8040-TS83-UWAN

Summary

Product identification

• Model: 8040-TS83-UWAN
• Series: 8" TS80 Nanofiltration Element Series
• Membrane Type: ANM Aromatic Polyamide Advanced Nanofiltration Membrane
• Configuration: Spiral Wound, Fiberglass Outer Wrap

Mechanical / hydraulic

• Core Tube Style: TriSep
• Element Weight: 50 lbs (23 kg)
• Length (A): 40.0 inches (1,016 mm)
• Diameter (B): 7.9 inches (200 mm)
• Permeate Tube (C): 1.50 inches (38.1 mm)
• Feed Spacer: 0.028" thick diamond spacer

Operating limits

• Recommended Applied Pressure: 40 - 200 psi (3 - 14 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: <0.1 ppm
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1

Feed water

• Maximum SDI (15 minutes): 4.0
• Maximum Turbidity: 1 NTU

Product water

• Performance is based on the following test conditions: 2,000.0 ppm MgSO₄, 110.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
• Performance (Model 8040-TS83-UWAN):
  • Permeate flow: 11,000 GPD (41.0 m³/day)
  • Average Salt Rejection (%): 97.00
  • Minimum Salt Rejection (%): 98.50

Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.

---

Disclaimer: This summary is generated from an extracted text and may miss figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet