ABCOR FEG PLUS 10-HFM-251-PVI

Summary

Product Identification

This document describes the ABCOR™ FEG PLUS™ MODULE: 10-HFM-251-PVI, a tubular ultrafiltration one-inch module designed for industrial applications.

• KMS Part Number (KPN): 0711651
• Membrane Chemistry: PVDF
• Membrane Type: HFM (neutral)
• Membrane Area: 2.2 ft² (0.20 m²)
• Molecular Weight Cut-off: 100,000 Dalton (nominal)
• Housing Construction: CPVC
• Seal: CPVC Insert (Epoxied in Place)
• Gasket: Viton®

Operating Limits

• Maximum Inlet Pressure: 90 psi @ 140°F (6.2 bar @ 60°C)
• Minimum Outlet Pressure: 5 psi (0.3 bar)
• Maximum Operating Temperature (at pH 8.0): 140°F (60°C)
• Maximum Permeate Side Back Pressure: 5 psi (0.3 bar)
• Maximum Feed Side Pressure Drop: 10 psi @ 140°F (0.7 bar @ 60°C)
• Allowable pH - Continuous Exposure: 2.0 - 10.0 @ 140°F (60°C)
• Allowable pH - Short Term Exposure: 1.5 - 10.5 @ 140°F (60°C)

Consult KMS Process Technology for specific applications.

Feed Flow vs. Pressure Drop

Data based on water at 77°F (25°C) and specific gravity of 1.0. Circulation rates exhibit variances of 15%.

Ancillary Parts

KMS recommends that these membranes be used with KMS supplied ancillary parts. Sealing is provided by o-rings and gaskets. No additional sealing compound or tape is recommended for use on threaded connections.

• 1 Terminator Kit (KPN: 0230020)
  • Includes: Holding Nut, PVC (x2); Nipple, PVC (x2); Snap Ring, SS304 (x2)
• 2 U-Bend Assembly, CPVC (KPN: 0020392)
• 3 Holding Nut (PVC) (KPN: 0020281)
• 4 Snap Ring, SS304 (KPN: 0020310)
• 5 Membrane Washer, Viton® (KPN: 0020375)
• 6 Permeate Straight Connector (KPN: 0211800)
• 7 Permeate Pass Kit (for 4 tubes) (KPN: 0211786)
  • Includes: O-Ring 2-112 (x4); Adapter ¼ to 3/8 (x1); Permeate Tee Connector (x4); Permeate Elbow Connector (x4); PE tubing
• 8 Permeate Tee Connector (KPN: 0211803)
• 9 Permeate Elbow Connector (KPN: 0211804)
• 10 Interconnector Kit, CPVC (KPN: 0230091)
  • Includes: CPVC interconnector (x1); PVC Nut Holding (x2); Snap-Ring (x2)

Membrane Incompatibility

Prior to exposing the membrane to any chemical, the chemical should be reviewed by Koch Membrane Systems. Aside from the listed chemicals below, synthetic coolants, semi-synthetic coolants, kerosenes, naphtha, gasoline, floc polymers may affect membrane performance.

Chemicals that should be avoided include the following:

• Aprotic Solvent (e.g., Dimethyl Formamide, Dimethyl Acetamide, N-Methyl Pyrolidine, etc.)
• Chlorinated Solvents (e.g., Methylene Chloride, Chloroform, Carbon Tetrachloride, etc.)
• Ketones (e.g., Acetone, Diacetone Alcohol, etc.)
• Silicones or Silicone based Defoamers (e.g., Siloxane)

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet