MANN+HUMMEL Membranes and Water Treatment

Average Salt Rejection: 97.00% · Minimum Salt Rejection: 98.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

UA420-BT is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

Average Salt Rejection: 92.50% · Minimum Salt Rejection: 95.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The Mann + Hummel UA640 is a 4-inch CA RO element featuring a spiral-wound configuration and cellulose acetate blend membrane. It has an active membrane area of 80 ft².

Average Salt Rejection: 95.00 % · Minimum Salt Rejection: 92.50 % · Permeate Tube (C): 1.50 inches (38.1 mm)

This 8-inch spiral wound cellulose acetate blend RO membrane element has an active membrane area of 350 ft².

Permeate Port: 1” NTP · Filtrate Flow Range: 0.45 – 3.6 m³/h (1.9 – 15.8 gpm) · Maximum Backflush Flowrate: 7.2 m³/h (31.7 gpm)

The AQUADYN UA860-HP is a hollow fiber ultrafiltration (UF) module with a 0.025-micron pore size Polyacrylonitrile membrane, suitable for treating oily wastewaters.

Permeate Port: 2” Victaulic · Filtrate Flow Range: 0.65 – 7.2 m³/h (2.7 – 29.9 gpm) · Maximum Backflush Flowrate: 10.4 m³/h (43.2 gpm)

The AQUADYN UA1060-HP is a hollow fiber ultrafiltration module with a 0.025-micron pore size for treating oily wastewaters.

Permeate Port: 2” Victaulic · Max. Water Flow: 1.6 – 6.6 m³/h (7.3 – 29.1 gpm) · Maximum Backflush Flow: 13.2 m³/h (58.1 gpm)

The Mann + Hummel UE1060-HP is a hollow fiber ultrafiltration module utilizing a PES membrane with a 0.025-micron pore size.

Expected Diffuser Pressure Loss: 70 – 90 mbar (0.87 – 1.16 psi) · Material: Silicone

The Bio-Cel Diffuser is a silicone component designed for MBR systems in reverse osmosis and nanofiltration applications.

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Bio-Cel Easy+ is a submerged membrane module for reverse osmosis and nanofiltration applications.

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Bio-Cel+480 is a submerged membrane element for RO and NF applications, available in standard, flanged, or Victaulic configurations.

Dry Weight: 694 kg (1530 lbs) · Wet Weight without Solids: 1274 kg (2780 lbs)

The Bio-Cel+960H is a submerged membrane element designed for reverse osmosis and nanofiltration applications.

Dry Weight: 693 kg (1528 lb) · Wet Weight without Solids: 1273 kg (2806 lb)

The Bio-Cel+960V is a submerged reverse osmosis and nanofiltration membrane element designed for water treatment applications.

Dry Weight: 694 kg (1530 lbs) · Wet Weight without Solids: 1274 kg (2808 lbs)

The Mann + Hummel Bio-Cel+1920H is a submerged membrane element for reverse osmosis and nanofiltration applications.

Dry Weight: 694 kg (1530 lbs) · Wet Weight without Solids: 1274 kg (2780 lbs)

This is a Mann + Hummel Bio-Cel 2 Double membrane element for reverse osmosis and nanofiltration applications.

Average Salt Rejection: 99.50% · Minimum Salt Rejection: 98.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8" X-20 Low Fouling RO Element from Mann + Hummel, featuring an advanced composite membrane for low fouling applications. It boasts FoulGuard Technology.

Dry Weight: 150 kg (330 lbs) · Wet Weight without Solids: 200 kg (440 lbs)

The Bio-Cel M+100 is a submerged membrane element for reverse osmosis and nanofiltration applications.

Dry Weight: 250 kg (551 lbs) · Wet Weight without Solids: 365 kg (805 lbs)

The Bio-Cel M+200 is a submerged membrane element designed for reverse osmosis and nanofiltration applications.

Minimum Feed Flowrate: 4.5 m³/hr (20 gal/min) · Maximum Feed Flowrate: 11.4 m³/hr (50 gal/min) · Maximum Feed Pressure: 5.5 bar (80 psi)

The FS1/FS3 1" Tubular Modules are compact and lightweight tubular membrane elements designed for filtering solutions with high levels of suspended solids.

Connection for Permeate: Hose nozzle Ø 10 mm · Free Flow Area: 1.0 cm² (0.15 in²) · Feed Flow Rate at Axial Velocity of 1 m/s: 360 l/h (1.6 GPM)

This is a Mann + Hummel MICRODYN MD 020 CP 2N capillary microfiltration module featuring a highly porous polypropylene membrane with a nominal pore size of 0.

