Datasheet summary
Amaline
PDF datasheet mirror for Amaline (KSB Pumps). Verify with OEM before design.
Summary
Product Identification
The KSB Amaline is a submersible motor pump designed for horizontal, wet installation. It features an axial propeller, available in self-cleaning ECB propeller variants.
The pump series includes models Amaline 200, 300, 400, 500, 600, and 800, with nominal diameters (DN) corresponding to their series number (e.g., Amaline 200 has DN 200).
Design Details:
- Design: Fully floodable submersible motor pump, horizontal installation, wet installation.
- Axial Propeller: Self-cleaning ECB propeller.
- Shaft Seal: Two bi-directional mechanical seals in tandem arrangement with a liquid reservoir. Amaline 500, 600, 800 models include an additional leakage chamber between the seat ring holder and the gear unit.
- Bearings:
- Amaline 200, 300, 400: Grease-packed rolling element bearings sealed for life.
- Amaline 500, 600, 800: Grease-packed rolling element bearings sealed for life in the motor, and oil-lubricated rolling element bearings in the gear unit.
- Drive: Three-phase asynchronous squirrel-cage motor.
- Amaline 200, 300, 400: Direct drive.
- Amaline 500, 600, 800: Spur gear drive.
Operating Limits
- Fluid Temperature: < 40 °C for all models.
- Immersion Depth: Up to 12 m (larger immersion depths available on request).
- Permissible Ambient Temperature: 40 °C.
- pH for Grey Cast Iron: ≥ 6.5.
- Sand Content for Grey Cast Iron: ≤ 0.5 g/l.
- pH for Duplex Stainless Steel: 1 - 12.
Operating Properties:
| Characteristic | Amaline 200 | Amaline 300 | Amaline 400 |
|---|---|---|---|
| Power P [kW] | 1.25 - 2.5 | 1.8 - 7.5 | 2.5 - 4 |
| Head H [m] | < 2.5 | < 3.4 | < 1.2 |
| Flow rate Q [m³/h] | < 425 | < 1200 | < 1800 |
| Characteristic | Amaline 500 | Amaline 600 | Amaline 800 |
|---|---|---|---|
| Power P [kW] | 4.5 - 17 | 4.5 - 25 | 4.5 - 27 |
| Head H [m] | < 3.5 | < 3.4 | < 1.95 |
| Flow rate Q [m³/h] | < 2700 | < 4700 | < 6600 |
Feed Water
Main Applications:
- Recirculating activated sludge from the nitrification to the denitrification stage of activated sludge tanks.
- Economic handling of stormwater, river water, surface water, and polder water at low heads.
- Generating flow in water bodies.
Fluids Handled:
- Activated sludge
- Stormwater
- River water
- Polder water
- Surface water
Electrical
- Voltage: 400 V 50 Hz (standard), suitable for operation on a frequency inverter. Optional 500 V, 690 V available on request.
- Starting Method:
- Amaline 200, 300, 400: DOL (Direct On Line), or DOL/star-delta for certain 300 models (8 6, 12 6, 20 6 motor sizes).
- Amaline 500, 600, 800: DOL or star-delta.
- Cooling: By surrounding fluid handled.
- Power Cable Length: 10 m (standard). Optional 15 m, 20 m (> 20 m on request).
- Cable Entry: Absolutely watertight.
- Monitoring Equipment:
- Winding Temperature: PTC thermistor.
- Leakage: Leakage sensor in the motor space.
- Optional for non-explosion-proof (U version) Amaline 200/300/400 (stainless steel motor housing): additional leakage sensor in the oil reservoir.
- Optional for non-explosion-proof (U version) Amaline 500/600/800: additional leakage sensor in the leakage chamber.
- Type of Protection: Ex db IIB (applies to explosion-proof pump sets only). Explosion protection II2G Ex db h IIB T4 Gb for YD/YR versions.
- Power Cable Types:
- S1BN8-F rubber-sheathed cable (Standard): Rated voltage 1000 V, Max. continuous insulation temperature 90 °C.
- S07RC4N8-F rubber-sheathed cable (On request): Rated voltage 750 V, EMC screening, Max. continuous insulation temperature 90 °C.
- TEHSITE Tefzel cable (Optional): Rated voltage 750 V, Max. continuous insulation temperature 135 °C.
Mechanical / Hydraulic
- Propeller Speed:
- Amaline 200: 1450 rpm.
- Amaline 300: 960 rpm.
- Amaline 400: 725 rpm.
- Amaline 500, 600: 227 to 719 rpm.
- Amaline 800: 206 to 466 rpm.
- Propeller Diameter:
- Amaline 200: 200 mm.
- Amaline 300: 303 mm.
- Amaline 400: 384 mm.
- Amaline 500: 484 mm.
- Amaline 600: 585 mm.
- Amaline 800: 787 mm.
- Free Passage:
- Amaline 200: 65 mm.
- Amaline 300 (motors 0 6, 2 6): 100 mm.
- Amaline 300 (motor 8 6): 80 mm.
- Amaline 400: 120 mm.
- Amaline 500: 140 mm.
- Amaline 600: 200 mm.
- Amaline 800: 260 mm.
- Materials:
- Pump Casing (C): 1.4571 (austenitic steel).
- Casing Cover: 1.4571 (Amaline 200/300/400), EN-GJL-250 (grey cast iron) (Amaline 500/600/800).
- Gear Housing: EN-GJL-250 (Amaline 500/600/800).
- Adapter: PU.
- Propeller: 1.4571.
- Mechanical Seal: SiC/SiC.
- Shaft: 1.4571 (Amaline 200/300/400, except Amaline 300/86.. G is 1.4021), 1.4122 (Amaline 500/600/800 gear unit output shaft).
- Elastomers: Viton (FPM).
- Bolts/Screws: A4 (corresponds to 1.4571).
- Motor Housing (G): EN-GJL-250 (grey cast iron).
- Motor Housing (C): 1.4581 (austenitic steel) (Amaline 200/300/400).
- Motor Housing Cover: EN-GJL-250 (for 'G' versions), 1.4517 (duplex stainless steel) (Amaline 200/300/400 'C' version).
- Coating: Two-component epoxy resin coating (standard for grey cast iron motor housing, optional for all sizes). Stainless steel motor housing versions have no coating.
Dimensions: Dimensions vary significantly by model and configuration. See the official PDF for exact tabulated values and detailed drawings.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.