Datasheet summary
TS 40 NF
Engineering summary from PDF text extraction for TS 40 NF. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Line: TurboClean® Food & Dairy
- Series: TS40 NF Heat Sanitizable Series
- Key Features: Patented sanitary hard-shell design offering approximately 60% less bypass flow than other sanitary elements, leading to energy savings and/or higher flux rates. This also results in higher cross-flow velocity for more effective membrane cleaning. Elements are stronger than net-wrapped sanitary elements, capable of withstanding higher pressure drops, and feature the tightest OD tolerance and optimal circularity for easy loading and unloading.
- Membrane Type: Polypiperazine
- Nominal M.W.C.O.: 200 – 300 Da
- Stabilized MgSO₄ Rejection: 99.0%
- Typical NaCl Rejection: 40%
Design Information
| Model | Part Number | Membrane Area m² (ft²) | Feed Spacer Thickness (mil) |
|---|---|---|---|
| TurboClean® NF 3838-TS40-HS-47 | 192080383 | 4.9 (53) | 47 |
| TurboClean® NF 3840-TS40-HS-31 | 162060384 | 6.5 (70) | 31 |
| TurboClean® NF 8038-TS40-HS-46 | 169012838 | 26.9 (290) | 46 |
Notes:
- All models on this sheet feature a TurboClean sanitary outer wrap.
- 47 mil spacers are parallel feed spacers; all other models have diamond-shaped feed spacers.
- Heat-sanitizable elements will experience a one-time flux loss after sanitization.
Operating limits
- Maximum Operating Pressure: 55 bar (800 psi)
- Maximum Sanitization Pressure: 1.7 bar (25 psi)
- Maximum Operating Temperature: 50°C (122°F)
- Maximum Sanitization Temperature: 85°C (185°F) at 1.7 bar maximum pressure
- Cleaning pH Range: 1.0 – 12.0
- Chlorine Tolerance: < 0.1 ppm (Pretreatment is recommended for free chlorine removal to prevent membrane damage)
- Maximum Pressure Drop: 1.4 bar (20 psi) per element; 6 bar (80 psi) per housing
- Hydrogen Peroxide Usage Limit: 20 ppm continuous; 1,000 ppm for short-term cleaning (short-term cleaning at 25°C (77°F) max)
Mechanical / hydraulic
| Model | Element Weight kg (lb) | Dim. A mm (inches) | Dim. B mm (inches) | Dim. C mm (inches) | Permeate Tube |
|---|---|---|---|---|---|
| TurboClean® NF 3838-TS40-HS-47 | 4 (9) | 965 (38.0) | 96 (3.8) | 21.2 (0.83) | Female |
| TurboClean® NF 3840-TS40-HS-31 | 4 (9) | 984 (38.75) | 96 (3.8) | 21.2 (0.83) | Female |
| TurboClean® NF 8038-TS40-HS-46 | 16 (36) | 965 (38.0) | 201 (7.9) | 28.6 (1.125) | Female |
Notes:
- Shipping weight is dependent on packaging material and quantity shipped.
- Dimension "C" is the inner diameter.
Regulatory
- All models conform to USDA 3A sanitary standard 45-03.
- Uses FDA (CFR Title 21) compliant materials.
- Complies with EU regulation (EC) No. 1935/2004 and No. 10/2011.
- Halal and Kosher certifications.
Important Information
- Start-up: MANN+HUMMEL recommends flushing elements for 30 minutes at low pressure and discarding permeate during the flush prior to operation.
- Cleaning: TurboClean® membrane elements must be cleaned periodically to ensure proper operation and prevent membrane damage.
- Storage: TurboClean membrane elements must be stored appropriately to ensure proper operation and prevent membrane damage.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.