Datasheet summary
Targa II 10048-35 Hollow Fiber
Engineering summary from PDF text extraction for Targa II 10048-35 Hollow Fiber. Verify every value with the OEM datasheet.
Summary
Product identification
The TARGA® II Hollow Fiber Cartridges are 10-inch water ultrafiltration cartridges.
- Membrane Chemistry: Proprietary Semi-Permeable Polyethersulfone
- Molecular Weight Cutoff: 100,000
- Housing Shell: PVC
- Fiber Support Netting: Polypropylene/Polyethylene
- Permeate Collection Tube: PVC
- Potting Material: Proprietary Compound
- Membrane Construction: Hollow Fiber
- Storage Solution: Glycerin/Water
- Regulatory Status: Classified by UL to NSF/ANSI Standard 61 and in accordance with NSF/ANSI Standard 372
Product specifications
| Part Number | Model | Fiber Diameter [inch (mm)] | Membrane Area [ft² (m²)] | Typical Production Range [gpm (m³/hr)] |
|---|---|---|---|---|
| 0720708 | TARGA II 10048-35 | 0.035 (0.9) | 554 (51.5) | 15.4 - 32.2 (3.5 - 7.4) |
| 0720709 | TARGA II 10072-35 | 0.035 (0.9) | 871 (80.9) | 24.2 - 51.4 (5.5 - 11.6) |
Operating limits
- Maximum Pressure (water): 45 psi (3.0 bar) @ 104°F (40°C) or less
- Temperature Range: 32°F (0°C) - 104°F (40°C)
- Maximum Production Transmembrane Pressure: 30 psi (2.1 bar)
- Maximum Backflush Transmembrane Pressure: 25 psi (1.7 bar)
- Allowable pH Range: 1.5 - 13
- Maximum Total Chlorine @ 77°F (25°C) or lower: 500 ppm @ pH >10
- Typical Cleaning Total Chlorine @ 77°F (25°C) or lower: 200 ppm @ pH >10
- Maximum Backflush Total Chlorine @ 77°F (25°C) or lower: 50 ppm @ pH >9
Mechanical / hydraulic
Nominal Dimensions
| Model | Fiber Diameter (ID) [Inches (mm)] | D [Inches (mm)] | L [Inches (mm)] |
|---|---|---|---|
| TARGA II 10048-35 | 0.035 inch (0.9 mm) | 10.75 (273) | 48 (1219) |
| TARGA II 10072-35 | 0.035 inch (0.9 mm) | 10.75 (273) | 72 (1829) |
Dimensions are provided for reference only and should not be interpreted as accurate specifications.
Components
The following components are required for cartridge assembly:
| Item | Description | Required for Single Permeate Removal | Required for Dual Permeate Removal |
|---|---|---|---|
| 1 | 10” HF Cartridge | 1 each | 1 each |
| 2 | 10” HF SS Coupling | 2 each | 2 each |
| 3 | 10” HF Face Seal | 2 each | 2 each |
| 4 | 10” HF K-Ring | 2 each | 2 each |
| 5 | Permeate O-rings | 4 each | 4 each |
| 6 | 10” Plastic HF End Cap W Port | 1 each | 2 each |
| 7 | 10” Plastic HF End Cap W/O Port | 1 each | 0 each |
| 8 | 10” HF End Cartridge Support | 2 each | 2 each |
| 9 | 10” HF Cartridge Support Hardware | 2 each | 2 each |
| 10 | 2” Groove-End Coupling | 3 each | 4 each |
Storage
New Cartridge Storage Conditions: New cartridges are packaged in a glycerin/water solution. Prior to installation, cartridges should be stored in their original packaging under the following conditions:
- Indoors, out of direct sunlight.
- Temperatures between 50–85°F (10–30°C).
- Relative humidity below 70%.
- In a horizontal position. It is recommended to use new cartridges within one year of shipment.
Used Cartridge Storage Conditions: Used cartridges should be cleaned, rinsed, and impregnated before storage with one of the following solutions:
- Glycerin @ 80–100%
- Phosphoric acid @ pH 2–3
- Benzoic acid or sodium benzoate @ 1,000 ppm
- Sodium bisulfite or sodium metabisulfite @ 1,000–5,000 ppm Cartridges stored in sodium bisulfite or sodium metabisulfite require flushing with clean water and impregnation with fresh solution at six-month intervals. Once impregnated, cartridges should be left on the system with all valves closed or removed and sealed in plastic bags. Storage conditions for used cartridges are the same as for new cartridges.
Disclaimer: This summary is based on text extracted from a PDF datasheet. It may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.