Connection for Permeate: Hose nozzle Ø 10 mm · Free Flow Area: 0.7 cm² (0.1 in²) · Feed Flow Rate at Axial Velocity of 1 m/s: 250 l/h (1.1 GPM)

The MD 020 FP 2N is a capillary microfiltration module designed for separating suspended particles using a polypropylene membrane. It features a 0.

Retention / pore size: 0.2 micron · Connection for Permeate: Screw connection R1¼’’, DIN 2999 · Free Flow Area: 5.0 cm² (0.8 in²)

This is a MICRODYN MD 063 CP 2N capillary microfiltration module utilizing a 0.2 micron polypropylene membrane for separation of suspended particles.

Connection for Permeate: Backing Flange DN 50, DIN 2501 · Free Flow Area: 46 cm² (7.1 in²) · Feed Flow Rate at Axial Velocity of 1 m/s: 16,400 l/h (72 GPM)

The MICRODYN MD 150 CP 2N is a capillary microfiltration module featuring a highly porous polypropylene membrane for separating suspended particles. This module has a 0.

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Mann + Hummel MD 150 CS 2N is a reverse osmosis and nanofiltration membrane element.

Connection for Permeate: Cone flange R 1 ½” · Free Flow Area: 46 cm² (7.1 in²) · Feed Flow Rate at Axial Velocity of 1 m/s: 16,400 l/h (72 GPM)

This MICRODYN MD 150 CU 2M is a capillary microfiltration module designed for separating suspended particles and emulsified liquids.

Connection for Permeate: Cone flange R 1 ½” · Free Flow Area: 46 cm² (7.1 in²) · Feed Flow Rate at Axial Velocity of 1 m/s: 16,400 l/h (72 GPM)

The MD 150 CU 2N CC is a capillary microfiltration module utilizing a symmetrical polypropylene membrane for suspended particle separation.

Connection for Permeate: Clamp connection Ø 67 mm · Free Flow Area: 61.1 cm² (9.5 in²) · Feed Flow Rate at Axial Velocity of 1 m/s: 22,000 l/h (97 GPM) (Applicable at < 20 °C (68 °F))

The MICRODYN MD 200 CV 2N is a capillary microfiltration module designed for separating suspended particles or emulsified liquids.

Retention / pore size: 0.05 micron · Nominal Pore Size: 0.05 µm · pH Range: 0.0 – 14.0

The MP005 P is a polyethersulfone (PES) microfiltration membrane sheet with a nominal pore size of 0.05 micron, suitable for removing macromolecules.

Pore Size: 0.2 micron · Nominal Pore Size: 0.2 µm · pH Range: 1.0 – 12.0

The NADIR® MV020 T is a high-flux polyvinylidene fluoride (PVDF) microfiltration membrane designed for removing macromolecules and concentrating organic solutes.

Na₂SO₄ Rejection Bounds: 77 - 95% (Test conditions: 5,000 ppm Na₂SO₄, 40 bar (580 psi), 20°C (68°F)) · pH Range: 0.0 - 14.0 · Backing Material: Polypropylene

The NADIR® NP030 is a polyethersulfone nanofiltration membrane element with a molecular weight cut-off of 500-600 Daltons.

pH Range: 0.0 – 14.0 · Chlorine Tolerance (sanitization): 200 ppm at pH ≥ 10.5 · Backing Material: Polypropylene

The NADIR UH004 P is a hydrophilic polyethersulfone ultrafiltration membrane with a 4,000 Dalton molecular weight cut-off, suitable for food, dairy.

pH Range: 0.0 – 14.0 · Backing Material: Polypropylene

The NADIR UH030 P is a hydrophilic polyethersulfone Ultrafiltration flat sheet membrane with a nominal molecular weight cut-off of 30,000 Daltons.

pH Range: 0.0 – 14.0 · Chlorine Tolerance: 200 ppm (sanitization) at pH ≥ 10.5 · Backing Material: Polypropylene

The NADIR UH050P is a hydrophilic polyethersulfone (PES) flat sheet ultrafiltration membrane with a 50,000 Dalton molecular weight cut-off.

pH Range: 0.0 – 14.0 · Chlorine Tolerance (sanitization): 200 ppm at pH ≥ 10.5 · Backing Material: Polypropylene

The NADIR® UP005 P is a polyethersulfone flat sheet ultrafiltration membrane with a nominal molecular weight cut-off of 5,000 Daltons.

Maximum Cleaning Temperature (daily short term): 50°C (125°F) for 30 minutes · pH Range: 0.0 – 14.0 · Chlorine Tolerance: 200 ppm (sanitization) at pH ≥ 10.5 (for daily short-term cleaning)

The NADIR® UP010 P is a polyethersulfone ultrafiltration membrane with a 10,000 Dalton molecular weight cut off, suitable for food processing and water purification.

pH Range: 0.0 – 14.0 · Chlorine Tolerance: 200 ppm (sanitization) at pH ≥ 10.5 · Backing Material: Polypropylene

The NADIR® UP020P is a Polyethersulfone (PES) flat sheet ultrafiltration membrane with a 20,000 Dalton M.W.C.O.

pH Range: 1.0 – 12.0 · Backing Material: Non-Woven Polyester

The NADIR UV150 P is a polyvinylidene fluoride ultrafiltration membrane with a 150,000 Dalton molecular weight cut-off.

Daily Short Term Cleaning Temperature: maximum 50°C (125°F) for 30 min · pH Range: 1.0 – 12.0 · Chlorine Tolerance (sanitization): 200 ppm at pH ≥ 10.5

The TRISEP 10k UF is a polyethersulfone (PES) ultrafiltration membrane with a nominal molecular weight cut-off of 10,000 Dalton.

Stabilized Salt Rejection: 99.5% · Minimum Salt Rejection: 99.0% · Pressure: 15.5 bar (225 psi)

The ACM1 is a versatile, high-rejection reverse osmosis flat sheet membrane suitable for various water purification applications.

Stabilized Salt Rejection: 98.0% · Minimum Salt Rejection: 97.0% · Flux Range: 52.6 – 78.1 LMH (31.0 – 46.0 GFD)ᵃ

The TRISEP ACMX is an ultra-low energy reverse osmosis (RO) flat sheet membrane available in dry or wet rolls, suitable for FDA compliant applications.

Test Conditions (for flux range): 2,000 ppm NaCl, 4.8 bar (70 psi), 25°C (77°F), 15% recovery, pH 5.5, 30 minutes operation · Nominal Operating pH Range: 5.5 · Cleaning pH Range: 2.0 – 7.5

The Mann + Hummel SBNF is a cellulose acetate nanofiltration membrane designed for color and TOC reduction in high organic matter streams.

Typical NaCl rejection: 10% · Stabilized MgSO₄ Rejection: 80.0% (Bounds: 70.0 – 90.0%) · Pore Size Distribution: In the range of 1,000 Daltons

The TRISEP® UA60 is a piperazine-based thin-film composite nanofiltration membrane designed for separation and purification.

Maximum Cleaning Temperature (daily short term): 50°C (122°F), 30 min · pH Range: 1.0 – 12.0 · Chlorine Tolerance (sanitization): 200 ppm at pH ≥ 10.5

The TRISEP® UE50 is a polyethersulfone ultrafiltration membrane for macromolecule removal and organic solute concentration.

Cleaning Temperature: Maximum 50°C (122°F) for 30 minutes (daily short-term cleaning) · pH Range: 1.0 – 12.0 · Chlorine Tolerance: 200 ppm (for sanitization) at pH ≥ 10.5

The TRISEP® UF5 is a Polyethersulfone (PES) ultrafiltration membrane with a 5,000 Dalton molecular weight cut-off.

pH Range: 1.0 – 12.0 · Chlorine Tolerance: 200 ppm (sanitization) at pH ≥ 10.5 · Backing Material: Non-Woven Polyester

The TRISEP® UF10 is a 10,000 Dalton polyethersulfone ultrafiltration membrane used in food processing, dialysis water purification, and industrial water treatment.

Stabilized Salt Rejection: 99.5% · Minimum Salt Rejection: 99.0% · Flux Range: 47.6 – 71.4 LMH (28.0 – 42.0 GFD)

The TRISEP® X-20™ is a low-fouling reverse osmosis flat sheet membrane designed for wastewater and other high-fouling applications.

Stabilized MgSO₄ Rejection: 96.0% (Bounds: 94.0 – 98.0%) · Typical NaCl rejection: 20% · Flux Range: 47.6 – 73.1 LMH (28.0 – 43.0 GFD)

The XN45 is a piperazine-based, high-flow nanofiltration membrane element designed for low-pressure water purification.

Stabilized Salt Rejection: 99.5% · Minimum Salt Rejection: 99.0% · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

This is a high rejection brackish water reverse osmosis element certified for drinking water systems.

Maximum Operating Pressure: 41 bar (600 psi) · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45°C (113°F)

The Mann + Hummel RO FR series are fouling-resistant brackish water reverse osmosis membrane elements with a Thin-Film Composite Polyamide membrane chemistry and...

Stabilized Salt Rejection (%): 99.5 · Minimum Salt Rejection (%): 99.3 · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

The Mann + Hummel RO HRLE series are high-rejection, low-energy brackish water reverse osmosis membrane elements utilizing Thin-Film Composite Polyamide chemistry.

Stabilized Salt Rejection: 99.3% · Minimum Salt Rejection: 98.8% · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

The MICRODYN RO LE series consists of low-energy brackish water reverse osmosis elements with a thin-film composite polyamide membrane for reduced energy consumption in...

Permeate Tube (Male elements only): A protruding permeate tube has a dimension "D" of 26.7 mm (1.05 in) · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45°C (113°F)

The Mann + Hummel RO SWH series are high rejection seawater reverse osmosis elements designed for high salinity water purification.

Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45°C (113°F) · Cleaning pH Range¹: 1.0 – 12.0

The RO SWL series are high productivity seawater reverse osmosis spiral-wound membrane elements designed for high salinity water purification.

Stabilized Salt Rejection: 99.70 % · Minimum Salt Rejection: 99.6 % · Permeate Flow: 28 m³/day (7,500 GPD)

The Mann + Hummel RO SWM series are high-rejection seawater RO elements for desalination.

Stabilized Salt Rejection: 98.8% · Minimum Salt Rejection: 98.0% · Standard test conditions for permeate flow: 1,500 ppm NaCl, 10.3 bar (150 psi), 25°C (77°F), 15% recovery, pH 8.0, 30 minutes operation. Flow rates will be no more than 15% below the values shown

The Mann + Hummel RO ULE is a low-energy reverse osmosis membrane element designed for water purification applications requiring reduced energy consumption.

Stabilized Salt Rejection: 99.2% · Minimum Salt Rejection: 99.0% · Maximum Operating Temperature: 45°C (113°F)

The MICRODYN RO XLE series consists of ultra-low energy reverse osmosis membrane elements designed for water purification applications where reduced energy consumption is...

Stabilized Salt Rejection: 99.65% · Minimum Salt Rejection: 99.40% · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

The MICRODYN RO XRLE series are high rejection, low energy brackish water reverse osmosis elements with a thin-film composite polyamide membrane chemistry.

Stabilized MgSO₄ Rejection: > 97% · Stabilized NaCl Rejection: 45 – 55% · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

The MICRODYN NF7 is a nanofiltration membrane element designed for water purification, featuring selective rejection of ions.

Stabilized MgSO₄ Rejection: > 97% · Stabilized NaCl Rejection: 89 – 95% · Maximum Operating Temperature: 45°C (113°F)

The MICRODYN NF9 is a series of high-rejection nanofiltration elements available in 4-inch and 8-inch spiral-wound configurations for water purification.

Permeate Flow (m³/day (gpd)): 4.9 (1300) · Maximum Feed Flow (m³/h (gpm)): 3 (13) · Membrane Area (m² (ft²)): 2.9 (31)

These 4.6-inch Oltremare series RO elements are designed for water purification and are available as wet or dry products.

Permeate Flow m³/day (gpd): 13.6 (3600) · Maximum Feed Flow m³/h (gpm): 4.1 (18) · Membrane Area m² (ft²): 11.2 (120)

The 4641 series are Oltremare brackish water reverse osmosis (RO) elements designed for water purification, available as wet or dry products.

Stabilized Salt Rejection: 99.5% · Minimum Salt Rejection: 99.2% · Maximum Operating Pressure: 41 bar (600 psi)

The Oltremare BR series comprises high rejection brackish water RO spiral-wound membrane elements available in standard 8" designs.

Stabilized Salt Rejection: 99.4% (for models 2514 to 4021) - 99.5% (for model 4040) · Minimum Salt Rejection: 98.0% (for models 2514 to 4021) – 99.2% (for model 4040) · Maximum Operating Pressure: 41 bar (600 psi) for fiberglassed, 20.7 bar (300 psi) for tape wrapped (models from 2514 to 4040 can be both fiberglassed and tape wrapped)

The Oltremare BR series are high-rejection polyamide brackish water RO elements ideal for water purification applications. These elements are available in standard 2.5".

Maximum Operating Pressure: 41 bar (600 psi) · Maximum Pressure Drop: 0.7 bar (10 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45 °C (113 °F) / 35 °C (95 °F) @pH>10

The Mann + Hummel Oltremare SAL series are extra low energy brackish water RO elements designed for high productivity and heat sanitizability.

Stabilized Salt Rejection: 99%(b) - 99.3%(c) · Minimum Salt Rejection: 98%(b) – 99.0%(c) · Permeate Flow m³/day (gpd)(a): 0.7 (185)

The Oltremare Compact LOW1 is a low-energy, high-rejection brackish water reverse osmosis membrane element with a plug-and-play design.

Permeate Flow m³/day (gpd): 0.5 (120) · Maximum Feed Flow m³/h (gpm): 1.38 (6) · Membrane Area m² (ft²): 0.6 (6)

The Oltremare Compact LOW2 series consists of low-energy, high-rejection brackish water Reverse Osmosis membrane elements. Available in various sizes.

Permeate Flow m³/day (gpd): 0.76 (2005) · Maximum Feed Flow m³/h (gpm): 1.38 (6) · Membrane Area m² (ft²): 0.6 (6)

Compact Low 3 is a water-treatment membrane element to compare by feed type, target water quality, membrane area, and operating pressure.

Stabilized Salt Rejection: 99–99.2% · Minimum Salt Rejection: 98–99.0% · Permeate Flow m³/day (gpd): 0.57 (150)

The Mann + Hummel Oltremare Compact LOW4 is a low-energy, high-productivity brackish water reverse osmosis membrane element.

Permeate Flow m³/day (gpd): 2.5 (650) · Maximum Feed Flow m³/h (gpm): 1.38 (6) · Membrane Area m² (ft²): 2.6 (28)

The Oltremare FOUL1-2540 is a polyamide RO membrane element designed for difficult brackish water applications. This element offers a stabilized salt rejection of 99.

Stabilized Salt Rejection: 99.5% · Minimum Salt Rejection: 99.0% · Permeate Flow m³/day (gpd): 40 (10500)

The Mann + Hummel Oltremare FOUL1-8040 is a high-rejection, low-fouling polyamide RO membrane element designed for challenging feedwaters.

Stabilized Salt Rejection (%): 99.4 (for modules from 2514 to 4021) - 99.5 (for module 4040) · Minimum Salt Rejection (%): 98.0 (for modules from 2514 to 4021) – 99.2 (for module 4040) · Permeate Flow m³/day (gpd): 0.7 (185)

The Oltremare LOW1 series are low energy, high rejection brackish water RO elements suitable for various applications.

Stabilized Salt Rejection: 99.4% (for modules 4014XL and 4021XL) - 99.5% (for module 4040XL) · Minimum Salt Rejection: 98.0% (for modules 4014XL and 4021XL) – 99.2% (for module 4040XL) · Maximum Operating Pressure: 20.7 bar (300 psi)

The Oltremare LOW1 XL series are extra-area, low-energy brackish water reverse osmosis elements with polyamide membranes. They offer stabilized salt rejection up to 99.

Stabilized Salt Rejection: 99.3% (a) · Minimum Salt Rejection: 99% (a) · Permeate Flow m³/day (gpd): 45.4 (12000)

The Mann + Hummel Oltremare LOW1 8040 is a low-energy, high-rejection brackish water reverse osmosis membrane element. It features a polyamide.

Permeate Flow m³/day (gpd): 0.5 (120) · Maximum Feed Flow m³/h (gpm): 1.38 (6) · Membrane Area m² (ft²): 0.6 (6)

The Mann + Hummel Oltremare LOW2 series are low energy, very high rejection brackish water Reverse Osmosis elements. These elements are available in standard 2.5”, 4”.

Permeate Tube Outer Diameter (Dim. C): 19.1 mm (0.75 inches) · Maximum Operating Pressure: 20.7 bar (300 psi) · Maximum Pressure Drop: 0.7 bar (10 psi) per element; 4 bar (60 psi) per housing

The Mann + Hummel LOW2 XL is an extra-area, low-energy reverse osmosis membrane element designed for brackish water applications. Available in various sizes.

Maximum Feed Flow: 17 m³/h (75 gpm) · Maximum Operating Pressure: 41 bar (600 psi) for fiberglassed elements · Maximum Pressure Drop: 0.7 bar (10 psi) per element; 4 bar (60 psi) per housing

The Oltremare LOW2 is a low energy, high rejection brackish water Reverse Osmosis membrane designed for producing high-quality water.

Stabilized Salt Rejection: 98.5%(b) – 98.8%(c) · Minimum Salt Rejection: 97.0%(b) – 98.0%(c) · Membrne Area: 2.6 m² (28 ft²)

The Oltremare LOW3 series are low energy, high-productivity brackish water reverse osmosis membrane elements available in standard 2.

Maximum Operating Pressure: 20.7 bar (300 psi) · Maximum Pressure Drop: 0.7 bar (10 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45 °C (113 °F)

The Low 3 XL series are polyamide Reverse Osmosis membrane elements designed for brackish water applications, offering extra membrane area and low energy consumption.

Permeate Flow m³/day (gpd): 0.57 (150) · Maximum Feed Flow m³/h (gpm): 1.38 (6) · Membrane Area m² (ft²): 0.6 (6)

The Oltremare LOW4 series consists of extra low energy, high productivity reverse osmosis membrane elements designed for brackish water applications.

Maximum Operating Pressure: 20.7 bar (300 psi) · Maximum Pressure Drop: 0.7 bar (10 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45 °C (113 °F)

The LOW4 XL series comprises brackish water reverse osmosis (RO) elements designed for extra area, extra low energy consumption, and excellent productivity.

Stabilized Salt Rejection: 99.2% · Minimum Salt Rejection: 99.0% · Permeate Flow m³/day (gpd): 45.4 (12000)

The Oltremare LOW4 series are extra low-energy, brackish water reverse osmosis membrane elements designed for producing drinking and industrial water.

Permeate Tube: Male · Maximum Operating Temperature: 45 °C (113 °F) · Cleaning pH Range: 1.0 – 12.0

This Mann + Hummel Nano 7 is an ultra-low energy, ion-selective nanofiltration element featuring a Polyamide NF membrane.

Maximum Feed Flow: 17 m³/h (75 gpm) · Membrane Area: 37.2 m² (400 ft²) · Maximum Operating Pressure: 41 bar (600 psi)

The Mann + Hummel Nano 7 8040 is an ultra-low energy nanofiltration membrane element designed for high TOC and organic removal with partial softening.

Permeate Flow m³/day (gpd): 2.6 (680) (MgSO₄ test) – 3.2 (850) (NaCl test) · Maximum Feed Flow m³/h (gpm): 1.38 (6) · Membrane Area m² (ft²): 2.6 (28)

This is an ultra-low energy nanofiltration element designed for high productivity removal of salts, nitrates, and pesticides.

Maximum Feed Flow: 17 m³/h (75 gpm) · Membrane Area: 37.2 m² (400 ft²) · Maximum Operating Pressure: 41 bar (600 psi)

The Mann + Hummel Nano 9 8040 is an ultra-low energy nanofiltration element designed for high salt and hardness rejection.

Stabilized Salt Rejection: 99.4% · Minimum Salt Rejection: 99.2% · Permeate Flow m³/day (gpd): 1.0 (275)

The SEA2 is a high rejection seawater reverse osmosis element designed for high flow rates and energy savings.

Stabilized Salt Rejection: 99.6% · Minimum Salt Rejection: 99.4% · Maximum Operating Pressure: 82 bar (1200 psi)

The Oltremare SEA5 is a high rejection, excellent productivity seawater reverse osmosis membrane element.

Permeate connection: 2 x 1’’ Victaulic · Volume flow: 15 – 45 m³/h · Cross flow velocity: 2 – 6 m/s

This Mann + Hummel ProCEM MCE 1200-25-019-030 is a ceramic membrane element for reverse osmosis and nanofiltration applications.

Permeate connection: 2 x 1’’ Victaulic · Volume flow: 15 – 45 m³/h · Cross flow velocity: 2 – 6 m/s

This is a Mann + Hummel ProCEM ceramic membrane element for reverse osmosis and nanofiltration applications.

Permeate connection: 2 x 1’’ Victaulic · Volume flow: 15 -- 45 m³/h · Cross flow velocity: 2 -- 6 m/s

This is a ProCEM MCE ceramic membrane element with an alumina support and coating, designed for reverse osmosis and nanofiltration applications.

Permeate connection: 2 x 1’’ Victaulic · Volume flow: 18 – 55 m³/h · Cross flow velocity: 2 – 6 m/s

This is a Mann + Hummel ProCEM MCE ceramic membrane element designed for reverse osmosis and nanofiltration applications. It features a 0.

Retention / pore size: 50 nm · Permeate connection: 2 x 1’’ Victaulic · Volume flow: 18 -- 55 m³/h

This ProCEM MCE 1200-41-037-050 is a ceramic membrane element with a 50 nm pore size for RO and NF applications. It features an alumina support and coating.

Permeate connection: 2 x 1’’ Victaulic · Volume flow: 18 -- 55 m³/h · Cross flow velocity: 2 -- 6 m/s

This ProCEM MCE 1200-41-037-080 is a ceramic membrane element designed for reverse osmosis and nanofiltration applications. It features an Al₂O₃ support and coating, a 0.

Retention / pore size: 1.0 micron · Length: 750 mm (29.5 inches) · Diameter: 25 mm (1.0 inches)

This Mann + Hummel SE 020 TP 1N is a tubular crossflow microfiltration module designed for separating suspended solids larger than 1.0 micron.

Retention / pore size: 1.0 micron · Membrane inner diameter: 5.5 mm · Length: 1,396 ± 2 mm (55 ± 0.1 inches)

This Mann + Hummel SEPRODYN® SE 090TO 1M is a crossflow microfiltration module designed to separate suspended solids larger than 1.0 micron.

Retention / pore size: 1.0 micron · Connection for Permeate: Back · Length: 1,400 ± 3 mm (55.1 ± 0.1 inches)

This is a crossflow microfiltration unit designed to separate suspended solids larger than 1.0 micron. It features a 1,400 mm long.

Retention / pore size: 1.0 micron · Connection for PermeateBack: (information appears incomplete in source text) · Length: 1,400 ± 3 mm (55.1 ± 0.1 inches)

The SEPRODYN® SE 090TP1M/FF/D is a crossflow microfiltration module designed to separate suspended solids larger than 1.0 micron. It features self-supporting.

Retention / pore size: 1.0 micron · Connection for Permeate: Back · Length: 3,000 ± 4 mm (118 ± 0.2 inches)

The SE 150 TP 1L ANSI is a crossflow microfiltration module designed to separate suspended solids larger than 1.0 micron.

Retention / pore size: 1.0 micron · Connection for Permeate: (Information incomplete in extract) · Membrane inner diameter: 5.5 mm

This is a SEPRODYN® SE 150 TP 1L DIN crossflow microfiltration module used for separating suspended solids larger than 1.0 micron. It features highly porous.

Retention / pore size: 1.0 micron · Connection for Permeate: Fla... (text cut off) · Membrane Inner Diameter: 5.5 mm

This SEPRODYN® SE 220 TP 1L DIN is a crossflow microfiltration module designed for separating suspended solids larger than 1.0 micron.

Membrane Area m² (ft²): 3.5 (38) · Permeate Tube: Female · Maximum Operating Pressure: 10 bar (145 psi)

The SPIRA-CEL® EY UV200 is a spiral wound membrane element designed for RO and NF applications.

Maximum Operating Pressure: 10 bar (145 psi) · Maximum Cleaning Pressure: 3 bar (44 psi) · Maximum Pressure Drop: 2.1 bar (30 psi)

The SPIRA-CEL® FY UV200 is a series of spiral-wound RO/NF membrane elements offering an optimum surface-area-to-volume ratio and low energy demand.

Maximum Operating Pressure: 40 bar (580 psi) · Maximum Operating Temperature: 80°C (176°F) · Operating pH Range: 3.0 – 14.0

The SPIRA-CEL® OX NP Series elements from Mann + Hummel are nanofiltration modules featuring NADIR® NP polyethersulfone membranes designed for high stability in demanding...

Membrane Area m² (ft²): 1.8 (19) · Permeate Tube: Male · Maximum Operating Pressure: 40 bar (580 psi)

The SPIRA-CEL® OY Industry NP Series modules utilize NADIR® NP polyethersulfone membranes for nanofiltration applications. These elements are designed with a hard shell.

Stabilized Salt Rejection: 99.5% · Minimum Salt Rejection: 99.0% · Permeate Flow m³/day (GPD)ᵃ: 2.5 (650)

The TRISEP® ACM2 series consists of high rejection polyamide brackish water reverse osmosis (RO) membrane elements, offering stabilized salt rejection up to 99.5%.

Stabilized Salt Rejection: 99.3% · Minimum Salt Rejection: 98.8% · Permeate Flow: 41.6 m³/day (11,000 GPD)

The TRISEP® ACM 3 is a low-energy brackish water reverse osmosis element designed for high solute rejection at moderate pressures.

Stabilized Salt Rejection: 99.3% · Minimum Salt Rejection: 98.8% · Maximum Operating Pressure: 41 bar (600 psi)

The Mann + Hummel ACM 4 series are low-energy brackish water RO elements with polyamide spiral-wound membranes designed for versatile purification and process...

Na₂SO₄ Salt Rejection: 77 – 95% · Membrane Area: 33.4 m² (360 ft²) · Maximum Operating Pressure: 83 bar (1,200 psi)

The TRISEP® HPR 8040-NP030-31-FG is an industrial high-pressure nanofiltration membrane element designed for challenging purification applications.

Membrane Area m² (ft²): 2.1 (23) · Permeate Tube: Male · Maximum Operating Pressure: 83 bar (1,200 psi)

The TRISEP® HPR series consists of high-pressure industrial membrane elements for demanding purification applications.

Nominal Pore Size: 0.05 µm · Membrane Area: 21.2 m² (228 ft²) · Maximum Operating Pressure: 10 bar (145 psi)

The TRISEP® PS MP005 Series consists of sanitary microfiltration membrane elements for pharmaceutical applications.

Na₂SO₄ Salt Rejection: 35 – 75 % · Permeate Tube: Female · Maximum Operating Pressure: 40 bar (580 psi)

The TRISEP® PS NP010 is a sanitary membrane element designed for pharmaceutical applications using a NADIR® NP010 polyethersulfone membrane.

Na₂SO₄ Salt Rejection: 77 – 95% · Membrane Area m² (ft²): 7.0 (75) · Permeate Tube: Female

The Mann + Hummel TRISEP® PS NP030 Series consists of sanitary nanofiltration membrane elements for pharmaceutical applications featuring NADIR® NP030 PES membrane.

Membrane Area m² (ft²): 7.0 (75) · Permeate Tube: Female · Maximum Operating Pressure: 10 bar (145 psi)

The TRISEP® PS UH004 Series elements are sanitary membranes designed for pharmaceutical applications.

Maximum Operating Pressure: 10 bar (145 psi) · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing · Permeate Tube: Female

The TRISEP® PS Pharmaceutical UP005 Series are reverse osmosis membrane elements designed for demanding pharmaceutical applications.

Membrane Area m² (ft²): 7.0 (75) · Permeate Tube: Female · Maximum Operating Pressure: 10 bar (145 psi)

The TRISEP PS UP010 Series are sanitary membrane elements designed for pharmaceutical applications, featuring a NADIR UP010 polyethersulfone membrane with a 10.

Maximum Operating Pressure: 41 bar (600 psi) · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 32°C (90°F)

The TRISEP SB20 is a high-rejection Cellulose Acetate reverse osmosis membrane element designed for water purification in systems using chlorine.

Stabilized Salt Rejection: 96.0% · Minimum Salt Rejection: 92.5% · Maximum Operating Pressure: 41 bar (600 psi)

The TRISEP® SB50 is a reverse osmosis membrane element with a Cellulose Acetate membrane offering good solute rejection, fouling resistance, and chlorine tolerance.

Stabilized Salt Rejection: 85.0% · Minimum Salt Rejection: 80.0 – 90.0% · Maximum Operating Pressure: 41 bar (600 psi)

The TRISEP® SB90 CA is a nanofiltration membrane element made from a cellulose acetate/triacetate blend for high-quality permeate production at lower pressures than RO...

Permeate flow tested under conditions: 2,000 ppm NaCl, 9.7 bar (140 psi), 25°C (77°F), 15% recovery, pH 5.5, 30 minutes operation. Flow rates will be no more than 15% below the values shown · Maximum Operating Pressure: 21 bar (300 psi) · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

The TRISEP® SBNF CA is a cellulose acetate nanofiltration membrane element designed for excellent color and TOC reduction at low pressure.

Maximum Operating Pressure: 21 bar (300 psi) · Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing · Maximum Operating Temperature: 45°C (113°F)

The TRISEP® UE50 PES is a polyethersulfone ultrafiltration element designed for macromolecule removal and solute concentration.

Maximum Operating Pressure: 21 bar (300 psi) · Maximum Operating Temperature: 45°C (113°F) · Cleaning pH Range: 1.0 – 12.0

The TRISEP® UF10 is a polyethersulfone ultrafiltration membrane element with a 10,000 Dalton molecular weight cut-off.

Membrane Area m² (ft²): 7.4 (80) · Permeate Tube: Male · Maximum Operating Pressure: 120 bar (1,740 psi)

The TRISEP® UPR series offers ultra-high pressure industrial membrane elements for demanding purification applications. These elements feature a fiberglass outer wrap.

Typical NaCl rejection: 20% · Stabilized MgSO₄ Rejection (%): 96.0 · MgSO₄ Rejection Bounds (%): 94.0 – 98.0

The XN45 is a high-flow nanofiltration (NF) membrane element using a piperazine membrane for versatile process streams and low-pressure water purification.

Membrane Area m² (ft²): 7.7 (83) · Permeate Tube: Female · Maximum Operating Pressure: 10 bar (145 psi)

The TRISEP® DS 10kUF series are sanitary membrane elements designed for food and dairy applications, utilizing a 10.

Retention / pore size: 0.05 µm · Membrane Area m² (ft²): 20.5 (221) · Nominal Pore Size: 0.05 µm

The TRISEP® DS MP005 Series are sanitary membrane elements designed for food and dairy applications, featuring a 0.05 µm polyethersulfone (PES) membrane.