Centrifugal pump
17 models in this family. Representative models: CPKN, CPKNO, Etabloc.
International brand dossier
KSB Pumps
KSB is a German pump and valve manufacturer with a long industrial history and a portfolio spanning centrifugal, multistage, process, and utility pumping.In water and wastewater projects it is relevant where plant-scale reliability, materials, hydraulic efficiency, and serviceability are more important than small packaged-equipment convenience.
KSB Pumps's position in pumps and pumping equipment is defined by product families such as Centrifugal pump, Process pump, Multistage pump and In-Line pump.The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.
Representative series on this page include CPKN, CPKNO and Etabloc.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.These cues help users understand the brand's strongest fit before moving into the model index and product cards for finer comparison.
99
Indexed models
28
Product families
0
Subgroups
Product range and selection
How to choose KSB Pumps & Pumping
This section answers two questions: which main product families KSB offers, and which parameters to compare before choosing a specific model.
Step 1: Choose a product family by application
The main families shown on this page are Centrifugal pump, Process pump, Multistage pump, and In-Line pump. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
Step 2: Confirm the model by key parameters
After choosing a product family, compare flow and head, materials, efficiency, and duty cycle. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
Product family overview
Showing 6 main families; all 28 appear in the model index below.
Process pump
12 models in this family. Representative models: RPH, RPH-HW, RPH-LF.
Multistage pump
3 models in this family. Representative models: Comeo, Movitec, Movitec VCI.
In-Line pump
4 models in this family. Representative models: Etaline, Etaline Pro, Etaline SYT.
Self priming pump
4 models in this family. Representative models: AU, Etaprime B, Etaprime L.
Chemical pump
1 model in this family. Representative models: MegaCPK.
Quick Model Index
Fast lookup for 99 indexed products
The table is intentionally compact: use it to scan model names, product families, and source links quickly. Open the profile cards below when you want richer context.
Centrifugal pump
17 indexed models
| Model | Application | Sources |
|---|---|---|
| CPKN | The KSB CPKN is a pump designed for various industrial applications, available in many sizes and operating at 50 Hz with nominal speeds of 960, 1450, or 2900 rpm. | |
| CPKNO | The KSB CPKNO is a series of standardized centrifugal chemical pumps with a back pull-out design suitable for aggressive liquids and polymerizing fluids. | |
| Etabloc | The KSB Etabloc is a close-coupled centrifugal pump designed for various fluid handling applications including water supply and cooling circuits. | |
| Etabloc SYT | The Etabloc SYT is a pump designed for thermal oil and hot water applications, suitable for heat transfer systems and hot water circulation. | |
| Etachrom | The KSB Etachrom L is a close-coupled, single-stage pump designed to EN 733 for various water and fluid handling applications. | |
| Etachrom B | The KSB Etachrom B is a series of closed-coupled, standardized pumps designed for a wide range of applications including water treatment, supply, and general industry. | |
| Etachrom L | The KSB Etachrom L is a range of standardized, close-coupled single-stage pumps designed to EN 733, suitable for various water and industrial applications. | |
| Etanorm | The KSB Etanorm is a series of standardized, horizontal, back-pull-out, single-stage volute casing centrifugal pumps with shaft seals for European, Middle Eastern. | |
| Etanorm RSY | The KSB Etanorm-RSY is a long-coupled, volute casing centrifugal pump designed for handling thermal oil up to 350°C or hot water up to 180°C. | |
| Etanorm SYT | The KSB Etanorm SYT is a series of horizontal, back-pull-out centrifugal pumps designed for handling thermal oil and hot water. | |
| Etanorm V | The Etanorm V is a vertical, single-stage centrifugal pump designed for installation in closed tanks under atmospheric pressure. | |
| HPK | The KSB HPH is a hot water circulating pump designed for high-pressure hot water generating plants. These pumps feature a horizontal. | |
| HPK L | The KSB HPK-L is a horizontal, back-pull-out centrifugal volute casing pump designed for handling hot water and heat transfer fluids in various heating and circulation... | |
| Magnochem | The Magnochem is a standardized chemical pump featuring a magnetic coupling and available in W, D, and -Bloc variants for various industrial applications. | |
| Magnochem-bloc | The KSB Magnochem-Bloc is a seal-less, close-coupled volute casing pump designed for handling aggressive, explosive. | |
| MultiEco | The KSB MultiEco is a self-priming, close-coupled, multistage centrifugal pump designed for domestic water supply and general water transfer applications. | |
| Sewabloc | The KSB Sewabloc is a close-coupled, dry-installed volute casing pump designed for various wastewater applications. It features a shaft seal. |
Process pump
12 indexed models
| Model | Application | Sources |
|---|---|---|
| RPH | The KSB RPH is a heavy-duty, single-stage, single-suction OH2 process pump designed to API 610 / ISO 13709 for demanding refinery and petrochemical applications. | |
| RPH-HW | The RPH-HW is a hot water recirculation pump designed for industrial plants and power generation. | |
| RPH-LF | The KSB RPH-LF is a single-suction, single-stage OH2 process pump designed to API 610 standards for refineries and chemical industries. | |
| RPHb | The KSB RPHb is a heavy-duty, single-suction, two-stage process pump designed to API 610 standards for refinery and petrochemical applications. | |
| RPHd | The KSB RPHbd is a heavy-duty, double-suction, two-stage process pump designed to API 610 standards for refineries and petrochemical applications. | |
| RPH-RO | The KSB RPH-RO is a single-stage, horizontal, process volute casing pump designed for reverse osmosis water desalination systems. | |
| RPH-V | The KSB RPH-V is a heavy-duty, vertical, single-stage sump pump designed for chemical and petrochemical applications, meeting API 610 standards. | |
| RWCP/RWCN | The KSB RWCP/RWCN are vertical centrifugal pumps designed for wells, ditches, and tanks, handling neutral to aggressive liquids with significant solid content. | |
| WKB | The KSB WKB-E is a vertical, heavy-duty single-casing pump designed to API 610 standards for critical applications. | |
| WKT | The KSB WKT is a vertical, can-type, multistage ring-section pump designed for handling condensate in power stations and industrial plants. | |
| WKTB | The KSB WKTB is a multistage, vertical ring-section pump designed for condensate transport. | |
| WKTR | The WKTR is a vertical, high-pressure centrifugal pump designed per API 610 10th edition, Category VS6, for hydrocarbons and ammonia handling. This radially split. |
Multistage pump
3 indexed models
| Model | Application | Sources |
|---|---|---|
| Comeo | The KSB Comeo is a horizontal, close-coupled multistage centrifugal pump designed for clean or slightly aggressive fluids. | |
| Movitec | The Movitec H(S)I is a horizontal, multistage centrifugal pump designed for high-pressure applications with a flow rate up to 27 m³/h and head up to 195 m. | |
| Movitec VCI | The KSB Movitec VCI is a vertical, multistage, high-pressure immersion centrifugal pump designed for machine tools, industrial washing machines, and condensate transport. |
In-Line pump
4 indexed models
| Model | Application | Sources |
|---|---|---|
| Etaline | The KSB Etaline is an in-line pump designed for various water supply, heating, and industrial recirculation systems, available in fixed and variable speed versions. | |
| Etaline Pro | The KSB EtaLine Pro is a fully integrated, close-coupled, single-stage in-line pump for various water supply, heating, and industrial recirculation systems. | |
| Etaline SYT | The KSB Etaline SYT is an in-line, single-stage centrifugal pump designed for thermal oil and hot water circulation in various industrial applications. | |
| ILN | The KSB ILN series comprises vertical, single-stage, in-line centrifugal pumps designed for applications including heating, cooling, and water supply systems. |
Self priming pump
4 indexed models
| Model | Application | Sources |
|---|---|---|
| AU | The KSB AU series are self-priming centrifugal pumps designed for handling dirty water with solids up to 45 mm. | |
| Etaprime B | The KSB Etaprime B is a close-coupled, self-priming volute casing pump designed for horizontal installation. | |
| Etaprime L | The KSB Etaprime L is a self-priming, single-stage, single-suction volute casing pump designed for reliable fluid transfer. | |
| Vitaprime | The KSB Vitaprime is a hygienic, self-priming side channel pump for horizontal installation in food, beverage, and chemical industries. |
Chemical pump
1 indexed model
End suction pump
1 indexed model
High/Low pressure pump
2 indexed models
| Model | Application | Sources |
|---|---|---|
| Multitec | The KSB Multitec is a high-pressure, multistage centrifugal pump designed for water supply, industrial applications, and more. | |
| Multitec E/F/V ro | The KSB Multitec E/F/V RO is a high-pressure multistage centrifugal pump designed for applications such as water supply and pressure boosting. |
Condensate pump
1 indexed model
Standardised pump
1 indexed model
Borehole pump
4 indexed models
| Model | Application | Sources |
|---|---|---|
| Ixo N | The KSB Ixo N is a submersible borehole pump designed for various water supply, irrigation, and extraction applications. | |
| Ixo Pro | The KSB Ixo Pro is a multistage submersible borehole pump designed for rainwater harvesting, pressure boosting, and water extraction. | |
| UPA 200 / UPA S 200 | The KSB UPA 200 is a submersible borehole pump designed for applications such as water supply, irrigation, and industrial water handling. Available in cast iron, bronze. | |
| UPA C 150 | The KSB UPA 150C is a submersible borehole pump designed for applications including irrigation, pressure boosting, and water supply. |
Drainage pump
7 indexed models
| Model | Application | Sources |
|---|---|---|
| Ama-drainer | The KSB Ama-Drainer N is a submersible wastewater pump available in multiple models for drainage, groundwater maintenance, and general disposal applications. | |
| Ama-Porter | The KSB Ama-Porter is a fully floodable submersible motor pump designed for drainage and wastewater applications, available with free-flow or cutter impellers. | |
| Amarex | The KSB Amarex is a submersible motor pump designed for wastewater transport, drainage, and treatment plant applications. | |
| Amarex KRT | The Amarex KRT is a fully floodable, non-self-priming submersible motor pump designed for waste water management, service water supply. | |
| Amarex N | The KSB Amarex N is a non-self-priming, submersible motor pump designed for versatile wastewater applications. | |
| Amarex ns | The KSB Amarex N S 32-160 is a submersible motor pump designed for handling domestic, raw, and grey wastewater. | |
| Amarex Pro | The KSB Amarex Pro is a submersible motor pump designed for demanding waste water applications. |
Immersion pump
1 indexed model
Transfer fluid pump
2 indexed models
| Model | Application | Sources |
|---|---|---|
| Filtra-N | The KSB Filtra N is a series of single-stage, self-priming centrifugal pumps designed for swimming pool filter systems. | |
| MK | The KSB MK series offers vertical, single-stage volute casing pumps for drainage, waste water, condensate, and heat transfer fluids. |
Boiler feed pump
1 indexed model
Circulation pump
4 indexed models
| Model | Application | Sources |
|---|---|---|
| Calio | The KSB Calio is a high-efficiency, variable-speed circulator pump for building services, suitable for heating, ventilation, and cooling systems. | |
| Calio Pro | The KSB Calio Pro is a high-efficiency heating circulator pump with variable speed control, suitable for a wide range of HVAC and circulation systems. | |
| Calio S | The KSB Calio S is a high-efficiency circulator pump designed for heating, ventilation, air-conditioning, and circulation systems. | |
| Calio Therms | The KSB Calio-Therm S is a high-efficiency drinking water circulator pump designed for potable water and food/beverage industry applications. This maintenance-free. |
Re-circulation pump
2 indexed models
| Model | Application | Sources |
|---|---|---|
| LUVA | The KSB LUVA is a hermetically sealed boiler recirculation pump designed for hot water recirculation in fossil-fuelled and solar power plants. | |
| LUVm | The KSB LUVm pump is a hermetically sealed unit designed for reactor coolant and clean-up systems. It features a symmetrically forged. |
Barrel pump
1 indexed model
Tubelar casing pump
4 indexed models
| Model | Application | Sources |
|---|---|---|
| RSR | The KSB RSR is a reactor coolant pump designed for pressurized water reactors, available in cast or forged configurations. | |
| RUV | The KSB RUV is a customized Reactor Coolant Pump for generation 3+ nuclear power stations. | |
| PHZ | The PHZ is a vertical tubular casing pump designed for applications such as desalination, power plant cooling, and water extraction in pumping stations. | |
| PNW | The KSB PNW is a vertical tubular casing pump designed for applications including irrigation, storm water handling, and raw water transport. |
Slurry pump
11 indexed models
| Model | Application | Sources |
|---|---|---|
| HVF | The KSB HVF is a High Volume Froth Pump designed for air-entrained slurries in mining and mineral processing applications. | |
| LCC-H | The KSB LCC-H is a high-performance, wear-resistant slurry pump designed for applications with abrasive or corrosive slurries. | |
| LHD | The KSB LHD is designed for low head, high flow applications within the GIW LSA Pump Series. | |
| LSA | The KSB LSA pump series is a heavy-duty, abrasion-resistant pump designed for a wide range of demanding industrial applications like mineral processing and ash handling. | |
| MDX | The KSB MDX is a heavy-duty slurry pump designed for severe mill duty applications such as SAG, ball, and rod mill discharge. | |
| Omega | The KSB Omega/Omega V is a single-stage, axially split volute casing pump designed for waterworks, desalination, and pressure boosting applications. | |
| RDLO | The KSB RDLO is a single-stage, axially split volute casing pump designed for various water supply and transport applications. | |
| RDLP | The KSB RDLP is an axially split volute casing pump designed for horizontal installation with one, two, or three stages and a double-entry radial impeller. | |
| TBC | The KSB TBC is a horizontal end suction centrifugal pump designed for high-head and high-flow hydraulic transport of abrasive slurries. | |
| WBC | The KSB WBC is a heavy-duty pump designed for long-distance ore and tailings slurry transport, capable of handling high pressures and sudden surge events. | |
| ZW | The KSB ZW is a double-suction vertical pump engineered for highly abrasive slurries and dewatering applications. |
Centrifugal casing pump
2 indexed models
| Model | Application | Sources |
|---|---|---|
| KWP | This KWP is a dry-installed, single-stage, single-suction centrifugal pump with a back pull-out design suitable for contaminated fluids, wastewater, and slurries. | |
| KWP-Bloc | The KSB KWP-Bloc is a dry-installed, single-stage volute casing pump designed for handling contaminated fluids, wastewater, and slurries. |
Turbine pump
1 indexed model
Tank pump
1 indexed model
Submersible pump
5 indexed models
| Model | Application | Sources |
|---|---|---|
| Amacan D | The KSB AmaCan D is a submersible motor pump with an open multi-vane impeller designed for a variety of water transport applications including irrigation, stormwater. | |
| Amacan k | The KSB Amacan K is a close-coupled, single-stage submersible motor pump designed for vertical installation in a discharge tube and suitable for contaminated. | |
| Amacan P | The KSB Amacan P is a single-stage, vertical, submersible propeller pump designed for installation in discharge tubes and available in various material variants for... | |
| Amacan S | The KSB Amacan S is a submersible mixed flow pump designed for installation in a discharge tube, suitable for handling grey water, river water, stormwater. | |
| Amaline | The KSB Amaline is a submersible motor pump designed for horizontal, wet installation, featuring a self-cleaning axial propeller and models for various nominal diameters. |
Safety Related pump
1 indexed model
Hygienic pump
4 indexed models
| Model | Application | Sources |
|---|---|---|
| Vitacast | The KSB Vitacast is a hygienic, single-stage centrifugal process pump designed for food, beverage, and pharmaceutical industries. | |
| Vitacast Bloc | The Vitacast Bloc is an investment-cast centrifugal pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries. | |
| Vitachrom | PDF datasheet mirror for Vitachrom (KSB Pumps). | |
| Vitastage | The Vitastage is a multistage, close-coupled hygienic centrifugal pump designed for food and beverage, chemical, and industrial applications handling pure liquids. |
Rotary Lobe pump
1 indexed model
Brand Technical Documents
99 readable document pages
These document pages collect product manuals, model notes, accessory documents, and application files for this brand in the current category. Open the PDF when original tables, diagrams, or full manuals are needed.
Ama-drainer
The KSB Ama-Drainer N is a submersible wastewater pump available in multiple models for drainage, groundwater maintenance, and general disposal applications.
Ama-Porter
The KSB Ama-Porter is a fully floodable submersible motor pump designed for drainage and wastewater applications, available with free-flow or cutter impellers.
Amacan D
The KSB AmaCan D is a submersible motor pump with an open multi-vane impeller designed for a variety of water transport applications including irrigation, stormwater.
Amacan k
The KSB Amacan K is a close-coupled, single-stage submersible motor pump designed for vertical installation in a discharge tube and suitable for contaminated.
Amacan P
The KSB Amacan P is a single-stage, vertical, submersible propeller pump designed for installation in discharge tubes and available in various material variants for...
Amacan S
The KSB Amacan S is a submersible mixed flow pump designed for installation in a discharge tube, suitable for handling grey water, river water, stormwater.
Amaline
The KSB Amaline is a submersible motor pump designed for horizontal, wet installation, featuring a self-cleaning axial propeller and models for various nominal diameters.
Amarex
The KSB Amarex is a submersible motor pump designed for wastewater transport, drainage, and treatment plant applications.
Amarex KRT
The Amarex KRT is a fully floodable, non-self-priming submersible motor pump designed for waste water management, service water supply.
Amarex N
The KSB Amarex N is a non-self-priming, submersible motor pump designed for versatile wastewater applications.
Amarex ns
The KSB Amarex N S 32-160 is a submersible motor pump designed for handling domestic, raw, and grey wastewater.
Amarex Pro
The KSB Amarex Pro is a submersible motor pump designed for demanding waste water applications.
AU
The KSB AU series are self-priming centrifugal pumps designed for handling dirty water with solids up to 45 mm.
B-Pump
The KSB B Pump is a vertical turbine pump designed for water supply applications, available in single or multistage configurations.
Calio
The KSB Calio is a high-efficiency, variable-speed circulator pump for building services, suitable for heating, ventilation, and cooling systems.
Calio Pro
The KSB Calio Pro is a high-efficiency heating circulator pump with variable speed control, suitable for a wide range of HVAC and circulation systems.
Calio S
The KSB Calio S is a high-efficiency circulator pump designed for heating, ventilation, air-conditioning, and circulation systems.
Calio Therms
The KSB Calio-Therm S is a high-efficiency drinking water circulator pump designed for potable water and food/beverage industry applications. This maintenance-free.
CHTC
The KSB CHTC is a horizontal, multistage, barrel-type pump designed for high-pressure applications. It features radial impellers.
Comeo
The KSB Comeo is a horizontal, close-coupled multistage centrifugal pump designed for clean or slightly aggressive fluids.
CPKN
The KSB CPKN is a pump designed for various industrial applications, available in many sizes and operating at 50 Hz with nominal speeds of 960, 1450, or 2900 rpm.
CPKNO
The KSB CPKNO is a series of standardized centrifugal chemical pumps with a back pull-out design suitable for aggressive liquids and polymerizing fluids.
Estigia
The KSB Estigia is a single-stage vertical immersion pump designed for closed tanks under atmospheric pressure, handling a wide range of inorganic and organic fluids.
Etabloc
The KSB Etabloc is a close-coupled centrifugal pump designed for various fluid handling applications including water supply and cooling circuits.
Etabloc SYT
The Etabloc SYT is a pump designed for thermal oil and hot water applications, suitable for heat transfer systems and hot water circulation.
Etachrom
The KSB Etachrom L is a close-coupled, single-stage pump designed to EN 733 for various water and fluid handling applications.
Etachrom B
The KSB Etachrom B is a series of closed-coupled, standardized pumps designed for a wide range of applications including water treatment, supply, and general industry.
Etachrom L
The KSB Etachrom L is a range of standardized, close-coupled single-stage pumps designed to EN 733, suitable for various water and industrial applications.
Etaline
The KSB Etaline is an in-line pump designed for various water supply, heating, and industrial recirculation systems, available in fixed and variable speed versions.
Etaline Pro
The KSB EtaLine Pro is a fully integrated, close-coupled, single-stage in-line pump for various water supply, heating, and industrial recirculation systems.
Etaline SYT
The KSB Etaline SYT is an in-line, single-stage centrifugal pump designed for thermal oil and hot water circulation in various industrial applications.
Etanorm
The KSB Etanorm is a series of standardized, horizontal, back-pull-out, single-stage volute casing centrifugal pumps with shaft seals for European, Middle Eastern.
Etanorm RSY
The KSB Etanorm-RSY is a long-coupled, volute casing centrifugal pump designed for handling thermal oil up to 350°C or hot water up to 180°C.
Etanorm SYT
The KSB Etanorm SYT is a series of horizontal, back-pull-out centrifugal pumps designed for handling thermal oil and hot water.
Etanorm V
The Etanorm V is a vertical, single-stage centrifugal pump designed for installation in closed tanks under atmospheric pressure.
Etaprime B
The KSB Etaprime B is a close-coupled, self-priming volute casing pump designed for horizontal installation.
Etaprime L
The KSB Etaprime L is a self-priming, single-stage, single-suction volute casing pump designed for reliable fluid transfer.
Etaseco
The KSB Etaseco is a sealless, fully enclosed canned motor pump designed for aggressive, inflammable, toxic, volatile.
Filtra-N
The KSB Filtra N is a series of single-stage, self-priming centrifugal pumps designed for swimming pool filter systems.
HGM
The KSB HGM-S is a boiler feed pump for power stations and industrial plants, featuring a robust design with chrome steel impellers and diffusers.
HPK
The KSB HPH is a hot water circulating pump designed for high-pressure hot water generating plants. These pumps feature a horizontal.
HPK L
The KSB HPK-L is a horizontal, back-pull-out centrifugal volute casing pump designed for handling hot water and heat transfer fluids in various heating and circulation...
HVF
The KSB HVF is a High Volume Froth Pump designed for air-entrained slurries in mining and mineral processing applications.
ILN
The KSB ILN series comprises vertical, single-stage, in-line centrifugal pumps designed for applications including heating, cooling, and water supply systems.
INVCP
The KSB INVCP is a vertical, single-stage, radially split volute casing pump designed for organic and inorganic liquids in various industries.
Ixo N
The KSB Ixo N is a submersible borehole pump designed for various water supply, irrigation, and extraction applications.
Ixo Pro
The KSB Ixo Pro is a multistage submersible borehole pump designed for rainwater harvesting, pressure boosting, and water extraction.
KWP
This KWP is a dry-installed, single-stage, single-suction centrifugal pump with a back pull-out design suitable for contaminated fluids, wastewater, and slurries.
KWP-Bloc
The KSB KWP-Bloc is a dry-installed, single-stage volute casing pump designed for handling contaminated fluids, wastewater, and slurries.
LCC-H
The KSB LCC-H is a high-performance, wear-resistant slurry pump designed for applications with abrasive or corrosive slurries.
LHD
The KSB LHD is designed for low head, high flow applications within the GIW LSA Pump Series.
LSA
The KSB LSA pump series is a heavy-duty, abrasion-resistant pump designed for a wide range of demanding industrial applications like mineral processing and ash handling.
LUVA
The KSB LUVA is a hermetically sealed boiler recirculation pump designed for hot water recirculation in fossil-fuelled and solar power plants.
LUVm
The KSB LUVm pump is a hermetically sealed unit designed for reactor coolant and clean-up systems. It features a symmetrically forged.
Magnochem
The Magnochem is a standardized chemical pump featuring a magnetic coupling and available in W, D, and -Bloc variants for various industrial applications.
Magnochem-bloc
The KSB Magnochem-Bloc is a seal-less, close-coupled volute casing pump designed for handling aggressive, explosive.
MDX
The KSB MDX is a heavy-duty slurry pump designed for severe mill duty applications such as SAG, ball, and rod mill discharge.
MegaCPK
The KSB MegaCPK is a single-stage, horizontal centrifugal chemical pump designed with a back pull-out configuration and meeting ISO 5199 standards.
MK
The KSB MK series offers vertical, single-stage volute casing pumps for drainage, waste water, condensate, and heat transfer fluids.
Movitec
The Movitec H(S)I is a horizontal, multistage centrifugal pump designed for high-pressure applications with a flow rate up to 27 m³/h and head up to 195 m.
Movitec VCI
The KSB Movitec VCI is a vertical, multistage, high-pressure immersion centrifugal pump designed for machine tools, industrial washing machines, and condensate transport.
MultiEco
The KSB MultiEco is a self-priming, close-coupled, multistage centrifugal pump designed for domestic water supply and general water transfer applications.
Multitec
The KSB Multitec is a high-pressure, multistage centrifugal pump designed for water supply, industrial applications, and more.
Multitec E/F/V ro
The KSB Multitec E/F/V RO is a high-pressure multistage centrifugal pump designed for applications such as water supply and pressure boosting.
Omega
The KSB Omega/Omega V is a single-stage, axially split volute casing pump designed for waterworks, desalination, and pressure boosting applications.
Overview KSB Etachrom
The KSB Etachrom B is a single-stage annular casing pump designed for horizontal or vertical installation with a back pull-out design.
PHZ
The PHZ is a vertical tubular casing pump designed for applications such as desalination, power plant cooling, and water extraction in pumping stations.
PNW
The KSB PNW is a vertical tubular casing pump designed for applications including irrigation, storm water handling, and raw water transport.
RDLO
The KSB RDLO is a single-stage, axially split volute casing pump designed for various water supply and transport applications.
RDLP
The KSB RDLP is an axially split volute casing pump designed for horizontal installation with one, two, or three stages and a double-entry radial impeller.
RHM/RVM
The KSB RHM is a safety-related pump designed for critical applications including core flooding, emergency cooling, and high-pressure charging systems.
RHR
The KSB RHR is a pump designed for various fluid-handling applications.
Rotex
The KSB Rotex is a series of single-stage centrifugal pumps designed for handling grey water and condensate in disposal, heating, and drainage systems.
RPH
The KSB RPH is a heavy-duty, single-stage, single-suction OH2 process pump designed to API 610 / ISO 13709 for demanding refinery and petrochemical applications.
RPH-HW
The RPH-HW is a hot water recirculation pump designed for industrial plants and power generation.
RPH-LF
The KSB RPH-LF is a single-suction, single-stage OH2 process pump designed to API 610 standards for refineries and chemical industries.
RPH-RO
The KSB RPH-RO is a single-stage, horizontal, process volute casing pump designed for reverse osmosis water desalination systems.
RPH-V
The KSB RPH-V is a heavy-duty, vertical, single-stage sump pump designed for chemical and petrochemical applications, meeting API 610 standards.
RPHb
The KSB RPHb is a heavy-duty, single-suction, two-stage process pump designed to API 610 standards for refinery and petrochemical applications.
RPHd
The KSB RPHbd is a heavy-duty, double-suction, two-stage process pump designed to API 610 standards for refineries and petrochemical applications.
RSR
The KSB RSR is a reactor coolant pump designed for pressurized water reactors, available in cast or forged configurations.
RUV
The KSB RUV is a customized Reactor Coolant Pump for generation 3+ nuclear power stations.
RWCP/RWCN
The KSB RWCP/RWCN are vertical centrifugal pumps designed for wells, ditches, and tanks, handling neutral to aggressive liquids with significant solid content.
Sewabloc
The KSB Sewabloc is a close-coupled, dry-installed volute casing pump designed for various wastewater applications. It features a shaft seal.
TBC
The KSB TBC is a horizontal end suction centrifugal pump designed for high-head and high-flow hydraulic transport of abrasive slurries.
UPA 200 / UPA S 200
The KSB UPA 200 is a submersible borehole pump designed for applications such as water supply, irrigation, and industrial water handling. Available in cast iron, bronze.
UPA C 150
The KSB UPA 150C is a submersible borehole pump designed for applications including irrigation, pressure boosting, and water supply.
Vitacast
The KSB Vitacast is a hygienic, single-stage centrifugal process pump designed for food, beverage, and pharmaceutical industries.
Vitacast Bloc
The Vitacast Bloc is an investment-cast centrifugal pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries.
Vitachrom
PDF datasheet mirror for Vitachrom (KSB Pumps).
Vitalobe
The KSB Vitalobe is a rotary lobe pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries.
Vitaprime
The KSB Vitaprime is a hygienic, self-priming side channel pump for horizontal installation in food, beverage, and chemical industries.
Vitastage
The Vitastage is a multistage, close-coupled hygienic centrifugal pump designed for food and beverage, chemical, and industrial applications handling pure liquids.
WBC
The KSB WBC is a heavy-duty pump designed for long-distance ore and tailings slurry transport, capable of handling high pressures and sudden surge events.
WKB
The KSB WKB-E is a vertical, heavy-duty single-casing pump designed to API 610 standards for critical applications.
WKT
The KSB WKT is a vertical, can-type, multistage ring-section pump designed for handling condensate in power stations and industrial plants.
WKTB
The KSB WKTB is a multistage, vertical ring-section pump designed for condensate transport.
WKTR
The WKTR is a vertical, high-pressure centrifugal pump designed per API 610 10th edition, Category VS6, for hydrocarbons and ammonia handling. This radially split.
ZW
The KSB ZW is a double-suction vertical pump engineered for highly abrasive slurries and dewatering applications.
AI-ready Product Profiles
Product cards for screening and future AI matching
These cards are designed as reusable product profiles: the same format can later appear in AI search results, shortlist views, and assisted product matching.
Centrifugal pump
17 profile cards
Pumps & Pumping
Product profile
CPKN
The KSB CPKN is a pump designed for various industrial applications, available in many sizes and operating at 50 Hz with nominal speeds of 960, 1450, or 2900 rpm.
Pumps & Pumping
Product profile
CPKNO
The KSB CPKNO is a series of standardized centrifugal chemical pumps with a back pull-out design suitable for aggressive liquids and polymerizing fluids.
Pumps & Pumping
Product profile
Etabloc
The KSB Etabloc is a close-coupled centrifugal pump designed for various fluid handling applications including water supply and cooling circuits.
Pumps & Pumping
Product profile
Etabloc SYT
The Etabloc SYT is a pump designed for thermal oil and hot water applications, suitable for heat transfer systems and hot water circulation.
Pumps & Pumping
Product profile
Etachrom
The KSB Etachrom L is a close-coupled, single-stage pump designed to EN 733 for various water and fluid handling applications.
Pumps & Pumping
Product profile
Etachrom B
The KSB Etachrom B is a series of closed-coupled, standardized pumps designed for a wide range of applications including water treatment, supply, and general industry.
Show remaining Centrifugal pump profiles (11)
Pumps & Pumping
Product profile
Etachrom L
The KSB Etachrom L is a range of standardized, close-coupled single-stage pumps designed to EN 733, suitable for various water and industrial applications.
Pumps & Pumping
Product profile
Etanorm
The KSB Etanorm is a series of standardized, horizontal, back-pull-out, single-stage volute casing centrifugal pumps with shaft seals for European, Middle Eastern.
Pumps & Pumping
Product profile
Etanorm RSY
The KSB Etanorm-RSY is a long-coupled, volute casing centrifugal pump designed for handling thermal oil up to 350°C or hot water up to 180°C.
Pumps & Pumping
Product profile
Etanorm SYT
The KSB Etanorm SYT is a series of horizontal, back-pull-out centrifugal pumps designed for handling thermal oil and hot water.
Pumps & Pumping
Product profile
Etanorm V
The Etanorm V is a vertical, single-stage centrifugal pump designed for installation in closed tanks under atmospheric pressure.
Pumps & Pumping
Product profile
HPK
The KSB HPH is a hot water circulating pump designed for high-pressure hot water generating plants. These pumps feature a horizontal.
Pumps & Pumping
Product profile
HPK L
The KSB HPK-L is a horizontal, back-pull-out centrifugal volute casing pump designed for handling hot water and heat transfer fluids in various heating and circulation...
Pumps & Pumping
Product profile
Magnochem
The Magnochem is a standardized chemical pump featuring a magnetic coupling and available in W, D, and -Bloc variants for various industrial applications.
Pumps & Pumping
Product profile
Magnochem-bloc
The KSB Magnochem-Bloc is a seal-less, close-coupled volute casing pump designed for handling aggressive, explosive.
Pumps & Pumping
Product profile
MultiEco
The KSB MultiEco is a self-priming, close-coupled, multistage centrifugal pump designed for domestic water supply and general water transfer applications.
Pumps & Pumping
Product profile
Sewabloc
The KSB Sewabloc is a close-coupled, dry-installed volute casing pump designed for various wastewater applications. It features a shaft seal.
Process pump
12 profile cards
Pumps & Pumping
Product profile
RPH
The KSB RPH is a heavy-duty, single-stage, single-suction OH2 process pump designed to API 610 / ISO 13709 for demanding refinery and petrochemical applications.
Pumps & Pumping
Product profile
RPH-HW
The RPH-HW is a hot water recirculation pump designed for industrial plants and power generation.
Pumps & Pumping
Product profile
RPH-LF
The KSB RPH-LF is a single-suction, single-stage OH2 process pump designed to API 610 standards for refineries and chemical industries.
Pumps & Pumping
Product profile
RPHb
The KSB RPHb is a heavy-duty, single-suction, two-stage process pump designed to API 610 standards for refinery and petrochemical applications.
Pumps & Pumping
Product profile
RPHd
The KSB RPHbd is a heavy-duty, double-suction, two-stage process pump designed to API 610 standards for refineries and petrochemical applications.
Pumps & Pumping
Product profile
RPH-RO
The KSB RPH-RO is a single-stage, horizontal, process volute casing pump designed for reverse osmosis water desalination systems.
Show remaining Process pump profiles (6)
Pumps & Pumping
Product profile
RPH-V
The KSB RPH-V is a heavy-duty, vertical, single-stage sump pump designed for chemical and petrochemical applications, meeting API 610 standards.
Pumps & Pumping
Product profile
RWCP/RWCN
The KSB RWCP/RWCN are vertical centrifugal pumps designed for wells, ditches, and tanks, handling neutral to aggressive liquids with significant solid content.
Pumps & Pumping
Product profile
WKB
The KSB WKB-E is a vertical, heavy-duty single-casing pump designed to API 610 standards for critical applications.
Pumps & Pumping
Product profile
WKT
The KSB WKT is a vertical, can-type, multistage ring-section pump designed for handling condensate in power stations and industrial plants.
Pumps & Pumping
Product profile
WKTB
The KSB WKTB is a multistage, vertical ring-section pump designed for condensate transport.
Pumps & Pumping
Product profile
WKTR
The WKTR is a vertical, high-pressure centrifugal pump designed per API 610 10th edition, Category VS6, for hydrocarbons and ammonia handling. This radially split.
Multistage pump
3 profile cards
Pumps & Pumping
Product profile
Comeo
The KSB Comeo is a horizontal, close-coupled multistage centrifugal pump designed for clean or slightly aggressive fluids.
Pumps & Pumping
Product profile
Movitec
The Movitec H(S)I is a horizontal, multistage centrifugal pump designed for high-pressure applications with a flow rate up to 27 m³/h and head up to 195 m.
Pumps & Pumping
Product profile
Movitec VCI
The KSB Movitec VCI is a vertical, multistage, high-pressure immersion centrifugal pump designed for machine tools, industrial washing machines, and condensate transport.
In-Line pump
4 profile cards
Pumps & Pumping
Product profile
Etaline
The KSB Etaline is an in-line pump designed for various water supply, heating, and industrial recirculation systems, available in fixed and variable speed versions.
Pumps & Pumping
Product profile
Etaline Pro
The KSB EtaLine Pro is a fully integrated, close-coupled, single-stage in-line pump for various water supply, heating, and industrial recirculation systems.
Pumps & Pumping
Product profile
Etaline SYT
The KSB Etaline SYT is an in-line, single-stage centrifugal pump designed for thermal oil and hot water circulation in various industrial applications.
Pumps & Pumping
Product profile
ILN
The KSB ILN series comprises vertical, single-stage, in-line centrifugal pumps designed for applications including heating, cooling, and water supply systems.
Self priming pump
4 profile cards
Pumps & Pumping
Product profile
AU
The KSB AU series are self-priming centrifugal pumps designed for handling dirty water with solids up to 45 mm.
Pumps & Pumping
Product profile
Etaprime B
The KSB Etaprime B is a close-coupled, self-priming volute casing pump designed for horizontal installation.
Pumps & Pumping
Product profile
Etaprime L
The KSB Etaprime L is a self-priming, single-stage, single-suction volute casing pump designed for reliable fluid transfer.
Pumps & Pumping
Product profile
Vitaprime
The KSB Vitaprime is a hygienic, self-priming side channel pump for horizontal installation in food, beverage, and chemical industries.
Chemical pump
1 profile card
Pumps & Pumping
Product profile
MegaCPK
The KSB MegaCPK is a single-stage, horizontal centrifugal chemical pump designed with a back pull-out configuration and meeting ISO 5199 standards.
End suction pump
1 profile card
Pumps & Pumping
Product profile
RHR
The KSB RHR is a pump designed for various fluid-handling applications.
High/Low pressure pump
2 profile cards
Pumps & Pumping
Product profile
Multitec
The KSB Multitec is a high-pressure, multistage centrifugal pump designed for water supply, industrial applications, and more.
Pumps & Pumping
Product profile
Multitec E/F/V ro
The KSB Multitec E/F/V RO is a high-pressure multistage centrifugal pump designed for applications such as water supply and pressure boosting.
Condensate pump
1 profile card
Pumps & Pumping
Product profile
Rotex
The KSB Rotex is a series of single-stage centrifugal pumps designed for handling grey water and condensate in disposal, heating, and drainage systems.
Standardised pump
1 profile card
Pumps & Pumping
Product profile
Etaseco
The KSB Etaseco is a sealless, fully enclosed canned motor pump designed for aggressive, inflammable, toxic, volatile.
Borehole pump
4 profile cards
Pumps & Pumping
Product profile
Ixo N
The KSB Ixo N is a submersible borehole pump designed for various water supply, irrigation, and extraction applications.
Pumps & Pumping
Product profile
Ixo Pro
The KSB Ixo Pro is a multistage submersible borehole pump designed for rainwater harvesting, pressure boosting, and water extraction.
Pumps & Pumping
Product profile
UPA 200 / UPA S 200
The KSB UPA 200 is a submersible borehole pump designed for applications such as water supply, irrigation, and industrial water handling. Available in cast iron, bronze.
Pumps & Pumping
Product profile
UPA C 150
The KSB UPA 150C is a submersible borehole pump designed for applications including irrigation, pressure boosting, and water supply.
Drainage pump
7 profile cards
Pumps & Pumping
Product profile
Ama-drainer
The KSB Ama-Drainer N is a submersible wastewater pump available in multiple models for drainage, groundwater maintenance, and general disposal applications.
Pumps & Pumping
Product profile
Ama-Porter
The KSB Ama-Porter is a fully floodable submersible motor pump designed for drainage and wastewater applications, available with free-flow or cutter impellers.
Pumps & Pumping
Product profile
Amarex
The KSB Amarex is a submersible motor pump designed for wastewater transport, drainage, and treatment plant applications.
Pumps & Pumping
Product profile
Amarex KRT
The Amarex KRT is a fully floodable, non-self-priming submersible motor pump designed for waste water management, service water supply.
Pumps & Pumping
Product profile
Amarex N
The KSB Amarex N is a non-self-priming, submersible motor pump designed for versatile wastewater applications.
Pumps & Pumping
Product profile
Amarex ns
The KSB Amarex N S 32-160 is a submersible motor pump designed for handling domestic, raw, and grey wastewater.
Show remaining Drainage pump profiles (1)
Pumps & Pumping
Product profile
Amarex Pro
The KSB Amarex Pro is a submersible motor pump designed for demanding waste water applications.
Immersion pump
1 profile card
Pumps & Pumping
Product profile
Estigia
The KSB Estigia is a single-stage vertical immersion pump designed for closed tanks under atmospheric pressure, handling a wide range of inorganic and organic fluids.
Transfer fluid pump
2 profile cards
Pumps & Pumping
Product profile
Filtra-N
The KSB Filtra N is a series of single-stage, self-priming centrifugal pumps designed for swimming pool filter systems.
Pumps & Pumping
Product profile
MK
The KSB MK series offers vertical, single-stage volute casing pumps for drainage, waste water, condensate, and heat transfer fluids.
Boiler feed pump
1 profile card
Pumps & Pumping
Product profile
HGM
The KSB HGM-S is a boiler feed pump for power stations and industrial plants, featuring a robust design with chrome steel impellers and diffusers.
Circulation pump
4 profile cards
Pumps & Pumping
Product profile
Calio
The KSB Calio is a high-efficiency, variable-speed circulator pump for building services, suitable for heating, ventilation, and cooling systems.
Pumps & Pumping
Product profile
Calio Pro
The KSB Calio Pro is a high-efficiency heating circulator pump with variable speed control, suitable for a wide range of HVAC and circulation systems.
Pumps & Pumping
Product profile
Calio S
The KSB Calio S is a high-efficiency circulator pump designed for heating, ventilation, air-conditioning, and circulation systems.
Pumps & Pumping
Product profile
Calio Therms
The KSB Calio-Therm S is a high-efficiency drinking water circulator pump designed for potable water and food/beverage industry applications. This maintenance-free.
