8040-TS80-TSAN

Summary

Product identification

• Product Series: 8" TS80 Nanofiltration Element Series
• Model: 8040-TS80-TSAN
• Membrane Type: ANM Aromatic Polyamide Advanced Nanofiltration Membrane
• Configuration: Spiral Wound, Fiberglass Outer Wrap
• Active Membrane Area: 365 ft² (33.5 m²)

Operating limits

• Maximum SDI (15 minutes): 5.0
• Maximum Turbidity: 1 NTU
• Recommended Applied Pressure: 40 - 200 psi (3 - 14 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: <0.1 ppm
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1

Performance

Performance is based on the following test conditions: 2,000.0 ppm MgSO₄, 110.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.

• Model 8040-TS80-TSAN
  • Average Salt Rejection: 99.00%
  • Minimum Salt Rejection: 97.00%
  • Permeate Flow: 9,000 GPD (34.0 m³/day)*
  • *Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.

Mechanical / hydraulic

(Units in pounds and inches; units in parentheses in kilograms and millimeters)

• Element Weight: 45 (20)
• Length (A): 40.0 (1,016)
• Diameter (B): 7.9 (200)
• Permeate Tube (C): 1.50 (38.1)
• Mechanical Configuration Feed Spacer: 0.031" thick diamond spacer

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet