Datasheet summary
EY UV 200
Engineering summary from PDF text extraction for EY UV 200. Verify every value with the OEM datasheet.
Summary
Product identification
The SPIRA-CEL® EY E-Coat UV200 Series of spiral wound elements features a fiberglass outer wrap, offering an optimum surface-area-to-volume-ratio. The feed channel height can be varied by the thickness of the spacer material (from 30 to 80 mil) to adapt to different levels of solids content in the liquid. This design promotes excellent hydrodynamics with low energy demand.
Membrane Characteristics
- Membrane: NADIR® UV200
- Nominal M.W.C.O: 200,000 Da
Design Information
All models on this sheet feature a fiberglass outer wrap, diamond-shaped feed spacers, and one brine seal. Anti-telescoping devices (ATDs) are attached to the ends of the element by default, but can be provided loose in the box upon request.
| Model | Membrane Area m² (ft²) | Feed Spacer Thickness (mil) |
|---|---|---|
| SPIRA-CEL® EY UV200 4020B | 3.5 (38) | 31 |
| SPIRA-CEL® EY UV200 4020C | 3.0 (32) | 46 |
| SPIRA-CEL® EY UV200 4026B | 4.9 (53) | 31 |
| SPIRA-CEL® EY UV200 4026C | 3.9 (42) | 46 |
| SPIRA-CEL® EY UV200 4040B | 7.5 (81) | 31 |
| SPIRA-CEL® EY UV200 4040C | 6.0 (65) | 46 |
| SPIRA-CEL® EY UV200 7640B | 27.0 (291) | 31 |
| SPIRA-CEL® EY UV200 8040B | 32.0 (344) | 31 |
| SPIRA-CEL® EY UV200 8040C | 25.0 (269) | 46 |
| SPIRA-CEL® EY UV200 8040B (USA) | 32.0 (344) | 31 |
| SPIRA-CEL® EY UV200 8040C (USA) | 25.0 (269) | 46 |
Operating Limits
- Maximum Operating Pressure: 10 bar (145 psi)
- Maximum Cleaning Pressure: 3 bar (44 psi)
- Maximum Operating Temperature: 50°C (122°F)
- Operating pH Range: 2.5 – 11.0
- Maximum Pressure Drop: 2.1 bar (30 psi)
- Maximum Cleaning Concentrations: 20% butyl glycol; 10% acetic/lactic acid
- Note: Typical cleaning concentrations are 5% butyl glycol, or 3% acetic acid or lactic acid.
Physical Dimensions
Dimension "C" refers to the Inner Diameter. Element shipping weight is dependent on packaging material and quantity.
| Model | Element Weight kg (lb) | Dim. A mm (inches) | Dim. B mm (inches) | Dim. C mm (inches) | Permeate Tube |
|---|---|---|---|---|---|
| SPIRA-CEL® EY UV200 4020B | 2 (4) | 508 (20.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® EY UV200 4020C | 2 (4) | 508 (20.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® EY UV200 4026B | 4 (9) | 667 (26.3) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® EY UV200 4026C | 4 (9) | 667 (26.3) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® EY UV200 4040B | 4 (9) | 1,016 (40.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® EY UV200 4040C | 4 (9) | 1,016 (40.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® EY UV200 7640B | 16 (36) | 1,016 (40.0) | 185.0 (7.3) | 32.7 (1.29) | Female |
| SPIRA-CEL® EY UV200 8040B | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 30.15 (1.187) | Female |
| SPIRA-CEL® EY UV200 8040C | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 30.15 (1.187) | Female |
| SPIRA-CEL® EY UV200 8040B (USA) | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 28.9 (1.138) | Female |
| SPIRA-CEL® EY UV200 8040C (USA) | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 28.9 (1.138) | Female |
Important Information
- Start-up: MANN+HUMMEL Water & Fluid Solutions recommends flushing elements for 30 minutes at low pressure and discarding permeate during this flush prior to operation. Refer to the "Element Start-Up Guide – System Start-Up (TSG-O-005)" for detailed procedures.
- Cleaning: TRISEP® membrane elements require periodic cleaning to ensure proper operation and prevent membrane damage. Consult the "Membrane Cleaning Guides" for instructions.
- Storage: TRISEP membrane elements must be stored appropriately to ensure proper operation and prevent membrane damage. Refer to the "Element Storage Guides (TSG-O-009 & TSG-O-010)".
Customization
MANN+HUMMEL Water & Fluid Solutions offers a full range of membranes and element designs for challenging water and process applications, including low-fouling RO, submerged UF, continuous high temperature, ultra-high pressure, and unique sanitary designs. Contact them for customized products.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.