Testomat

Summary

Product identification

• Product: Testomat 808 SiO2
• Application: Sterilisation of hospitals, silica monitoring

Operating limits

• Silica (SiO₂) measuring range: 0.3 - 1.2 ppm
• Ambient temperature: 10 – 40 °C (50 - 104°F)
• Water temperature: 10 to 40 °C (50 to 104°F)

Feed water

• Operating pressure:
  • 0.3 – 1 bar (0.3 x 10⁵ to 1 x 10⁵ Pa)
  • 1 - 4 bar (1 x 10⁵ to 4 x 10⁵ Pa)
  • (Note: A pressure reducer is recommended from 4 to 8 bar)
• Water inlet hose: 6 mm external diameter / 4 mm internal diameter
• Water outlet hose: 6 mm external diameter / 4 mm internal diameter

Electrical

• Power supply: 24V / 115V / 230V, 50 – 60 Hz (depending on configuration)
• Instrument protection: T0,1 A (230-240V); T0,2 A (115V); T0,8 A (24V)
• Mains protection for consumers: max. 4 A (N, L)
• Power consumption: max. 16 VA (without external load)
• Protection class: I
• Current interface: Output of defined values (5, 8, 11, 14, 17, 20 mA); max. load 500 Ohms
• Contact load relay: 230V / 4A AC ohm resistive load

Mechanical / hydraulic

• Dimensions (W x H x D): 364 x 314 x 138 mm
• Dimensions with side pocket: 442 x 314 x 138 mm
• Weight: 4350 g
• Degree of protection: IP 54

Conformity

• EN 285:2006
• EN 61000-6-2
• EN 61000-6-4
• EN 61010-1

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror