AGA-AGC

Summary

Product identification

EBARA PUMPS EUROPE S.p.A. Centrifugal Pumps, models AGA-AGC, 50Hz.

Operating limits

• Liquid Handled Temperature:
  • min. +5 °C
  • max. +45 °C
• Maximum working pressure:
  • 0.6 MPa (AGA 0.60-0.75-1.00)
  • 1.0 MPa (AGA 1.50-2.00-3.00; all AGC)
• Maximum suction depth: 8 m
• Rotation speed:
  • ≈ 2800 min⁻¹ (AGA 0.60, AGA 0.75, AGA 1.00)
  • ≈ 2850 min⁻¹ (AGA 1.50, AGA 2.00, AGA 3.00, AGC 1.50, AGC 2.00, AGC 3.00)
• Pumps should not be used at a flow rate below 10% of best efficiency point to avoid the risk of over-heating.
• Applicable standard of test: ISO 9906 – Annex A

Feed water

• Type of liquid: Clean water
• Performance curve measurements: Carried out with clean water at 20°C of temperature and with a kinematic viscosity of ν = 1 mm²/s (1 cSt).

Product water

A selection chart provides capacity (Q) in l/min and m³/h, and total manometric head (H) in meters for various pump types and power ratings. Performance curves for individual models are also available. See the official PDF for exact tabulated values and detailed performance curves.

Electrical

• Motor Type: Electric - TEFC
• No. of Poles: 2
• Insulation Class: F
• Protection degree (CEI EN 60034-5): IP 44
• Frequency: 50 Hz
• Power rating:
  • Single Phase: 0.44÷1.5 kW (0.6÷2 HP)
  • Three Phase: 0.44÷2.2 kW (0.6÷3 HP)
• Voltage:
  • Single Phase: 230 ±10% V
  • Three Phase: 230/400 ±10% V
• Capacitor:
  • Single Phase: Built in
  • Three Phase: -
• Over load protection:
  • Single Phase: Built in
  • Three Phase: Provided by the user
• Efficiency level (Reg. 640/2009):
  • Single Phase: -
  • Three Phase: IE2 from 0.75 kW up to 2.2 kW, IE3 from 0.75 kW up to 2.2 kW
• Detailed motor data including efficiency, input power, full load current, and locked rotor current for various models and phases are available. See the official PDF for exact tabulated values.

Mechanical / hydraulic

• Impeller: Closed centrifugal type
• Shaft seal type: Mechanical seal
• Bearing: Sealed ball bearing
• Pipe Connection (UNI ISO 228):
  • Suction: G 1 (AGA 0.60-0.75-1.00), G 1½ (AGA 1.50-2.00-3.00; all AGC)
  • Discharge: G 1
• Materials:
  • Casing: Cast iron
  • Impeller: PPE+PS glass fibre reinforced (AGA 0.60-0.75-1.00), Brass (AGA 1.50-2.00-3.00; all AGC)
  • Shaft seal: Ceramic/Carbon/NBR
  • Casing cover: AISI 304 (AGA 0.60-0.75-1.00), Cast iron built-in on the motor bracket (AGA 1.50-2.00-3.00; all AGC)
  • Shaft: AISI 303 (wet extension)
  • Bracket: Aluminium (AGA 0.60-0.75-1.00), Cast iron (AGA 1.50-2.00-3.00; all AGC)
  • Ejector: PPE+PS glass fibre reinforced
  • Diffuser: PPE+PS glass fibre reinforced
  • Motor Casing material: Aluminium
  • Base material / Motor support: Plastic foot / Cast iron
• Mechanical Seal components:
  • Up to 0.75 kW: Rotary seal ring (carbon graphite), Stationary seal ring (ceramic), Gasket (NBR), Bellows (NBR), Ring (AISI 304), Self driving spring (AISI 304), Frame (AISI 304), Retainer ring (AISI 304).
  • 1.1 kW and above: Rotary seal ring (ceramic), Stationary seal ring (carbon graphite), O Ring (NBR), O Ring (NBR), O Ring (NBR), Self driving spring (AISI 316), Frame (AISI 304).
• Impeller diameter:
  • 130 mm (AGA 0.60, AGA 0.75, AGA 1.00)
  • 143 mm (AGA 1.50, AGC 1.50)
  • 157 mm (AGA 2.00, AGC 2.00)
  • 164 mm (AGA 3.00, AGC 3.00)
• Dimensions of cable entry: PG11 - PG13.5 – M16x1.5 – M20x1.5
• Detailed bearing types (e.g., 6202 2RSH, 6204 2RSH, 6203 2RSH, 6202-ZZ C3, 6204-ZZ C3, 6203-ZZ C3) are listed per model and phase. Pump dimensions (mm) and weight (kgf), as well as packing dimensions and weight, are also provided in tables. See the official PDF for exact tabulated values.

Noise Data

• LpA - dB(A) *:
  • 71 dB(A) (for models with power 0.45 kW to 1 kW)
  • 76 dB(A) (for models with power 1.1 kW to 3 kW)
• Tolerance: ± 2.5 dB.
• * Mean value of several measures at 1m distance around the pump.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror