Ixo Pro

Summary

Product identification

The KSB Ixo Pro is a submersible borehole pump with an integrated pressure switch.

Designation Key:

• Ixo Pro: Type series
• [Number]: Number of stages (e.g., 4 or 6)
• [Version]: Version (e.g., Pack, Pack Plus)
  • Pack: With Kit-Press (pressure switch connection set)
  • Pack Plus: With Kit-Press (pressure switch connection set) and pump foot

Main applications:

• Rainwater harvesting
• Pressure boosting
• General irrigation systems
• Water extraction

Operating limits

• Flow rate (Q):
  • ≤ 3.9 m³/h
  • ≤ 65 l/min
• Head (H): ≤ 60 m
• Fluid temperature (T): ≥ +5 °C to ≤ +40 °C
• Start-up pressure:
  • 2 bar (Ixo Pro 4 models)
  • 3 bar (Ixo Pro 6 models)
• Maximum working pressure:
  • 6 bar (Ixo Pro 4 models)
  • 12 bar (Ixo Pro 6 models)
• Maximum installation height (x):
  • 15 m (Size 4)
  • 25 m (Size 6)

Feed water

• Clean to turbid water not containing aggressive, abrasive or solid substances.

Electrical

• Drive: Water-cooled single-phase AC motor
• Voltage: 230 V, 50 Hz
• Thermal class: F
• Enclosure: IPX8
• Duty: Continuous duty
• Integrated capacitor:
  • 12 µF (Ixo Pro 4 models)
  • 16 µF (Ixo Pro 6 models)
• Protection:
  • Electronic dry running protection with 4 consecutive start-up attempts
  • Thermal overload protection
• Power cable: H07RNF, 15 m length, includes plug
• Input Power (P1):
  • 0.80 kW (Ixo Pro 4 models)
  • 1.20 kW (Ixo Pro 6 models)
• Rated Power (PN):
  • 0.55 kW (Ixo Pro 4 models)
  • 0.90 kW (Ixo Pro 6 models)
• Rated Current (IN):
  • 3.60 A (Ixo Pro 4 models)
  • 6.20 A (Ixo Pro 6 models)

Mechanical / hydraulic

Design details:

• Centrifugal pump, close-coupled design, multistage
• Integrated pressure switch
• For fully submerged operation
• Low-level inlet
• Suction strainer with a maximum mesh width of 2 mm
• Flow sensor
• Swing check valve
• Bearings: Ball bearing, grease-packed bearings sealed for life
• Shaft seal: Double shaft seal with oil reservoir fitted in between

Materials:

• Pump shroud: Stainless steel AISI 304
• Discharge casing: Stainless steel AISI 304
• Suction strainer: Stainless steel AISI 304
• Diffusers: Technopolymer (glass fibre reinforced polymer)
• Pump shaft: Stainless steel AISI 304
• Impellers: Stainless steel AISI 304
• Mechanical seal: Aluminium graphite, ceramic graphite
• Motor housing: Stainless steel AISI 304

Connections and Dimensions:

• Discharge-side connection: G 1
• Pump set dimensions (approximate A dimension):
  • Size 4: 502 mm
  • Size 6: 569 mm
• Kit-Press (pressure switch connection set) dimensions (approximate):
  • A: 260 mm
  • B: 162 mm
  • C: 124 mm
  • Thread D: G 1

Scope of Supply:

• Multistage submersible borehole pump with integrated pressure switch
• Power cable (H07RNF) incl. plug, length 15 m
• Ixo Pro Pack: Additionally includes Kit-Press (pressure switch connection set)
• Ixo Pro Pack Plus: Additionally includes Kit-Press (pressure switch connection set) and pump foot

Accessories:

• Kit-Press (pressure switch connection set): G 1 connection, 1.2 kg. Comprises an expansion vessel and a shut-off valve with pressure gauge. Installation in the discharge line above the water level is recommended.
• Pump foot: 2.2 kg. Provides option of floating-suction water intake.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror