Datasheet summary
Targa 8072-367-43-PM10 Hollow Fiber
Engineering summary from PDF text extraction for Targa 8072-367-43-PM10 Hollow Fiber. Verify every value with the OEM datasheet.
Summary
Product identification
Koch Membrane Systems (KMS) TARGA™ PM10 Hollow Fiber Cartridges are 8-inch industrial water ultrafiltration cartridges.
- Model: TARGA™ 8072-367-43-PM10
- Part Number: 0720415
- Membrane Chemistry: Proprietary semi-permeable polysulfone
- Membrane Type: PM10
- Nominal MWCO: 10,000
- Housing Shell/End Caps: Proprietary polysulfone
- Fiber Support Netting: Polypropylene/Polyethylene
- Permeate Collection Tube: PVC
- Potting Material: Proprietary epoxy compound
- Preservative: Glycerin
- Regulatory Status: Classified by UL to NSF/ANSI Standard 61 and in accordance with NSF/ANSI Standard 372
Operating limits
- Maximum Pressure (water): 45 psi (3.0 bar) @ 104º F (40º C) or less
- Temperature Range: 32º F (0º C) - 104º F (40º C)
- Maximum Production Transmembrane Pressure: 30 psi (2.1 bar)
- Maximum Backflush Transmembrane Pressure: 20 psi (1.4 bar)
- Maximum Total Chlorine @ 77º F (25º C) or lower: 200 ppm @ pH 9.5 or higher during backflush
- Maximum Total Chlorine Contact: 200,000 ppm-hrs cumulative
Product water
- Production Range: 11.0 (2.5 m³/hr) - 23.4 gpm (5.3 m³/hr)
- Higher production can be expected for post IX/RO polishing applications.
Mechanical / hydraulic
- Fiber Diameter (ID): 0.043 inch (1.1 mm)
- Membrane Area: 367 ft² (34.1 m²)
- Dimensions:
- D (Diameter): 8.4 inches (213 mm)
- L (Length): 72 inches (1829 mm)
Cartridge Storage Conditions
New cartridges are impregnated with glycerin and should be stored:
- Indoors, out of direct sunlight.
- At temperatures between 50 – 85 °F (10 – 30 °C).
- At relative humidity below 70%.
- In a horizontal position.
Used cartridges should be cleaned, rinsed, and impregnated before storage with one of the following solutions:
- Glycerin @ 80 – 100% (best)
- Phosphoric acid @ pH 2 – 3
- Benzoic acid or sodium benzoate @ 1,000 ppm
- Sodium bisulfite or sodium metabisulfite @ 1,000 – 5,000 ppm
Cartridges stored in sodium bisulfite or sodium metabisulfite should be flushed with clean water and impregnated with fresh solution at six-month intervals.
Cartridge Assembly and Components
| Item | Description | KMS Part Number |
|---|---|---|
| 1 | 8” HF Cartridge | See first page |
| 2 | Leveling Hardware (Screw ½ ” X 13) | 1002443 |
| 3 | Leveling Hardware (Nut ½ “ X 13) | 1002443 |
| 4 | 8” Coupling Set (gasket included) | 0151303 |
| 5 | O-Ring, Permeate Adapter | 0211022 |
| 6 | Permeate Adapter | 1002655 |
| 7 | 2½” Coupling Set (gasket included) | 0151304 / 0151261 |
| 8 | End Cap | 0040213 |
- Kit Process Pass for 8” cartridge: KMS Part Number: 0220158
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data should always match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.