8040-ACM5-UWAN

Summary

Product identification

• Model: 8040-ACM5-UWAN
• Series: 8" ACM-LP Low Pressure RO Element Series
• Membrane Type: ACM-LP Fully Aromatic Polyamide Low Pressure Advanced Composite
• Configuration: Spiral Wound, Fiberglass Outer Wrap
• Core Tube: TriSep Style

Operating limits

• Recommended Applied Pressure: 50 - 300 psi (3 - 21 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: <0.1 ppm

Feed water

• Maximum SDI (15 minutes): 4.0
• Maximum Turbidity: 1 NTU

Product water

Performance is based on the following test conditions: 2,000.00 ppm NaCl, 150.00 psi, 25°C, 15% recovery, pH 8.00, 30 minutes operation.

• Active Membrane Area: 400 ft² (37.2 m²)
• Permeate flow (for 8040-ACM5-UWAN): 12,500 GPD (47.0 m³/day)*
• Average Salt Rejection: 97.50%
• Minimum Salt Rejection: 98.50%

* Permeate flow is clean water flux at standard conditions. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.

Mechanical / hydraulic

• Element Weight: 50 lbs (23 kg)
• Length (A): 40.00 inches (1,016 mm)
• Diameter (B): 7.9 inches (200 mm)
• Permeate Tube (C): 1.50 inches (38.1 mm)
• Feed Spacer: 0.028" thick diamond spacer

---

Disclaimer: This summary is based solely on the extracted text. It may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet