8040-UA60-TSA

Summary

Product identification

• Series: 8" UA60 Ultrafiltration Element
• Model: 8040-UA60-TSA
• Membrane Type: UA60 Polyamide Advanced Ultrafiltration Membrane
• Configuration: Spiral Wound, Fiberglass Outer Wrap
• Core Tube: TriSep Style
• Active Membrane Area: 365 ft² (33.5 m²)
• Feed Spacer: 0.031" thick diamond spacer

Operating limits

• Recommended Applied Pressure: 40 - 200 psi (3 - 14 bar)
• Maximum Applied Pressure: 600 psi (41 bar)
• Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
• Feedwater pH Range: 2 - 11 continuous
• Chlorine Tolerance: 0.5 ppm nominal, 1.0 ppm max
• Maximum Feed Flow: 80 GPM (18 m³/hr)
• Minimum Brine Flow/Permeate Flow Ratio: 5:1
• Maximum SDI (15 minutes): 5.0
• Maximum Turbidity: 2 NTU

Feed water

• Performance Test Conditions:
  • 2,000.0 ppm MgSO₄
  • 110.0 psi
  • 25°C
  • 15% recovery
  • pH 8.0
  • 30 minutes operation

Product water

• Permeate Flow (Model 8040-UA60-TSA): 9,500 GPD (35.0 m³/day)
  • Note: Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
• M.W.C.O. (Molecular Weight Cut Off): 3,500

Mechanical / hydraulic

• Element Weight: 45 pounds (20 kilograms)
• Length (A): 40.0 inches (1,016 millimeters)
• Diameter (B): 7.9 inches (200 millimeters)
• Permeate Tube (C): 1.50 inches (38.1 millimeters)

---

Disclaimer This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. For contractual purposes, refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet