Ama-Porter

Summary

Product identification

The Ama-Porter is a fully floodable submersible motor pump designed for drainage and waste water applications. It features a close-coupled, single-stage design for vertical installation.

Main applications:

• Drainage systems
• Water extraction
• Drainage

Fluids handled:

• Grey water
• Waste water containing long fibres and solid substances
• Gas-containing fluids

Impeller types:

• Free-flow impeller (Type F): Suitable for fluids containing solids and stringy material, as well as fluids with entrapped air or gas.
• Impeller with cutter (Type S): Suitable for faeces, domestic sewage, and waste water containing long fibres.

Designation example: Ama-Porter SB 545 SE

• Ama-Porter: Type series
• S: Impeller type (F impeller if blank, S impeller if 'S')
• B: Starting aid (Without start capacitor if blank, With start capacitor if 'B')
• 5: Size (5_ _ for DN 50, 6_ _ for DN 65)
• 01: Impeller size (example)
• SE: Motor version (SE for Single-phase AC motor with float switch, NE for Single-phase AC motor without float switch, ND for Three-phase asynchronous motor without float switch)

Certifications:

• Europe: Suitable for plants to Standard EN 12050-1
• Europe: BMW (test report) Nos.: 0420266-01 to 05

Operating limits

Operating data:

• Ama-Porter (F impeller):
  • Flow rate Q: 40 m³/h (11 l/s)
  • Head H: 16 m
• Ama-Porter S (S impeller):
  • Flow rate Q: 17 m³/h (4.7 l/s)
  • Head H: 21 m
• Fluid temperature t: max. +40°C (+70°C for short periods)
• Maximum temperature of fluid handled: 40 °C (for motor versions SE, NE, ND)
• Mode of operation: S1 – submerged (max. 10 m)
• Maximum switching frequency (DOL starting): 15 starts per hour

Feed water

Free passage:

• Ama-Porter 5_ _ (F impeller): 41 mm to 45 mm
• Ama-Porter 6_ _ (F impeller): 56 mm to 60 mm
• Ama-Porter S 545 (S impeller): 7 mm

Electrical

Drive:

• Single-phase AC motor:
  • 50 Hz: 230 V
  • With integrated temperature switch
• Three-phase asynchronous motor:
  • 50 Hz: 400 V
  • DOL starting
• Enclosure: IP68 (permanently submerged) to EN 60529 / IEC 529
• Thermal class of winding insulation: F

Motor protection:

• Three-phase motor: Protected against overheating due to generously sized motor.
• AC motor: Protected against overheating by thermal switches in the windings.

Power cable:

• Type: Rubber-sheathed cable H07RN8-F 3x1² (for single-phase), H07RN8-F 4x1² (for three-phase)
• Length: 10 m (Optional: 20 m)
• Cable entry: Absolutely watertight

Monitoring equipment:

• Winding temperature
• Thermal motor protection

Technical data: Specific electrical data (P1, P2, IN, IA, Mains connection [mm²]) varies by model (Ama-Porter 5_ , Ama-Porter 6 _, Ama-Porter S 545), impeller type, voltage (230 V 1~, 400 V 3~), and cable length (10 m, 20 m). See the official PDF for exact tabulated values.

Mechanical / hydraulic

Shaft seal:

• Drive end: Shaft seal ring
• Pump end: 1 bi-directional mechanical seal with liquid reservoir

Bearings:

• Grease-lubricated bearings sealed for life

Coating and preservation:

• Surface treatment: Blasted to SA 2 1/2 to DIN EN ISO 12944
• Top coat: Two-component high-solid epoxy resin finish (RAL 5002), min. layer thickness = 75 µm
• Special coating: Available on request

Materials:

• Casing: JL 1030
• F impeller: JL 1030
• S impeller: JL 1040
• Cutter (Ama-Porter S 545): 1.2080 (K100)
• Shaft: 1.4021
• Shaft seal (Drive end): Shaft seal ring
• Shaft seal (Pump end, Ama-Porter 5_ _ / 6_ _): Mechanical seal SiC / AL₂O₃
• Shaft seal (Pump end, Ama-Porter S 545): Mechanical seal SiC / SiC
• Bolts and nuts: A2
• Joint rings: Nitrile
• Float switch: Polypropylene

Installation types and depths:

• Wet-installed stationary pump sets
• Wet-installed transportable pump sets
• Installation depths:
  • Stationary, with guide hoop: 1.5 m, 1.8 m, 2.1 m
  • Stationary, with single guide rail: 4.5 m
  • Stationary, with twin guide rail: 4.5 m
  • Stationary, with guide wire: 4.5 m
  • Transportable: 4.5 m

Sump dimensions (minimum):

• Ama-Porter 5_ _: A x A 600 x 600, B 160, C 190, D 450
• Ama-Porter 6_ _: A x A 600 x 600, B 170, C 190, D 480
• Ama-Porter S 545: A x A 600 x 600, B 160, C 190, D 450

Dimensions: Detailed dimensions for various transportable and stationary wet-installed models (with guide wire/hoop, single guide rail, twin guide rails, duckfoot bend, or straight pump foot) are available in the official PDF.

Accessories: A wide range of accessories is available, including:

• Installation parts: For stationary wet installation (guide hoop, guide wire, single/twin guide rail arrangements) and transportable models (adapter for hose connection, connection elbow, feet, hose clip).
• Chains: Stainless steel, short-linked, tested to Directive 2006/42/EC, available in 2 m, 3 m, 5 m, and 10 m lengths, with a maximum load of 160 kg.
• Pump accessories: Flanges, threaded flanges, elbows, Storz rigid couplings, plastic hoses (with/without couplings), hose clips, RK swing check valves, socket gate valves, KSB check valves, ECOLINE GTR-16P gate valves, and suction strainers.
• Control units and switchgear: Motor protection switchgear (MSE, MSD, Hyper), LevelControl Basic 2 control units for single-pump and dual-pump stations (supporting float switch, 4-20 mA sensor, pneumatic, or bubbler control), alarm switchgears (AS 0, AS 1, AS 2, AS 4, AS 5), and various control unit/switchgear accessories (float switches, leakage sensors, pressure bell sets, horns, alarm combinations, strobe lights, PC service tools, rechargeable battery retrofit kits). Specific models and their compatibility are detailed in the official PDF.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror