AGA

Summary

Product identification

• Product Line: CENTRIFUGAL PUMPS
• Model Series: AGA
• Frequency: 60 Hz
• Manufacturer: EBARA Pumps Europe S.p.A.
• Revision: D

Operating limits

• Liquid Temperature: min. +5 °C, max. +45 °C
• Maximum Working Pressure:
  • 0.6 MPa (AGA 076-106 models)
  • 1.0 MPa (AGA 156-206-306 models)
• Maximum Suction Depth: 8 m
• Rotation Speed: ≈3450 min⁻¹
• Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid the risk of over-heating.

Feed water

• Type of Liquid Handled: Clean water
• Test Conditions for Performance Curves: Clean water at 20°C temperature with a kinematic viscosity of ν = 1 mm²/s (1 cSt).

Electrical

• Motor Type: Electric - TEFC
• Number of Poles: 2
• Insulation Class: F
• Protection Degree (CEI EN 60034-5): IP 44
• Frequency: 60 Hz
• Power Rating:
  • Single Phase: 0.44÷1.5 kW (0.6÷2 HP)
  • Three Phase: 0.44÷2.2 kW (0.6÷3 HP)
• Efficiency Level (Three Phase): IE3* from 0.75 kW up to 2.2 kW (*only for 460V)
• Voltage:
  • Single Phase: 110-115 ±6% V, 220-230 ±6% V
  • Three Phase: 220/380 –6% +10% V (0.55 kW), 220/380 ±10% V (from 0.75 kW up to 2.2 kW), 220/380-460 ±10% V (IE3* 0.75 kW up to 2.2 kW)
• Capacitor:
  • Single Phase: Built in
  • Three Phase: Not applicable
• Overload Protection:
  • Single Phase: Built in
  • Three Phase: Provided by the user
• Motor Casing Material: Aluminium
• Base Material / Motor Support: Plastic foot / Cast iron
• Dimensions of Cable Entry: PG11 - PG13.5 - M16x1.5 - M20x1.5 (see page 400 of the official PDF)
• Capacitor Values, Efficiency, and Current Data: See the official PDF for exact tabulated values.

Mechanical / hydraulic

• Pump Type: Closed centrifugal type
• Shaft Seal Type: Mechanical seal
• Bearing Type: Sealed ball bearing
• Pipe Connection (UNI ISO 228):
  • Suction: G 1 (AGA 076-106 models), G 1½ (AGA 156-206-306 models)
  • Discharge: G 1
• Materials:
  • Casing: Cast iron
  • Impeller: PPE+PS glass fibre reinforced (AGA 076-106 models), Brass (AGA 156-206-306 models)
  • Shaft Seal: Ceramic/Carbon/NBR
  • Casing Cover: AISI 304 (AGA 076-106 models), Cast iron built-in the motor bracket (AGA 156-206-306 models)
  • Shaft: AISI 303 (wet extension)
  • Bracket: Aluminium (AGA 076-106 models), Cast iron (AGA 156-206-306 models)
  • Ejector: PPE+PS glass fibre reinforced
  • Diffuser: PPE+PS glass fibre reinforced
• Mechanical Seal Components:
  • Up to 0.75 kW: Rotary seal ring (Carbon graphite), Stationary seal ring (Ceramic), Gasket (NBR), Bellows (NBR), O-Ring (AISI 304), Self-driving spring (AISI 304), Frame (AISI 304), Retainer ring (AISI 304).
  • 1.1 kW and above: Rotary seal ring (Ceramic), Stationary seal ring (Carbon graphite), O-Ring (NBR), O-Ring (NBR), O-Ring (NBR), Self-driving spring (AISI 316), Frame (AISI 304).
• Impeller Diameter:
  • AGA 076: 110 mm
  • AGA 106: 116 mm
  • AGA 156: 122 mm
  • AGA 206: 135 mm
  • AGA 306: 144 mm
• Applicable Standard of Test: ISO 9906:2012 - Grade 3B
• Bearing Types, Dimensions, and Weights: See the official PDF for exact tabulated values.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror