8040-ACM2-TSAN

Summary

Product identification

• Model: 8040-ACM2-TSAN
• Series: 8" ACM RO Element Series
• Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
• Configuration: Spiral Wound, Fiberglass Outer Wrap

Operating limits

• Maximum SDI (15 minutes): 5.0
• Maximum Turbidity: 1 NTU
• Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: <0.1 ppm
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1

Product water

Performance is based on test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation. Permeate flow is clean water flux at standard conditions above. Individual element's permeate flow may vary +/- 15%.

• Permeate Flow: 9,700 GPD (36.0 m³/day)
• Average Salt Rejection: 98.50%
• Minimum Salt Rejection: 99.50% (Note: This appears to be higher than average salt rejection in the source text and should be verified in the official PDF.)

Mechanical / hydraulic

Units are in pounds and inches, with units in parentheses in kilograms and millimeters.

• Element Weight: 45 (20)
• Length (A): 40.0 (1,016)
• Diameter (B): 7.9 (200)
• Permeate Tube (C): 1.50 (38.1)
• Core Tube Style: TriSep Style Core Tube
• Active Membrane Area: 365 ft² (33.5 m²)
• Feed Spacer: 0.031" thick diamond spacer

---

Disclaimer: This summary is generated from extracted text and may omit figures, footnotes, or the latest revisions. Contractual data should always be confirmed with the official OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet