Datasheet summary
ABCOR INDUCOR 10 HFM 251 ICV
Engineering summary from PDF text extraction for ABCOR INDUCOR 10 HFM 251 ICV. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: ABCOR® - INDUCORTM-G MODULE: 10-HFM-251-ICV
- Module Type: Industrial Multitubular Ultrafiltration Module
- Part Number (KPN): 0712501
- Membrane Chemistry: PVDF
- Membrane Type: HFM (neutral charge)
- Membrane Area: 15.4 ft² (1.4 m²)
- Molecular Weight Cut-Off: 100,000 Dalton (nominal)
- Construction: Seven (7) 1” diameter tubules in a PVC shell
- Face Plate: ABS
- Gasket: VITON®
Operating limits
- Maximum Inlet Pressure: 90 psi @ 119 °F (6.2 bar @ 48 °C)
- Maximum Operating Temperature: 122°F (50 °C) at 84 psi max
- Maximum Permeate Side Back Pressure: 3 psi (0.2 bar)
- Minimum Outlet Pressure: 5 psi (0.3 bar)
- Maximum Feed Side Pressure Drop: 6.6 psi @ 119 °F (0.4 bar @ 48 °C)
- Allowable pH - Continuous Exposure: 2.0 – 10.0 @ 119 °F (48°C)
- Allowable pH - Short Term Exposure: 1.5 – 10.5 @ 119 °F (48°C)
Performance Data
Data based on water at 77° F and specific gravity of 1.0.
| Circulation Flow (gpm) | Circulation Flow (m³/hr) | Crossflow Velocity (f/s) | Crossflow Velocity (m/s) | Pressure Drop (psi) | Pressure Drop (bar) |
|---|---|---|---|---|---|
| 133 | 30 | 7.8 | 2.4 | 2.0 | 0.14 |
| 210 | 48 | 12.3 | 3.7 | 4.3 | 0.29 |
| 266 | 60 | 15.5 | 4.7 | 6.0 | 0.41 |
Mechanical / hydraulic
- Permeate Outlet: 1” Ø (2.54 cm) (2 per module, 180° aligned)
- Shell Connection: VICTAULIC® Style 4” IPS Rolled Groove
Nominal Dimensions:
- A (Overall Length): 110 inches (2794 mm)
- B (Module Outer Diameter): 8 inches (203.2 mm)
- C (End Plate Diameter): 4½ inches (114.3 mm)
Ancillary Parts
KMS recommends the use of KMS supplied ancillary parts. Sealing is provided by o-rings and gaskets; no additional sealing compound or tape is recommended for threaded connections.
INDUCOR™-G Module Process Pass Kits: One Process Pass Kit contains:
- Two Permeate Port Saddle Assemblies
- Two 4” Coupling Assemblies
Available in two styles of Permeate Port Saddle:
- 1” IPS Socket Style Pass Kit KPN 0211875
- 1” FNPT Threaded Style Pass Kit KPN 0211885
Module Assembly Components:
- 4” Process U-Bend: KPN 0020614
- 4” Coupling Assembly: KPN 0125575 (Each assembly contains all needed fastening hardware and one Viton® seal)
- Permeate Port Saddle Assembly:
- 1” IPS Socket Style KPN 0020616
- 1” FNPT Threaded Style KPN 0020618 (Each assembly contains all needed fastening hardware and one Viton® o-ring)
Membrane Incompatibility
Prior to exposing the membrane to any chemical, it should be reviewed by Koch Membrane Systems. Aside from the listed chemicals below, synthetic coolants, semi-synthetic coolants, kerosenes, naphtha, gasoline, and floc polymers may affect membrane performance.
Chemicals that should be avoided:
- Aprotic Solvents (e.g., Dimethyl Formamide, Dimethyl Acetamide, N-Methyl Pyrolidine)
- Chlorinated Solvents (e.g., Methylene Chloride, Chloroform, Carbon Tetrachloride)
- Ketones (e.g., Acetone, Diacetone Alcohol)
- Silicones or Silicone-based Defoamers (e.g., Siloxane)
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM PDF datasheet. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.