
Product range and selection
This section answers two questions: which main product families Testomat offers, and which parameters to compare before choosing a specific model.
The main families shown on this page are Automatic hardness control and The Testomat Family. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
After choosing a product family, compare measurement parameter, sample condition, signal integration, and maintenance frequency. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
2 product families on this page.
Automatic hardness control
1 model in this family. Representative models: Testomat EVO TH.
The Testomat Family
32 models in this family, organized across 9 subfamilies. Representative models: Testomat 2000, Testomat 2000 DUO, Testomat 2000 CAL.
Brand Products & Technical Documents
View product applications, datasheets and family manuals.
1 product profiles
32 product profiles
Product profile
The Testomat 808 SiO2 is a silica monitoring instrument designed for hospital sterilisation applications.
Product profile
The Testomat 808 is a limit value monitoring device designed for water hardness analysis in applications such as reverse osmosis and pure water production.
Product profile
The Testomat ECO C is an automatic titrator for determining carbonate hardness and acid capacity in applications such as swimming pools and water treatment plants.
Product profile
The Testomat 2000 CN is an online water hardness analyzer designed for the Chinese market, featuring a Mandarin menu and English language options.
Product profile
The Testomat 2000 V is an automated control system for measuring water and carbonate hardness, suitable for regulating water blending systems in cooling circuits and...
Product profile
The Testomat 2000 self clean is an analyzer designed for difficult water applications to reduce contamination and extend service life.
Product profile
The Testomat 2000 Antox is an analyzer for continuous measurement of free chlorine.
Product profile
The Testomat 2000 DUO CN is an instrument for monitoring water quality in water treatment and drinking-water plants, capable of operating in two circuits with different...
Product profile
The Testomat 2000 CLT self-clean is a process photometer designed for disinfectant monitoring in drinking and process water, featuring an integrated detergent dosing pump.
Product profile
The Testomat 2000 CLO2 is an online instrument for monitoring chlorine dioxide content in drinking and process water.
Product profile
The Testomat 2000 Br is a wet-chemical online instrument for monitoring disinfectant dosing.
Product profile
The Testomat 2000 CrVl is an online wet-chemical monitor for chromate and hexavalent chromium using photometric analysis.
Product profile
The Testomat 2000 Polymer is a process photometer and wet-chemical online monitor designed for polyacrylate content in cooling and heating circuits.
Product profile
The Testomat 2000 PO4 is an online process photometer designed for monitoring phosphate content in applications such as process water, production water, and wastewater.
Product profile
The Testomat 2000 SO3 is an online, wet-chemical instrument for monitoring sulfite content in boiler feed water.
Product profile
The Titromat KH is an automatic analyzer designed for measuring and monitoring carbonate hardness in high hardness ranges, suitable for applications like open coolant...
Product profile
The Titromat M1 is an instrument for automatically determining and monitoring carbonate hardness in low hardness ranges.
Product profile
The Titromat M2 is an instrument for automatic determination and monitoring of carbonate hardness in low hardness measuring ranges.
Product profile
The Titromat TH automatically determines and monitors carbonate hardness for high ranges in applications like drinking water production and raw water monitoring.
Product profile
This is a maintenance and service set for Testomat ECO devices. It includes various gaskets, O-rings, fuses, and a cleaning brush set for regular upkeep.
Product profile
This document provides maintenance instructions for the Testomat 2000 and Testomat ECO water analysis instruments.
Product profile
This document provides detailed maintenance and service instructions for the Testomat® 808 water quality monitoring instrument.
Product profile
This document provides maintenance and service instructions for the Testomat 808 SiO2 instrument.
Product profile
These are spare parts kits and individual components designed for the maintenance of Testomat 2000 and Testomat 808 series online water analysis instruments.
Product profile
The Testomat 2000 CLF is a process photometer for online monitoring of free chlorine concentration in applications like drinking water disinfection.
Product profile
The Testomat 2000 DUO is an online analysis instrument designed for automatic monitoring of water hardness, carbonate hardness, and p- or minus m-values.