Datasheet summary
OY NP
Engineering summary from PDF text extraction for OY NP. Verify every value with the OEM datasheet.
Summary
Product identification
The SPIRA-CEL® OY Industry NP Series modules feature NADIR® NP polyethersulfone (PES) membranes, which exhibit nanofiltration properties after high-pressure (40 bar) stabilization. These membranes offer high stability against temperature and pH, making them suitable for cleaning acid solutions and biotechnological applications requiring extreme cleaning conditions.
Membrane Characteristics
- NADIR® NP010
- Nominal M.W.C.O.: 1,000 – 1,200 Da
- Na₂SO₄ Salt Rejection: 35 – 75%
- NADIR® NP030
- Nominal M.W.C.O.: 500 – 600 Da
- Na₂SO₄ Salt Rejection: 77 – 95%
Test conditions for salt rejection: 5,000 ppm Na₂SO₄, 40 bar (580 psi), 20°C (68°F).
Design information
All models in this series include an industry hard shell and one brine seal. Models ending in "D" have parallel feed spacers, while other models have diamond-shaped feed spacers. Anti-telescoping devices (ATDs) are attached to the element ends by default but can be provided loose upon request.
| Model | Membrane Area m² (ft²) | Feed Spacer Thickness (mil) |
|---|---|---|
| SPIRA-CEL® OY NP010 2440C | 1.8 (19) | 46 |
| SPIRA-CEL® OY NP010 2440D | 1.8 (19) | 47 |
| SPIRA-CEL® OY NP010 4040C | 6.0 (65) | 46 |
| SPIRA-CEL® OY NP010 4040D | 6.0 (65) | 47 |
| SPIRA-CEL® OY NP010 8040C | 25.0 (269) | 46 |
| SPIRA-CEL® OY NP010 8040D | 25.0 (269) | 47 |
| SPIRA-CEL® OY NP030 2440C | 1.8 (19) | 46 |
| SPIRA-CEL® OY NP030 2440D | 1.8 (19) | 47 |
| SPIRA-CEL® OY NP030 4040C | 6.0 (65) | 46 |
| SPIRA-CEL® OY NP030 4040D | 6.0 (65) | 47 |
| SPIRA-CEL® OY NP030 8040C | 25.0 (269) | 46 |
| SPIRA-CEL® OY NP030 8040D | 25.0 (269) | 47 |
Operating limits
- Maximum Operating Pressure: 40 bar (580 psi)
- Maximum Operating Temperature: 80°C (176°F)
- Operating pH Range: 0.0 – 12.0
- Cleaning pH Range: 0.0 – 12.0
- Maximum Pressure Drop:
- 2 bar (29.0 psi) @ 5 – 50°C per element
- 1.3 bar (18.9 psi) @ 50 – 65°C per element
- 0.5 bar (7.3 psi) @ 65 – 80°C per element
- 2 bar (29.0 psi) @ 80°C per housing
Physical dimensions
| Model | Element Weight kg (lb) | Dim. A mm (inches) | Dim. B mm (inches) | Dim. C mm (inches) | Permeate Tube |
|---|---|---|---|---|---|
| SPIRA-CEL® OY NP010 2440C | 3 (7) | 1,016 (40.0) | 62.0 (2.44) | 19.05 (0.75) | Male |
| SPIRA-CEL® OY NP010 2440D | 3 (7) | 1,016 (40.0) | 62.0 (2.44) | 19.05 (0.75) | Male |
| SPIRA-CEL® OY NP010 4040C | 4 (9) | 1,016 (40.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® OY NP010 4040D | 4 (9) | 1,016 (40.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® OY NP010 8040C | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 30.15 (1.187) | Female |
| SPIRA-CEL® OY NP010 8040D | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 30.15 (1.187) | Female |
| SPIRA-CEL® OY NP030 2440C | 3 (7) | 1,016 (40.0) | 62.0 (2.44) | 19.05 (0.75) | Male |
| SPIRA-CEL® OY NP030 2440D | 3 (7) | 1,016 (40.0) | 62.0 (2.44) | 19.05 (0.75) | Male |
| SPIRA-CEL® OY NP030 4040C | 4 (9) | 1,016 (40.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® OY NP030 4040D | 4 (9) | 1,016 (40.0) | 101.5 (4.0) | 16.0 (0.63) | Female |
| SPIRA-CEL® OY NP030 8040C | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 30.15 (1.187) | Female |
| SPIRA-CEL® OY NP030 8040D | 16 (36) | 1,016 (40.0) | 200.5 (7.9) | 30.15 (1.187) | Female |
Note: For female elements, "C" is the Inner Diameter. For male elements, "C" is the Outer Diameter. Male elements have a protruding permeate tube, with Dimension "D" being 25.4 mm (1.0 in).
Important Information
- Start-up: MANN+HUMMEL Water & Fluid Solutions recommends flushing elements for 30 minutes at low pressure and discarding permeate during the flush.
- Cleaning: TRISEP® membrane elements require periodic cleaning. Refer to the Membrane Cleaning Guide (TSG-C001).
- Storage: TRISEP membrane elements must be stored appropriately. Refer to Element Storage Guides (TSG-O-009 & TSG-O-010).
Customizable Specialty Elements
MANN+HUMMEL Water & Fluid Solutions offers a range of customizable membranes and element designs for challenging water and process applications, including low-fouling RO, submerged UF, continuous high temperature, ultra-high pressure, and unique sanitary designs.
Disclaimer: This summary is based on the provided text extract. The original OEM PDF datasheet may contain additional figures, footnotes, or more recent revisions. For contractual data and complete specifications, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.