8040-ACM5-UWA

Summary

Product identification

• Product Series: 8" ACM-LP Low Pressure RO Element Series
• Model: 8040-ACM5-UWA
• Core Tube: TriSep Style Core Tube
• Membrane Type: ACM-LP Fully Aromatic Polyamide Low Pressure Advanced Composite
• Configuration: Spiral Wound, Fiberglass Outer Wrap
• Active Membrane Area: 400 ft² (37.2 m²)
• Feed Spacer: 0.028" thick diamond spacer

Operating limits

• Recommended Applied Pressure: 50 - 300 psi (3 - 21 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Chlorine Tolerance: <0.1 ppm
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1

Feed water

• Feedwater pH Range: 2 - 11 continuous
• Maximum SDI (15 minutes): 4.0
• Maximum Turbidity: 1 NTU

Product water

Performance is based on the following test conditions: 2,000.0 ppm NaCl, 150.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.

• Permeate Flow: 12,500 GPD (47.0 m³/day)*
• Average Salt Rejection: 97.50%
• Minimum Salt Rejection: 98.50%

* Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.

Mechanical / hydraulic

• Element Weight: 50 lbs (23 kg)
• Length (A): 40.0 inches (1,016 mm)
• Diameter (B): 7.9 inches (200 mm)
• Permeate Tube (C): 1.50 inches (38.1 mm)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet