Back to RO Membranes
MANN+HUMMEL logo

International brand dossier

TriSep Membranes

TriSep is now presented through MANN+HUMMEL water and membrane solutions as a customizable specialty membrane product line for RO, NF, UF, and MF designs.

Brand profile and portfolio

TriSep is now presented through MANN+HUMMEL water and membrane solutions as a customizable specialty membrane product line for RO, NF, UF, and MF designs.It is relevant when standard elements do not fit the duty and engineers need to specify element size, outer wrap, permeate tube, feed spacer, membrane type, high-temperature or high-pressure service, and private-label options.

TriSep Membranes's position in RO/NF membranes and related equipment is defined by product families such as Low Fouling X-20 Elements, Cellulose Acetate Elements, High Performance ACM Elements and Low Pressure ACM Elements.

The portfolio is best understood inside brackish water, seawater desalination, ultrapure water, process separation, reuse, degassing, and membrane system packaging, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Trisep X-20, 4040-SB20-TSA and 4040-SB50-TSA.

75

Models and series

10

Product families

Model index

Quick Model Index

75 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 75 of 75 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

Trisep X-20 Datasheet

Select here your Pre-Selection

Average Salt Rejection: 99.5% · Minimum Salt Rejection: 98.5% · Minimum Brine/Permeate Flow Ratio: 5:1

The TriSep X-20 is a next-generation reverse osmosis membrane designed for high-fouling feedwater applications, featuring a unique polyamide-urea copolymer barrier layer.

DetailsPDF

4040-SB20-TSA

Low Fouling X-20 Elements

Average Salt Rejection: 97.00% · Minimum Salt Rejection: 98.00% · Permeate Tube (C): 0.75 inches (19.1 millimeters)

4040-SB20-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

4040-SB50-TSA

Low Fouling X-20 Elements

Average Salt Rejection: 92.50% · Minimum Salt Rejection: 95.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-SB50-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

8040-SB50-TSA

Low Fouling X-20 Elements

Average Salt Rejection: 92.50% · Minimum Salt Rejection: 95.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 8" CA RO Element Series membrane is designed for reverse osmosis applications.

DetailsPDF

8340-SB20-TSOA

Low Fouling X-20 Elements

Average Salt Rejection: 98.00 % · Minimum Salt Rejection: 97.00 % · Permeate Tube (C): 1.14 inches (29.0 millimeters)

This is an 8.3-inch cellulose acetate reverse osmosis membrane element designed for spiral wound configurations.

DetailsPDF

8540-SB20-TSA

Low Fouling X-20 Elements

Average Salt Rejection: 97.00% · Minimum Salt Rejection: 98.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8540-SB20-TSA is an 8.5-inch cellulose acetate blend reverse osmosis membrane element with 440 square feet of active membrane area.

DetailsPDF

8540-SB50-TSA

Low Fouling X-20 Elements

Average Salt Rejection: 92.50% · Minimum Salt Rejection: 95.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 8540-SB50-TSA is an 8.5-inch reverse osmosis membrane element with a cellulose acetate blend in a spiral-wound configuration.

DetailsPDF

SB90 Nanofilt5ration

Low Fouling X-20 Elements

Chlorine tolerance: up to 1 ppm

The TriSep SB90 is a nanofiltration membrane element ideal for beverage water purification.

DetailsPDF

2540-X201-TSF

Cellulose Acetate Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 2540-X201-TSF is a 2.5-inch by 40-inch low fouling reverse osmosis membrane element for water treatment.

DetailsPDF

4040-X201-TSA

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-X201-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

4040-X201-TSF

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-X201-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

8040-X201-TSA

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8040-X201-TSA is an 8" X-20 low fouling reverse osmosis membrane element featuring an advanced composite membrane with FoulGuard technology.

DetailsPDF

8040-X201-TSAN

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Permeate Tube (C): 1.50 inches (38.1 mm)

This is an 8-inch low fouling RO element featuring an advanced composite membrane and FoulGuard technology.

DetailsPDF

8040-X201-TSFA

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The TriSep 8040-X201-TSFA is an 8-inch low fouling reverse osmosis element featuring an advanced composite membrane and FoulGuard technology.

DetailsPDF

8040-X201-UWA

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8040-X201-UWA is an 8-inch X-20 Low Fouling Reverse Osmosis element featuring an advanced composite membrane and FoulGuard Technology.

DetailsPDF

8040-X201-UWAN

Cellulose Acetate Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8040-X201-UWAN is an 8-inch X20 Low Fouling Reverse Osmosis element with an advanced composite membrane and FoulGuard technology.

DetailsPDF

4040-ACM1-TSA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-ACM1-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

4040-ACM1-TSF

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-ACM1-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

8040-ACM1-TSA

High Performance ACM Elements

Average Salt Rejection: 99.00% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8-inch TriSep ACM reverse osmosis membrane element with a 365 ft² active area and a fiberglass outer wrap.

DetailsPDF

2540-ACM2-TSF

High Performance ACM Elements

Average Salt Rejection (%): 98.00 · Minimum Salt Rejection (%): 99.00 · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 2.5" ACM RO element features an advanced composite polyamide membrane in a spiral wound configuration with a fiberglass outer wrap.

DetailsPDF

4040-ACM2-TSA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-ACM2-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

4040-ACM2-TSF

High Performance ACM Elements

Average Salt Rejection: 98.50 % · Minimum Salt Rejection: 99.50 % · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-ACM2-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

8040-ACM2-TSA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Permeate Flow: 9,700 GPD (36.0 m³/day)

This 8" ACM RO Element Series spiral wound membrane is designed for reverse osmosis applications with advanced composite polyamide construction.

DetailsPDF

8040-ACM2-TSAN

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% (Note: This appears to be higher than average salt rejection in the source text and should be verified in the official PDF.) · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8-inch ACM reverse osmosis membrane element with an advanced composite polyamide membrane and fiberglass outer wrap.

DetailsPDF

8040-ACM2-UWA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 8040-ACM2-UWA is an 8-inch ACM Series reverse osmosis element with an advanced composite membrane.

DetailsPDF

8040-ACM2-UWAN

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8-inch ACM RO membrane element from TriSep Membranes, featuring an advanced composite polyamide spiral wound configuration with a fiberglass outer wrap.

DetailsPDF

8340-ACM2-TSQA

High Performance ACM Elements

Average Salt Rejection: 99.00% · Minimum Salt Rejection: 98.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 8.3" ACM RO element features an advanced composite membrane and spiral wound configuration with a fiberglass outer wrap.

DetailsPDF

8540-ACM2-TSFA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8.5" ACM RO Element Series reverse osmosis membrane with an advanced composite membrane type.

DetailsPDF

4040-ACM3-TSA

High Performance ACM Elements

Average Salt Rejection (%): 98.50 · Minimum Salt Rejection (%): 99.20 · Permeate Tube (C): 0.75 inches (19.1 mm)

4040-ACM3-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

4040-ACM3-TSF

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.20% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-ACM3-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

8040-ACM3-TSA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.20% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 8040-ACM3-TSA is an 8-inch reverse osmosis membrane element designed for advanced composite polyamide applications.

DetailsPDF

8040-ACM3-TSAN

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.20% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 8040-ACM3-TSAN is an 8" ACM RO element from TriSep Membranes featuring an advanced composite membrane in a spiral wound configuration.

DetailsPDF

8040-ACM3-UWA

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.20% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8040-ACM3-UWA is an 8-inch ACM advanced composite reverse osmosis membrane element.

DetailsPDF

8040-ACM3-UWAN

High Performance ACM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 99.20% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 8" ACM RO Element Series spiral wound membrane is designed for reverse osmosis applications, featuring an advanced composite membrane.

DetailsPDF

2540-ACM4-TSF

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 2540-ACM4-TSF is a 2.5" ACM-LP RO element with an advanced composite membrane and fiberglass outer wrap.

DetailsPDF

4040-ACM4-TSA

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is a 4-inch ACM-LP low-pressure reverse osmosis membrane element with an active area of 88 sq ft.

DetailsPDF

4040-ACM4-TSF

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

4040-ACM4-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

8040-ACM4-TSA

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 8040-ACM4-TSA is an 8-inch low-pressure reverse osmosis membrane element designed for a variety of water treatment applications.

DetailsPDF

8040-ACM4-TSAN

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 8" TriSep ACM-LP low pressure RO element features an advanced composite polyamide membrane in a spiral-wound configuration with fiberglass outer wrap.

DetailsPDF

8040-ACM4-UWA

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8040-ACM4-UWA is an 8" ACM-LP low pressure RO element with a composite polyamide membrane and fiberglass outer wrap.

DetailsPDF

8040-ACM4-UWAN

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is a TriSep 8" ACM-LP Low Pressure RO membrane element with a fully aromatic polyamide membrane and 400 ft² of active area.

DetailsPDF

8540-ACM4-TSFA

Low Pressure ACM Elements

Average Salt Rejection: 98.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8.5-inch low-pressure reverse osmosis element from the ACM-LP series, designed for advanced composite polyamide membrane filtration.

DetailsPDF

2540-ACM5-TSF

Low Pressure ACM Elements

Average Salt Rejection: 97.50% · Minimum Salt Rejection: 98.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 2540-ACM5-TSF is a 2.5" ACM-LP Series advanced composite polyamide reverse osmosis element.

DetailsPDF

4040-ACM5-TWF

Low Pressure ACM Elements

Average Salt Rejection (%): 97.50 · Minimum Salt Rejection (%): 98.50 · Permeate Tube (C): 0.75 inches (19.1 millimeters)

This is a 4-inch TriSep ACM-LP low-pressure RO membrane element designed for general water treatment applications.

DetailsPDF

8040-ACM5-TSA

Low Pressure ACM Elements

Average Salt Rejection: 97.50% · Minimum Salt Rejection: 98.50% · Permeate Tube (C): 1.50 inches (38.1 mm)

This is an 8" ACM-LP Low Pressure RO element from TriSep Membranes, featuring an advanced composite polyamide membrane for reverse osmosis applications.

DetailsPDF

8040-ACM5-TSAN

Low Pressure ACM Elements

Average Salt Rejection: 97.50% · Minimum Salt Rejection: 98.50% · Permeate Tube (C): 1.50 inches (38.1 millimeters)

The 8040-ACM5-TSAN is a low-pressure reverse osmosis membrane element from the TriSep 8" ACM-LP series.

DetailsPDF

8040-ACM5-UWA

Low Pressure ACM Elements

Average Salt Rejection: 97.50% · Minimum Salt Rejection: 98.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This TriSep 8040-ACM5-UWA is an 8-inch low-pressure reverse osmosis membrane element designed for water treatment applications.

DetailsPDF

8040-ACM5-UWAN

Low Pressure ACM Elements

Average Salt Rejection: 97.50% · Minimum Salt Rejection: 98.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The TriSep 8040-ACM5-UWAN is an 8" low pressure reverse osmosis membrane element with an advanced composite polyamide, spiral wound configuration.

DetailsPDF

2540-TS40-TSF

Nanofiltration AMM Elements

Average Salt Rejection: 99.0% · Minimum Salt Rejection: 98.0% · Permeate Tube (C): 0.75” (19.1 mm)

This is a TriSep Nanofiltration Element with an advanced polypiperazine amide membrane, designed for water treatment applications.

DetailsPDF

2540-TS80-TSF

Nanofiltration AMM Elements

Average Salt Rejection: 97.00% (MgSO₄) · Minimum Salt Rejection: 99.00% (MgSO₄) · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is a 2.5-inch TS80 nanofiltration element with an ANM advanced aromatic polyamide membrane.

DetailsPDF

2540-XN45-TSF

Nanofiltration AMM Elements

Average Salt Rejection: 92.50% · Minimum Salt Rejection: 95.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 2.5-inch XN45 Nanofiltration Element Series features an advanced polyamide membrane for water treatment applications.

DetailsPDF

4040-XN45-TSF

Nanofiltration AMM Elements

Average Salt Rejection (%): 92.00 · Minimum Salt Rejection (%): 95.00 · Permeate Tube (C): 0.75 inches (19.1 mm)

4040-XN45-TSF is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

PLT 2540-TS80-31

Nanofiltration AMM Elements

Typical NaCl rejection: 80% · Stabilized MgSO₄ Rejection: 99.2% · Minimum MgSO₄ Rejection: 98.5%

The TRISEP® PLT 2540-TS80-31 is a high-rejection nanofiltration membrane element for softening applications.

DetailsPDF

4040-TS80-TSA

Nanofiltration AMM Elements

Selection cues: rejection · permeate flow · membrane area and operating pressure

This TriSep TS80-TSA is a reverse osmosis membrane element for water treatment applications.

DetailsPDF

8040-XN45-TSA

Nanofiltration AMM Elements

Average Salt Rejection: 92.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Permeate Flow: 9,500 GPD (35.0 m³/day)

This is an 8" XN45 Nanofiltration element with an advanced polyamide membrane designed for water treatment applications.

DetailsPDF

8040-TS80-TSAN

Nanofiltration AMM Elements

Average Salt Rejection: 99.00% · Minimum Salt Rejection: 97.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The TriSep 8040-TS80-TSAN is an advanced nanofiltration membrane element for water treatment.

