2540-X201-TSF

Summary

Product Identification

• Product Name: 2.5" X-20 Low Fouling Turboclean Element
• Model: 2540-X201-TSF
• Membrane Type: X20 Fully Aromatic Polyamide-Urea Advanced Composite Membrane
• Configuration: Spiral Wound, Fiberglass Outer Wrap

Operating Limits

• Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: <0.1 ppm
• Maximum Feed Flow: 6 GPM (1.4 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1
• Maximum SDI (15 minutes): 5.0
• Maximum Turbidity: 1 NTU

Performance

Performance is based on the following test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.

• Average Salt Rejection: 98.00%
• Minimum Salt Rejection: 99.00%
• Permeate Flow: 650 GPD (2.0 m³/day)*

* Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.

Mechanical / Hydraulic

• Mechanical Configuration: Filmtec Style Core Tube
• Active Membrane Area: 26 ft² (2.4 m²)
• Feed Spacer: 0.031" thick diamond spacer
• Element Weight: 7 lbs (3.2 kg)
• Dimensions (Units: inches, with millimeters in parenthesis):
  • Length (A): 40.0 (1,016)
  • Diameter (B): 2.5 (63)
  • Permeate Tube (C): 0.75 (19.1)

---

Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or the full context of the original document. Contractual data for a project must match the OEM PDF revision used on that project.

Official datasheet (PDF)

PDF datasheet