8040-TS83-TSAN

Summary

Product identification

• Product Series: 8" TS80 Nanofiltration Element Series
• Model: 8040-TS83-TSAN
• Membrane Type: ANM Aromatic Polyamide Advanced Nanofiltration Membrane
• Configuration: Spiral Wound, Fiberglass Outer Wrap
• Core Tube Style: TriSep

Operating limits

• Recommended Applied Pressure: 40 - 200 psi (3 - 14 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: <0.1 ppm
• Maximum SDI (15 minutes): 5.0
• Maximum Turbidity: 1 NTU
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1

Feed water

Performance is based on the following test conditions:

• Solute: 2,000.0 ppm MgSO₄
• Applied Pressure: 110.0 psi
• Temperature: 25°C
• Recovery: 15%
• pH: 8.0
• Operation Duration: 30 minutes

Product water

• Active Membrane Area: 365 ft² (33.5 m²)
• Permeate Flow: 10,000 GPD (37.0 m³/day)*
• Average Salt Rejection: 97.00%
• Minimum Salt Rejection: 98.50%

*Permeate flow is clean water flux at standard conditions. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.

Mechanical / hydraulic

• Element Weight: 45 lbs (20 kg)
• Length (A): 40.0 inches (1,016 mm)
• Diameter (B): 7.9 inches (200 mm)
• Permeate Tube (C): 1.50 inches (38.1 mm)
• Feed Spacer: 0.031" thick diamond spacer

---

Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet