Datasheet summary
8040-ACM4-TSA
Engineering summary from PDF text extraction for 8040-ACM4-TSA. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: 8040-ACM4-TSA
- Series: 8" ACM-LP Low Pressure RO Element Series
- Membrane Type: ACM-LP Fully Aromatic Polyamide Low Pressure Advanced Composite
- Configuration: Spiral Wound, Fiberglass Outer Wrap
Operating limits
- Recommended Applied Pressure: 50 - 300 psi (3 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
Performance
Performance is based on the following test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
- Permeate Flow: 14,600 GPD (55.0 m³/day)
- Note: Permeate flow is clean water flux at standard conditions. Individual element's permeate flow may vary +/- 15%.
- Average Salt Rejection: 98.00%
- Minimum Salt Rejection: 99.00%
Mechanical / hydraulic
- Element Weight: 45 lbs (20 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 7.9 inches (200 mm)
- Permeate Tube (C): 1.50 inches (38.1 mm)
- Core Tube Style: TriSep Style
- Feed Spacer: 0.031" thick diamond spacer
- Active Membrane Area: 365 ft² (33.5 m²)
Disclaimer: This summary is based on the provided text extract. The full OEM PDF datasheet may contain additional figures, footnotes, or more recent revisions. Contractual data for any project must match the specific OEM PDF revision used on that project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.