Re-circulation pump
2 profile cards
Pumps & Pumping
Product profile
LUVA
The KSB LUVA is a hermetically sealed boiler recirculation pump designed for hot water recirculation in fossil-fuelled and solar power plants.
Pumps & Pumping
Product profile
LUVm
The KSB LUVm pump is a hermetically sealed unit designed for reactor coolant and clean-up systems. It features a symmetrically forged.
Barrel pump
1 profile card
Pumps & Pumping
Product profile
CHTC
The KSB CHTC is a horizontal, multistage, barrel-type pump designed for high-pressure applications. It features radial impellers.
Tubelar casing pump
4 profile cards
Pumps & Pumping
Product profile
RSR
The KSB RSR is a reactor coolant pump designed for pressurized water reactors, available in cast or forged configurations.
Pumps & Pumping
Product profile
RUV
The KSB RUV is a customized Reactor Coolant Pump for generation 3+ nuclear power stations.
Pumps & Pumping
Product profile
PHZ
The PHZ is a vertical tubular casing pump designed for applications such as desalination, power plant cooling, and water extraction in pumping stations.
Pumps & Pumping
Product profile
PNW
The KSB PNW is a vertical tubular casing pump designed for applications including irrigation, storm water handling, and raw water transport.
Slurry pump
11 profile cards
Pumps & Pumping
Product profile
HVF
The KSB HVF is a High Volume Froth Pump designed for air-entrained slurries in mining and mineral processing applications.
Pumps & Pumping
Product profile
LCC-H
The KSB LCC-H is a high-performance, wear-resistant slurry pump designed for applications with abrasive or corrosive slurries.
Pumps & Pumping
Product profile
LHD
The KSB LHD is designed for low head, high flow applications within the GIW LSA Pump Series.
Pumps & Pumping
Product profile
LSA
The KSB LSA pump series is a heavy-duty, abrasion-resistant pump designed for a wide range of demanding industrial applications like mineral processing and ash handling.
Pumps & Pumping
Product profile
MDX
The KSB MDX is a heavy-duty slurry pump designed for severe mill duty applications such as SAG, ball, and rod mill discharge.
Pumps & Pumping
Product profile
Omega
The KSB Omega/Omega V is a single-stage, axially split volute casing pump designed for waterworks, desalination, and pressure boosting applications.
Show remaining Slurry pump profiles (5)
Pumps & Pumping
Product profile
RDLO
The KSB RDLO is a single-stage, axially split volute casing pump designed for various water supply and transport applications.
Pumps & Pumping
Product profile
RDLP
The KSB RDLP is an axially split volute casing pump designed for horizontal installation with one, two, or three stages and a double-entry radial impeller.
Pumps & Pumping
Product profile
TBC
The KSB TBC is a horizontal end suction centrifugal pump designed for high-head and high-flow hydraulic transport of abrasive slurries.
Pumps & Pumping
Product profile
WBC
The KSB WBC is a heavy-duty pump designed for long-distance ore and tailings slurry transport, capable of handling high pressures and sudden surge events.
Pumps & Pumping
Product profile
ZW
The KSB ZW is a double-suction vertical pump engineered for highly abrasive slurries and dewatering applications.
Centrifugal casing pump
2 profile cards
Pumps & Pumping
Product profile
KWP
This KWP is a dry-installed, single-stage, single-suction centrifugal pump with a back pull-out design suitable for contaminated fluids, wastewater, and slurries.
Pumps & Pumping
Product profile
KWP-Bloc
The KSB KWP-Bloc is a dry-installed, single-stage volute casing pump designed for handling contaminated fluids, wastewater, and slurries.
Turbine pump
1 profile card
Pumps & Pumping
Product profile
B-Pump
The KSB B Pump is a vertical turbine pump designed for water supply applications, available in single or multistage configurations.
Tank pump
1 profile card
Pumps & Pumping
Product profile
INVCP
The KSB INVCP is a vertical, single-stage, radially split volute casing pump designed for organic and inorganic liquids in various industries.
Submersible pump
5 profile cards
Pumps & Pumping
Product profile
Amacan D
The KSB AmaCan D is a submersible motor pump with an open multi-vane impeller designed for a variety of water transport applications including irrigation, stormwater.
Pumps & Pumping
Product profile
Amacan k
The KSB Amacan K is a close-coupled, single-stage submersible motor pump designed for vertical installation in a discharge tube and suitable for contaminated.
Pumps & Pumping
Product profile
Amacan P
The KSB Amacan P is a single-stage, vertical, submersible propeller pump designed for installation in discharge tubes and available in various material variants for...
Pumps & Pumping
Product profile
Amacan S
The KSB Amacan S is a submersible mixed flow pump designed for installation in a discharge tube, suitable for handling grey water, river water, stormwater.
Pumps & Pumping
Product profile
Amaline
The KSB Amaline is a submersible motor pump designed for horizontal, wet installation, featuring a self-cleaning axial propeller and models for various nominal diameters.
Safety Related pump
1 profile card
Pumps & Pumping
Product profile
RHM/RVM
The KSB RHM is a safety-related pump designed for critical applications including core flooding, emergency cooling, and high-pressure charging systems.
Hygienic pump
4 profile cards
Pumps & Pumping
Product profile
Vitacast
The KSB Vitacast is a hygienic, single-stage centrifugal process pump designed for food, beverage, and pharmaceutical industries.
Pumps & Pumping
Product profile
Vitacast Bloc
The Vitacast Bloc is an investment-cast centrifugal pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries.
Pumps & Pumping
Product profile
Vitachrom
PDF datasheet mirror for Vitachrom (KSB Pumps).
Pumps & Pumping
Product profile
Vitastage
The Vitastage is a multistage, close-coupled hygienic centrifugal pump designed for food and beverage, chemical, and industrial applications handling pure liquids.
Rotary Lobe pump
1 profile card
Pumps & Pumping
Product profile
Vitalobe
The KSB Vitalobe is a rotary lobe pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries.
Overview
1 profile card
Pumps & Pumping
Product profile
Overview KSB Etachrom
The KSB Etachrom B is a single-stage annular casing pump designed for horizontal or vertical installation with a back pull-out design.