TFC 8832 HR-575 Magnum

Summary

Product identification

The FLUID SYSTEMS® TFC®-HR 8” elements are high-rejection, low-pressure reverse osmosis (RO) elements designed for brackish water treatment.

• Membrane Chemistry: Proprietary TFC polyamide
• Membrane Type: TFC-HR membrane
• Construction: Spiral-wound with fiberglass outerwrap
• Applications: High rejection for brackish water treatment
• Available Lengths: 40” (1,016 mm) with standard or high area construction, or 60” (1,524 mm) Magnum® length.

This summary focuses on the 8832 HR-575 Magnum® model.

Specifications

Performance is based on testing a 2,000 mg/l NaCl solution at 225 psi (1,550 kPa) applied pressure, 20% recovery (for Magnum elements), 77°F (25°C), and pH 7.5. Individual element permeate flows may vary +20%/-15%. Minimum chloride ion rejection is 99.2%.

• Model: 8832 HR-575 Magnum®
• Part Number: 8883205
• Permeate Flow: 15,000 gpd (56.8 m³/d)
• Chloride Rejection: 99.5%
• Membrane Area: 575 ft² (53.4 m²)

Operating limits

• Typical Operating Pressure: 225-450 psi (1,550 – 3,100 kPa)
• Maximum Operating Pressure: 600 psi (4,140 kPa)
• Maximum Operating Temperature: 113°F (45°C)
• Maximum Cleaning Temperature: 113°F (45°C)
• Maximum Differential Pressure per Element: 15 psi (104 kPa) for 60” (1,524 mm) long elements (10 psi (69 kPa) for 40” elements)
• Maximum Differential Pressure per Vessel: 60 psi (414 kPa)
• Permeate Pressure Limit: Should not exceed feed-concentrate pressure by more than 5 psi (34 kPa)
• Allowable pH (continuous operation): 4 – 11
• Allowable pH (short-term cleaning): 2.5 – 11
• Maximum Recovery (60” elements): Approximately 20% (site and application specific)

Feed water

• Maximum Feed Turbidity: 1 NTU (feedwater >0.2 NTU often requires frequent cleanings)
• Maximum Feed Silt Density Index (SDI, 15 minute): 5.0
• Maximum Continuous Free Chlorine: <0.1 mg/l
• Chemical Tolerance - Free Chlorine: Approximately 1,000 ppm-hours at 77°F (25°C), pH 8. Intentional exposure to free chlorine or other oxidizing agents (permanganate, ozone, bromine, iodine) is not recommended.
• Chemical Tolerance - Chloramines: Approximately 60,000 ppm-hours at 77°F (25°C), pH 8, in the absence of free chlorine.
• Cationic Polymers and Surfactants: Exposure to these chemicals is not recommended due to potential for irreversible fouling.

Mechanical / hydraulic

• Feed Spacer Thickness: 31/28 mil (0.8/0.7 mm)
• Lubricants: Only recommended silicone lubricant (or approved equivalent), water, or glycerin should be used for O-rings and brine seals. Petroleum or vegetable-based oils may damage the element and void the warranty.

Product Dimensions and Weight for Model 8832 HR-575 Magnum®:

• Length (A): 60 inches (1,524 mm)
• Diameter (B): 8 inches (203.2 mm)
• Permeate Tube ID (C): 1.125 inches (28.6 mm)
• Weight: 64 lbs (29 kg)
• Associated Part Numbers:
  • Interconnector: 0035260
  • O-ring: 0035464
  • Brine Seal: 0035705

---

Disclaimer: This summary is generated from extracted text and may not include all figures, footnotes, or the latest revisions of the official document. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet