Datasheet summary
WT Warm Temp
Engineering summary from PDF text extraction for WT Warm Temp. Verify every value with the OEM datasheet.
Summary
Product identification
MANN+HUMMEL Water & Fluid Solutions offers TurboClean® Warm Temperature elements, designed for continuous operation up to 60°C. These elements feature a patented sanitary hard-shell design, resulting in approximately 60% less bypass flow compared to other sanitary elements. TurboClean elements are robust, stronger than net-wrapped sanitary elements, and can withstand higher pressure drops. Their tight outer diameter (OD) tolerance and optimal circularity aim for easier loading and unloading.
Key benefits include:
- Strongest Sanitary Element
- Most Effective Cleaning
- Longer Operating Life
- Easiest Installation
- Better Performance
Membrane Characteristics
Design Information
| Model | Maximum Operating Pressure | Membrane Area m² (ft²) | Feed Spacer Thickness (mil) |
|---|---|---|---|
| TurboClean® WT 8038-RO-34 | 27.6 bar @ 60°C | 32.5 (350) | 34 |
| TurboClean® WT 8040-RO-34 | 27.6 bar @ 60°C | 32.5 (350) | 34 |
| TurboClean® WT 8040-X20-34 | 27.6 bar @ 60°C | 32.5 (350) | 34 |
| TurboClean® WT 8038-UP005-34 | 10.0 bar @ 60°C | 30.7 (330) | 34 |
| TurboClean® WT 8040-UP005-34 | 10.0 bar @ 60°C | 30.7 (330) | 34 |
| TurboClean® WT 8038-UP010-34 | 10.0 bar @ 60°C | 30.7 (330) | 34 |
| TurboClean® WT 8040-UP010-34 | 10.0 bar @ 60°C | 30.7 (330) | 34 |
All models include a TurboClean sanitary outer wrap and diamond feed spacers. All 8040 models feature anti-telescoping devices (ATDs) attached to the ends of the element and one interconnector.
Membrane Types
- ACM2: Polyamide RO, with a nominal solute rejection of 99.5% for NaCl.
- X-20™: Low Fouling Polyamide RO, with a nominal solute rejection of 99.5% for NaCl.
- UP005: Polyethersulfone UF, with a nominal M.W.C.O. of 5,000 Da.
- UP010: Polyethersulfone UF, with a nominal M.W.C.O. of 10,000 Da.
Operating limits
- Maximum Operating Temperature: 60°C (140°F)
- Cleaning pH Range: 1.0 – 12.0
- Chlorine Tolerance (RO models): < 0.1 ppm
- Chlorine Tolerance (UF models): 200 ppm (sanitization) at pH ≥ 10.5
- Maximum Pressure Drop at 30°C: 1.4 bar (20 psi) per element; 6 bar (80 psi) per housing
- Maximum Pressure Drop at 60°C: 1 bar (15 psi) per element; 4 bar (60 psi) per housing
Mechanical / hydraulic
| Model | Element Weight kg (lb) | Dim. A mm (inches) | Dim. B mm (inches) | Dim. C mm (inches) | Permeate Tube |
|---|---|---|---|---|---|
| TurboClean® WT 8038-RO-34 | 16 (36) | 965 (38.0) | 201 (7.9) | 28.6 (1.125) | Female |
| TurboClean® WT 8040-RO-34 | 16 (36) | 1,016 (40.0) | 201 (7.9) | 28.6 (1.125) | Female |
| TurboClean® WT 8040-X20-34 | 16 (36) | 1,016 (40.0) | 201 (7.9) | 28.6 (1.125) | Female |
| TurboClean® WT 8038-UP005-34 | 16 (36) | 965 (38.0) | 201 (7.9) | 28.9 (1.138) | Female |
| TurboClean® WT 8040-UP005-34 | 16 (36) | 1,016 (40.0) | 201 (7.9) | 28.6 (1.125) | Female |
| TurboClean® WT 8038-UP010-34 | 16 (36) | 965 (38.0) | 201 (7.9) | 28.9 (1.138) | Female |
| TurboClean® WT 8040-UP010-34 | 16 (36) | 1,016 (40.0) | 201 (7.9) | 28.6 (1.125) | Female |
Dimension "C" refers to the Inner Diameter. Element weight is subject to variation based on packaging material and quantity shipped.
Regulatory
All listed models utilize FDA (CFR Title 21) compliant materials, adhere to EU regulations (EC) No. 1935/2004 and No. 10/2011, and possess Halal and Kosher certifications. All 38-inch long models conform to USDA 3A sanitary standard 45-03.
Important Information
- Start-up: It is recommended to flush elements for 30 minutes at low pressure, discarding the permeate during this initial flush.
- Cleaning: Periodic cleaning is necessary for proper operation and to prevent membrane damage.
- Storage: Elements must be stored appropriately to ensure proper operation and prevent damage.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.