DetailsPDF

8040-TS80-UWAN

Nanofiltration AMM Elements

Average Salt Rejection: 97.00% · Minimum Salt Rejection: 99.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This is an 8" TS80 series advanced nanofiltration membrane element with an ANM polyamide membrane.

DetailsPDF

8040-TS83-TSA

Nanofiltration AMM Elements

Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Permeate flow: 10,000 GPD (37.0 m³/day) · Permeate Tube (C): 1.50 inches (38.1 millimeters)

This 8040-TS83-TSA is an 8-inch spiral wound nanofiltration membrane element with a fiberglass outer wrap and TriSep Style Core Tube.

DetailsPDF

8040-TS83-TSAN

Nanofiltration AMM Elements

Average Salt Rejection: 97.00% · Minimum Salt Rejection: 98.50% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

The 8040-TS83-TSAN is an 8-inch advanced nanofiltration membrane element from TriSep Membranes featuring a spiral-wound configuration with fiberglass outer wrap.

DetailsPDF

8040-TS83-UWA

Nanofiltration AMM Elements

Average Salt Rejection: 98.50% · Minimum Salt Rejection: 97.00% · Minimum Brine Flow/Permeate Flow Ratio: 5:1

This 8040-TS83-UWA is a TriSep Nanofiltration membrane element with an advanced polyamide membrane.

DetailsPDF

8040-TS83-UWAN

Nanofiltration AMM Elements

Average Salt Rejection (%): 97.00 · Minimum Salt Rejection (%): 98.50 · Permeate Tube (C): 1.50 inches (38.1 mm)

The 8040-TS83-UWAN is an 8" spiral wound advanced nanofiltration membrane element designed for water treatment.

DetailsPDF

4040-UE50-QSF

Ultrafiltration Elements

Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Permeate Flow: 4,400 GPD (16.0 m³/day) · Permeate Tube (C): 0.75 inches (19.1 mm)

4040-UE50-QSF is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

DetailsPDF

8040-UE50-QSA

Ultrafiltration Elements

Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Nominal Permeate Flow: 20,000 GPD (75.0 m³/day) · Permeate Tube (C): 1.50 inches (38.1 mm)

This TriSep 8040-UE50-QSA is an 8-inch AUM advanced ultrafiltration membrane element with a 100,000 MWCO and a spiral-wound configuration.

DetailsPDF

4040-UA60-TSA

Ultrafiltration Elements

Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Permeate Flow: 2,500 GPD (9.0 m³/day) · Permeate Tube (C) Diameter: 0.75 inches (19.1 mm)

4040-UA60-TSA is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

DetailsPDF

8040-UA60-TSA

Ultrafiltration Elements

Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Permeate flow: 9,500 GPD (35.0 m³/day) · Permeate Tube (C): 1.50 inches (38.1 millimeters)

This is an 8" UA60 Ultrafiltration Element from TriSep Membranes with a spiral-wound configuration and fiberglass outer wrap.

DetailsPDF

4040-UE10-QSF

Ultrafiltration Elements

Minimum Brine Flow/Permeate Flow Ratio: 5:1 · Permeate Tube (C): 0.75 inches (19.1 mm) · Maximum Feed Flow: 20 GPM (4.5 m³/hr)

4040-UE10-QSF is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

DetailsPDF

8040-UE10-QSA

Ultrafiltration Elements

Nominal Permeate Flow: 14,000 GPD (53 m³/day) · Permeate Tube (C): 1.50” (38.1 mm) · Maximum Feed Flow: 80 GPM (18 m³/hr)

This TriSep 8040-UE10-QSA is an advanced ultrafiltration membrane element designed for water treatment applications.

DetailsPDF

2540-UF10-QSF

Ultrafiltration Elements

Average Salt Rejection: 99.5% · Minimum Salt Rejection: 98.5% · Minimum Brine/Permeate Flow Ratio: 5:1

The TriSep X-20™ is a durable reverse osmosis membrane designed for high fouling feed waters, featuring a polyamide-urea copolymer barrier layer and residual amino groups.

DetailsPDF

TurboCleanR-UF-6338-UE10-31

Ultrafiltration Elements

Permeate Tube (C): 1.14” (28.9 mm) · Maximum Feed Flow: 70 GPM (15.8 m³/hr) · Active Membrane Area: 225 ft² (20.9 m²)

The TriSep TurboCleanR-UF-6338-UE10-31 is a 6.3-inch spiral wound sanitary element designed for ultrafiltration applications.

DetailsPDF

TurboCleanR-UF-6338-UE10-46

Ultrafiltration Elements

Permeate Tube (C): 1.14” (28.9 mm) · Maximum Feed Flow: 70 GPM (15.8 m³/hr) · Active Membrane Area: 175 ft² (16.3 m²)

This TriSep TurboCleanR-UF-6338-UE10-46 is an advanced ultrafiltration membrane element with a nominal molecular weight cut-off of 10,000.

DetailsPDF

TurboCleanR-UF-6338-UE10-65

Ultrafiltration Elements

Permeate Tube (C): 1.14” (28.9 mm) · Maximum Feed Flow: 70 GPM (15.8 m³/hr) · Active Membrane Area: 138 ft² (12.8 m²)

This TriSep Membranes TurboCleanR-UF-6338-UE10-65 is an advanced ultrafiltration membrane element for water treatment applications.

DetailsPDF

4040-TM10-QXF

Microfiltration

Typical NaCl rejection: 80% · Stabilized MgSO₄ Rejection (%): 99.2% · Minimum MgSO₄ Rejection (%): 98.5%

The TRISEP® TS80 is a versatile nanofiltration (NF) membrane element designed for high solute rejection of both salts and uncharged organic solutes.

DetailsPDF

Trisep HPR

High Pressure

Membrane Area m² (ft²): 2.1 (23) · Permeate Tubed: Male · Maximum Operating Pressure: 83 bar (1,200 psi)

The TRISEP HPR series is a line of high-pressure industrial membrane elements designed for challenging water purification applications.

DetailsPDF

Trisep UPR

High Pressure

Maximum Operating Pressure: 120 bar (1,740 psi) · Maximum Pressure Drop: 1.4 bar (20 psi) per element; 6 bar (80 psi) per housing · Pressure: 120 bar

The Trisep UPR series consists of ultra-high pressure industrial reverse osmosis and nanofiltration membrane elements designed for a maximum operating pressure of 120 bar...

DetailsPDF

PLT 2540-TS40-31

High Rejection NF Elements

Typical NaCl rejection: 40% · Stabilized MgSO₄ Rejection (%): 99.0 · Minimum MgSO₄ Rejection (%): 98.5

The TriSep PLT 2540-TS40-31 is a High Rejection Process Nanofiltration Element designed for demineralization and concentration of organic solutes.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose TriSep RO Membranes

This section answers two questions: which main product families TriSep offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are Select here your Pre-Selection, Low Fouling X-20 Elements, Cellulose Acetate Elements, and High Performance ACM Elements. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare feed salinity, target salt rejection, permeate flow, operating pressure, fouling tendency, and element size and connection. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

Showing 6 main families; all 10 appear in the model index below.

Select here your Pre-Selection

1 model in this family. Representative models: Trisep X-20 Datasheet.

Low Fouling X-20 Elements

7 models in this family. Representative models: 4040-SB20-TSA, 4040-SB50-TSA, 8040-SB50-TSA.

Cellulose Acetate Elements

8 models in this family. Representative models: 2540-X201-TSF, 4040-X201-TSA, 4040-X201-TSF.

High Performance ACM Elements

18 models in this family. Representative models: 4040-ACM1-TSA, 4040-ACM1-TSF, 8040-ACM1-TSA.

Low Pressure ACM Elements

14 models in this family. Representative models: 2540-ACM4-TSF, 4040-ACM4-TSA, 4040-ACM4-TSF.

Nanofiltration AMM Elements

13 models in this family. Representative models: 2540-TS40-TSF, 2540-TS80-TSF, 2540-XN45-TSF.

Product introductions and documents

Brand Products & Technical Documents

75 models and series

View product applications, datasheets and family manuals.

Select here your Pre-Selection

1 product profiles

RO
MANN+HUMMEL logo

Product profile

Trisep X-20 Datasheet

The TriSep X-20 is a next-generation reverse osmosis membrane designed for high-fouling feedwater applications, featuring a unique polyamide-urea copolymer barrier layer.

Low Fouling X-20 Elements

7 product profiles

RO
MANN+HUMMEL logo

Product profile

4040-SB20-TSA

4040-SB20-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

4040-SB50-TSA

4040-SB50-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

8040-SB50-TSA

This TriSep 8" CA RO Element Series membrane is designed for reverse osmosis applications.

RO
MANN+HUMMEL logo

Product profile

8340-SB20-TSOA

This is an 8.3-inch cellulose acetate reverse osmosis membrane element designed for spiral wound configurations.

RO
MANN+HUMMEL logo

Product profile

8540-SB20-TSA

The 8540-SB20-TSA is an 8.5-inch cellulose acetate blend reverse osmosis membrane element with 440 square feet of active membrane area.

RO
MANN+HUMMEL logo

Product profile

8540-SB50-TSA

This TriSep 8540-SB50-TSA is an 8.5-inch reverse osmosis membrane element with a cellulose acetate blend in a spiral-wound configuration.

Show remaining Low Fouling X-20 Elements profiles (1)
NF
MANN+HUMMEL logo

Product profile

SB90 Nanofilt5ration

The TriSep SB90 is a nanofiltration membrane element ideal for beverage water purification.

Cellulose Acetate Elements

8 product profiles

RO
MANN+HUMMEL logo

Product profile

2540-X201-TSF

This TriSep 2540-X201-TSF is a 2.5-inch by 40-inch low fouling reverse osmosis membrane element for water treatment.

RO
MANN+HUMMEL logo

Product profile

4040-X201-TSA

4040-X201-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

4040-X201-TSF

4040-X201-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

8040-X201-TSA

The 8040-X201-TSA is an 8" X-20 low fouling reverse osmosis membrane element featuring an advanced composite membrane with FoulGuard technology.

RO
MANN+HUMMEL logo

Product profile

8040-X201-TSAN

This is an 8-inch low fouling RO element featuring an advanced composite membrane and FoulGuard technology.

RO
MANN+HUMMEL logo

Product profile

8040-X201-TSFA

The TriSep 8040-X201-TSFA is an 8-inch low fouling reverse osmosis element featuring an advanced composite membrane and FoulGuard technology.

Show remaining Cellulose Acetate Elements profiles (2)
RO
MANN+HUMMEL logo

Product profile

8040-X201-UWA

The 8040-X201-UWA is an 8-inch X-20 Low Fouling Reverse Osmosis element featuring an advanced composite membrane and FoulGuard Technology.

RO
MANN+HUMMEL logo

Product profile

8040-X201-UWAN

The 8040-X201-UWAN is an 8-inch X20 Low Fouling Reverse Osmosis element with an advanced composite membrane and FoulGuard technology.

High Performance ACM Elements

18 product profiles

RO
MANN+HUMMEL logo

Product profile

4040-ACM1-TSA

4040-ACM1-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

4040-ACM1-TSF

4040-ACM1-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

8040-ACM1-TSA

This is an 8-inch TriSep ACM reverse osmosis membrane element with a 365 ft² active area and a fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

2540-ACM2-TSF

This 2.5" ACM RO element features an advanced composite polyamide membrane in a spiral wound configuration with a fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

4040-ACM2-TSA

4040-ACM2-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

4040-ACM2-TSF

4040-ACM2-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

Show remaining High Performance ACM Elements profiles (12)
RO
MANN+HUMMEL logo

Product profile

8040-ACM2-TSA

This 8" ACM RO Element Series spiral wound membrane is designed for reverse osmosis applications with advanced composite polyamide construction.

RO
MANN+HUMMEL logo

Product profile

8040-ACM2-TSAN

This is an 8-inch ACM reverse osmosis membrane element with an advanced composite polyamide membrane and fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

8040-ACM2-UWA

This 8040-ACM2-UWA is an 8-inch ACM Series reverse osmosis element with an advanced composite membrane.

RO
MANN+HUMMEL logo

Product profile

8040-ACM2-UWAN

This is an 8-inch ACM RO membrane element from TriSep Membranes, featuring an advanced composite polyamide spiral wound configuration with a fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

8340-ACM2-TSQA

This 8.3" ACM RO element features an advanced composite membrane and spiral wound configuration with a fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

8540-ACM2-TSFA

This is an 8.5" ACM RO Element Series reverse osmosis membrane with an advanced composite membrane type.

RO
MANN+HUMMEL logo

Product profile

4040-ACM3-TSA

4040-ACM3-TSA is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

4040-ACM3-TSF

4040-ACM3-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

8040-ACM3-TSA

This TriSep 8040-ACM3-TSA is an 8-inch reverse osmosis membrane element designed for advanced composite polyamide applications.

RO
MANN+HUMMEL logo

Product profile

8040-ACM3-TSAN

This 8040-ACM3-TSAN is an 8" ACM RO element from TriSep Membranes featuring an advanced composite membrane in a spiral wound configuration.

RO
MANN+HUMMEL logo

Product profile

8040-ACM3-UWA

The 8040-ACM3-UWA is an 8-inch ACM advanced composite reverse osmosis membrane element.

RO
MANN+HUMMEL logo

Product profile

8040-ACM3-UWAN

This 8" ACM RO Element Series spiral wound membrane is designed for reverse osmosis applications, featuring an advanced composite membrane.

Low Pressure ACM Elements

14 product profiles

RO
MANN+HUMMEL logo

Product profile

2540-ACM4-TSF

The 2540-ACM4-TSF is a 2.5" ACM-LP RO element with an advanced composite membrane and fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

4040-ACM4-TSA

This is a 4-inch ACM-LP low-pressure reverse osmosis membrane element with an active area of 88 sq ft.

RO
MANN+HUMMEL logo

Product profile

4040-ACM4-TSF

4040-ACM4-TSF is a reverse-osmosis membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

RO
MANN+HUMMEL logo

Product profile

8040-ACM4-TSA

This TriSep 8040-ACM4-TSA is an 8-inch low-pressure reverse osmosis membrane element designed for a variety of water treatment applications.

RO
MANN+HUMMEL logo

Product profile

8040-ACM4-TSAN

This 8" TriSep ACM-LP low pressure RO element features an advanced composite polyamide membrane in a spiral-wound configuration with fiberglass outer wrap.

RO
MANN+HUMMEL logo

Product profile

8040-ACM4-UWA

The 8040-ACM4-UWA is an 8" ACM-LP low pressure RO element with a composite polyamide membrane and fiberglass outer wrap.

Show remaining Low Pressure ACM Elements profiles (8)
RO
MANN+HUMMEL logo

Product profile

8040-ACM4-UWAN

This is a TriSep 8" ACM-LP Low Pressure RO membrane element with a fully aromatic polyamide membrane and 400 ft² of active area.

RO
MANN+HUMMEL logo

Product profile

8540-ACM4-TSFA

This is an 8.5-inch low-pressure reverse osmosis element from the ACM-LP series, designed for advanced composite polyamide membrane filtration.

RO
MANN+HUMMEL logo

Product profile

2540-ACM5-TSF

This TriSep 2540-ACM5-TSF is a 2.5" ACM-LP Series advanced composite polyamide reverse osmosis element.

RO
MANN+HUMMEL logo

Product profile

4040-ACM5-TWF

This is a 4-inch TriSep ACM-LP low-pressure RO membrane element designed for general water treatment applications.

RO
MANN+HUMMEL logo

Product profile

8040-ACM5-TSA

This is an 8" ACM-LP Low Pressure RO element from TriSep Membranes, featuring an advanced composite polyamide membrane for reverse osmosis applications.

RO
MANN+HUMMEL logo

Product profile

8040-ACM5-TSAN

The 8040-ACM5-TSAN is a low-pressure reverse osmosis membrane element from the TriSep 8" ACM-LP series.

RO
MANN+HUMMEL logo

Product profile

8040-ACM5-UWA

This TriSep 8040-ACM5-UWA is an 8-inch low-pressure reverse osmosis membrane element designed for water treatment applications.

RO
MANN+HUMMEL logo

Product profile

8040-ACM5-UWAN

The TriSep 8040-ACM5-UWAN is an 8" low pressure reverse osmosis membrane element with an advanced composite polyamide, spiral wound configuration.

Nanofiltration AMM Elements

13 product profiles

NF
MANN+HUMMEL logo

Product profile

2540-TS40-TSF

This is a TriSep Nanofiltration Element with an advanced polypiperazine amide membrane, designed for water treatment applications.

NF
MANN+HUMMEL logo

Product profile

2540-TS80-TSF

This is a 2.5-inch TS80 nanofiltration element with an ANM advanced aromatic polyamide membrane.

NF
MANN+HUMMEL logo

Product profile

2540-XN45-TSF

This 2.5-inch XN45 Nanofiltration Element Series features an advanced polyamide membrane for water treatment applications.

NF
MANN+HUMMEL logo

Product profile

4040-XN45-TSF

4040-XN45-TSF is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

NF
MANN+HUMMEL logo

Product profile

PLT 2540-TS80-31

The TRISEP® PLT 2540-TS80-31 is a high-rejection nanofiltration membrane element for softening applications.

NF
MANN+HUMMEL logo

Product profile

4040-TS80-TSA

This TriSep TS80-TSA is a reverse osmosis membrane element for water treatment applications.

Show remaining Nanofiltration AMM Elements profiles (7)
NF
MANN+HUMMEL logo

Product profile

8040-XN45-TSA

This is an 8" XN45 Nanofiltration element with an advanced polyamide membrane designed for water treatment applications.

NF
MANN+HUMMEL logo

Product profile

8040-TS80-TSAN

The TriSep 8040-TS80-TSAN is an advanced nanofiltration membrane element for water treatment.

NF
MANN+HUMMEL logo

Product profile

8040-TS80-UWAN

This is an 8" TS80 series advanced nanofiltration membrane element with an ANM polyamide membrane.

NF
MANN+HUMMEL logo

Product profile

8040-TS83-TSA

This 8040-TS83-TSA is an 8-inch spiral wound nanofiltration membrane element with a fiberglass outer wrap and TriSep Style Core Tube.

NF
MANN+HUMMEL logo

Product profile

8040-TS83-TSAN

The 8040-TS83-TSAN is an 8-inch advanced nanofiltration membrane element from TriSep Membranes featuring a spiral-wound configuration with fiberglass outer wrap.

NF
MANN+HUMMEL logo

Product profile

8040-TS83-UWA

This 8040-TS83-UWA is a TriSep Nanofiltration membrane element with an advanced polyamide membrane.

NF
MANN+HUMMEL logo

Product profile

8040-TS83-UWAN

The 8040-TS83-UWAN is an 8" spiral wound advanced nanofiltration membrane element designed for water treatment.

Ultrafiltration Elements

10 product profiles

UF
MANN+HUMMEL logo

Product profile

4040-UE50-QSF

4040-UE50-QSF is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

UF
MANN+HUMMEL logo

Product profile

8040-UE50-QSA

This TriSep 8040-UE50-QSA is an 8-inch AUM advanced ultrafiltration membrane element with a 100,000 MWCO and a spiral-wound configuration.

UF
MANN+HUMMEL logo

Product profile

4040-UA60-TSA

4040-UA60-TSA is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

UF
MANN+HUMMEL logo

Product profile

8040-UA60-TSA

This is an 8" UA60 Ultrafiltration Element from TriSep Membranes with a spiral-wound configuration and fiberglass outer wrap.

UF
MANN+HUMMEL logo

Product profile

4040-UE10-QSF

4040-UE10-QSF is an ultrafiltration module for pretreatment, clarification, and barrier filtration duties in water-treatment systems.

UF
MANN+HUMMEL logo

Product profile

8040-UE10-QSA

This TriSep 8040-UE10-QSA is an advanced ultrafiltration membrane element designed for water treatment applications.

Show remaining Ultrafiltration Elements profiles (4)
UF
MANN+HUMMEL logo

Product profile

2540-UF10-QSF

The TriSep X-20™ is a durable reverse osmosis membrane designed for high fouling feed waters, featuring a polyamide-urea copolymer barrier layer and residual amino groups.

UF
MANN+HUMMEL logo

Product profile

TurboCleanR-UF-6338-UE10-31

The TriSep TurboCleanR-UF-6338-UE10-31 is a 6.3-inch spiral wound sanitary element designed for ultrafiltration applications.

UF
MANN+HUMMEL logo

Product profile

TurboCleanR-UF-6338-UE10-46

This TriSep TurboCleanR-UF-6338-UE10-46 is an advanced ultrafiltration membrane element with a nominal molecular weight cut-off of 10,000.

UF
MANN+HUMMEL logo

Product profile

TurboCleanR-UF-6338-UE10-65

This TriSep Membranes TurboCleanR-UF-6338-UE10-65 is an advanced ultrafiltration membrane element for water treatment applications.

Microfiltration

1 product profiles

NF
MANN+HUMMEL logo

Product profile

4040-TM10-QXF

The TRISEP® TS80 is a versatile nanofiltration (NF) membrane element designed for high solute rejection of both salts and uncharged organic solutes.

High Pressure

2 product profiles

RO Membranes
MANN+HUMMEL logo

Product profile

Trisep HPR

The TRISEP HPR series is a line of high-pressure industrial membrane elements designed for challenging water purification applications.

NF
MANN+HUMMEL logo

Product profile

Trisep UPR

The Trisep UPR series consists of ultra-high pressure industrial reverse osmosis and nanofiltration membrane elements designed for a maximum operating pressure of 120 bar...

High Rejection NF Elements

1 product profiles

NF
MANN+HUMMEL logo

Product profile

PLT 2540-TS40-31

The TriSep PLT 2540-TS40-31 is a High Rejection Process Nanofiltration Element designed for demineralization and concentration of organic solutes.

TriSep Membranes RO Membranes | Models & Datasheets | AquaChain Guide