Datasheet summary
8040-UE50-QSA
Engineering summary from PDF text extraction for 8040-UE50-QSA. Verify every value with the OEM datasheet.
Summary
Product identification
- Series: 8" AUM Ultrafiltration Element
- Model: 8040-UE50-QSA
- Membrane Type: AUM Advanced Ultrafiltration Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Active Membrane Area: 360 ft² (33.4 m²)
- M.W.C.O.: 100,000
Operating limits
- Recommended Applied Pressure: 20 - 200 psi (1.4 - 14 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: 10.0 ppm
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
Product water
- Nominal Permeate Flow: 20,000 GPD (75.0 m³/day)
- Note: Permeate flow is clean water flux at standard conditions. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
- Performance Test Conditions: 500.0 ppm Dextran, 30.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
Mechanical / hydraulic
- Element Weight: 45 lbs (20 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 7.9 inches (200 mm)
- Permeate Tube (C): 1.50 inches (38.1 mm)
- Core Tube: TriSep Style
- Feed Spacer: 0.031" thick diamond spacer
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.